1. The viscous PDMS (Polydimethylsiloxane) coated on the glass (Sylagard 184, Dowcoaning) is using the spin coating material. If we fix the viscosity, density of coating material, initial thickness at 4000 cP, 965 kg/m3 and 0.105 cm, and then, the rotation time is fixed at time of 300s and the rotation of device start from 500 to 6000 RPM. Calculate the final thickness of the film at angular speed from 500-6000rpm (step by 500rpm) and draw the relationship between the final thickness (h) and angular speed (w).

1. The viscous PDMS (Polydimethylsiloxane) coated on the glass (Sylagard 184, Dowcoaning) is using the spin coating material. If we fix the viscosity, density of coating material, initial thickness at 4000 cP, 965 kg/m3 and 0.105 cm, and then, the rotation time is fixed at time of 300s and the rotation of device start from 500 to 6000 RPM. Calculate the final thickness of the film at angular speed from 500-6000rpm (step by 500rpm) and draw the relationship between the final thickness (h) and angular speed (w).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An aluminum film was deposited at a rate of 1 μm/min in vacuum at 25 °C. It was found that the oxygen content in the film was 0.01 at% (remember that is only O). What was the total air pressure in the system (assuming air is 20% O2)?
Hot isostatic pressing is to be used to produce the femoral head components of hip implants made from a novel grade of zirconia. A series of manufacturing trials have demonstrated that the processing route results in post-sintered surface features 43- 107 μm (mean 74 µm) in size. In clinical use it is anticipated that the femoral heads will be loaded to maximum stress level of 50% of its tensile strength once implanted. What is the critical flaw size when in service and will the implant require polishing for it to withstand loading during clinical use? Where: . You may assume a value of 1.4 for Y The grade of zirconia has a Tensile strength of 980 MPa and a fracture toughness of 11 MPa.m 0.5 ● Select one or more: a. 81.8 μm b. Yes c. 20.5 μm Od. No e. Of. 163.6 μm 40.9 μη
@ Draw a neat sketch for a seive tray column for gas-liquid contact. Label the main parts of such column? And what are other types of trays?
As the lead engineer for a LPG storage project, you are overseeing the design of pressure vesselssuch as those shown below. Identify which test (or tests) is mostsuitable to pick a material and thickness for the spherical shell of the pressure vessel. Why these are the relevant tests. Explain what information these tests provide and why it is important to determining material and thickness.
A new sintering regime is proposed for producing Alumina acetabular liners for total hip replacement. If the alumina has a plane strain fracture toughness of 2.7 MPa.mº.5, an ultimate tensile strength of 307 MPa and Y is assumed to be 1.2, which of the following would be the maximum acceptable size of surface flaw? Select one: Ⓒa. 4.8 μm O b. 9.6 μm O c. 19.2 μm O d. 2.4 μm
Alplas Plastics uses an extruder in which the barrel diameter = 0.4 m and length = 6.0 m. The extruder screw rotates at 65 rev/min; it has channel depth = 0.02 m and flight angle = 16°. The plastic melt has a shear viscosity = 85 Pa-s. Determine: (a) Qmax and pmax; (b) the shape factor Ks for a circular die opening in which Dd = 0.009 m and Ld = 0.03 m; and (c) the values of Q and p at the operating point
Hot isostatic pressing is to be used to produce the femoral head components of hip implants made from a novel grade of zirconia. A series of manufacturing trials have demonstrated that the processing route results in post-sintered surface features 43-107 µm (mean 74 µm) in size. In clinical use it is anticipated that the femoral heads will be loaded to maximum stress level of 50% of its tensile strength once implanted. What is the critical flaw size when in service and will the implant require polishing for it to withstand loading during clinical use? Where: • You may assume a value of 1.4 for Y • The grade of zirconia has a Tensile strength of 980 MPa and a fracture toughness of 11 MPa.m0.5 Select one or more: a. 81.8 μm b. 20.5 μm c. 40.9 μm Od. 163.6 μm De. O f. Yes No
(a) Community-wide mask wearing may contribute to the control of Covid-19 by reducing the amount of emission of infected saliva and respiratory droplets from persons with subclinical or mild Covid-19. However, of concern is the manner in which they are disposed of and becoming a threat to the environment. Depending on the material, these masks could last years, even decades, in the environment due to the fact that they are not biodegradable. As a khalifah, you decided to design the facemask that can minimise the pollution. In order to do that, you have to: (i) Determine the properties of materials required to suit the purpose in Q1 (a).
Answer the folowing with True or False. Density of a foam material depends on the wall thickness and size of its foam cells. ( ) BCC structure is more densely packed than the FCC structure. ( ) The anion – cation size ratio has an important influence in determining the crystal structure of ionic solids. ( ) CFRP and GFRP are examples of hybrid materials. ( ) The density of a material is determined exclusively by its atomic weight. ( ) Body diagonal in BCC structure has Miller indices of [111]. ( ) The relationship s = Ee is known the Ohms law. ( ) A closed packed triangular plane in FCC crystal has Miller indices of (111). ( )
Discuss the errors and their sources which might occurred in this experiment and affected its results
What is the effective fiber diameter of a membrane filter with a pore size of 1 μm? The solidity is 0.15, the thickness is 150 μm, and the pressure drop is 5.0 cm Hg at U0 = 50 cm/s. (b) A filter has an effective fiber diameter of 2 μm, a solidity of 0.05, and thickness of 0.5 mm. The face velocity is 5 cm/s. Considering collection due to interception, impaction, and diffusion, calculate the penetration of 0.3 μm NaCl particles (ρp= 2.2 g/cm3) through the filter and the figure of merit.
A carbonate whole core 700 cc is placed in cell two of a Boyles Law device. Each of the cells has a volume of 1,000 cc. Cell one is pressured to 50.0 psig. Cell two is evacuated. The cells are connected and the resulting pressure is 28.1 psig. Calculate the porosity of the core