2-14. At the bottom of a bottle a bubble within carbonated water has a diameter of 0.2 mm. Determine the bubble's diameter when it reaches the surface. The temperature of the water and bubbles is 10°C, and the atmospheric pressure is 101 kPa. Assume that the density of the water is the same as that of pure water. 300 mm

2-14. At the bottom of a bottle a bubble within carbonated water has a diameter of 0.2 mm. Determine the bubble's diameter when it reaches the surface. The temperature of the water and bubbles is 10°C, and the atmospheric pressure is 101 kPa. Assume that the density of the water is the same as that of pure water. 300 mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Find the approximate depression of mercury at 20°C in a capillary tube of diameter 0.5 mm. (Surface tension of mercury at the same temperature is 0.514 N/m, contact angle of mercury and tube is 140°) -23.6 mm -0.0236 mm O -0.236 mm O -2.36 mm
Consider a soap bubble 2mm in diameter and a droplet of water also 2mm in diameter that are falling in air. If the value of the surface tension for the film of the soap bubble is assumed to be the same as that of water, which has a greater pressure?
I need the answer as soon as possible
In a test to determine the bulk modulus of a liquid it was found that as the absolute pressure was changed from 15 to 3000 psi the volume decreased from 10.240 to 10.138 in3. Determine the bulk modulus (in psi) for this liquid.
A soap bubble of 60 mm diameter has a gauge pressure of 2 N/m Estimate the surface tension of bubble. Select one: 0.10 N/m 0.3 N/m O 0.015 N/m O 0.22 N/m
Determine the difference in pressure (kPa) between A and B. a= 3.11 meters b= 1.04 meters mercury a b oil a
A closed tank whose bottom is 18 inches in diameter is filled with three liquids: 4 inches of carbon tetracloride (SG=1.59), 2 inches of water and 12 inches of syrup (SG= 1.31). The aire chamber in the tank is pressurized at 1296 psf. A.) Determine the pressure at the interface of carbon tetrachloride and syrup. B.)Determine the difference in pressure between the interface of water and syrup and the interface of carbon tetrachloride and syrup. C.)Compute the hydrostatic pressure (in psf) acting at the bottom of the tank.
Q.11 A liquid compressed in a cylinder has a volume of 0.0113 m³ at 6.87 x 106 N/ 3 m² pressure. When the pressure is raised to 12.73 x 106 N/m² volume becomes 0.0112 3 m³ Keeping the temperature constant at 20 °C. The compressibility of liquid m²/N.
During a steady flow process, the pressure of the working substance drops from 200 to 20 psia, the speed increases from 200 to 800 ft/s the internal energy decreases 20 BTU/lb and the specific volume increases from 2 to 10 ft³/lb. No heat transferred. Determine the following: a)AKE in ft-lb;/Ibm b)APE in ft-lb/lbm c)AW: (flow work) ft-lb:/lbm d)AH in BTU e) Net work in hp for 15 lb/min of fluid (use mass flow rate for this item only)
Question 5 In a test to determine the bulk modulus of a liquid it was found that as the absolute pressure was changed from 15 to 3000 psi the volume decreased from 10.240 to 10.138 in' Determine the bulk modulus for this liquid.
A tank contains the following liquids: water with h= 2.5 m sea oil (s=0.89) with h=2.6 m mercury (s=13.6) with h= 0.8 m olive oil (s=1.37) with h=3.8 m glycerin (s= 1.2) with h= 2.7 m Compute the absolute pressure in kPa at the interface of olive oil and mercury.
mm mim 0.20 m Q3. A. soap bubble 60.0 mm in diameter has an internal pressure in excess of the outside pressure of 25 N/m2. What is the tension in the soap film. 3. What is the non-Newtonian fluids and what are types? (mention 3 examples).