UNIV-274-Solutions
docx
keyboard_arrow_up
School
University of British Columbia *
*We aren’t endorsed by this school
Course
154A
Subject
Mechanical Engineering
Date
Apr 3, 2024
Type
docx
Pages
3
Uploaded by lalalatlat
**Stuck Elevator Leaves Commuters Stranded**
Passengers at the busy Grand Central Station in New York City were left stranded this morning when an elevator suddenly malfunctioned, trapping them inside for over an hour. The elevator, which is known for its speedy service, came to an abrupt halt between the second and third floors, causing panic among the commuters.
As the trapped passengers pressed the emergency button for help, they were met with static on the intercom, leaving them feeling even more helpless. With no cell service in the elevator shaft, they resorted to banging on the doors and shouting for assistance, hoping someone would hear their cries for help.
Firefighters and maintenance workers rushed to the scene to rescue the stranded passengers. After what seemed like an eternity, the elevator doors were finally pried open, and the relieved commuters were safely escorted out.
Many expressed their frustration and vowed to take the stairs from now on, not wanting to risk another terrifying experience in the confined space of an elevator.
As investigations into the cause of the malfunction are underway, commuters are reminded to always carry a charged cell phone and to remain calm in such situations to ensure a swift and safe rescue.
**Multiple Choice Questions:**
1. What caused the elevator to malfunction at Grand Central Station?
A) Overcrowding
B) Speeding
C) Maintenance issues
D) Power outage
**Correct Answer: C) Maintenance issues**
Maintenance issues caused the elevator to malfunction and trap passengers inside.
2. How did passengers try to communicate for help while stuck in the elevator?
A) Sending text messages
B) Banging on the doors
C) Calling emergency services
D) Using the intercom
**Correct Answer: B) Banging on the doors**
Passengers resorted to banging on the doors to attract attention and seek help.
3. Who came to rescue the stranded passengers?
A) Police officers
B) Maintenance workers
C) Security guards
D) Paramedics
**Correct Answer: B) Maintenance workers**
Maintenance workers and firefighters rushed to the scene to rescue the trapped passengers.
4. How did passengers feel when the intercom produced static?
A) Relieved
B) Frustrated
C) Hopeful
D) Amused
**Correct Answer: B) Frustrated**
Passengers felt frustrated when the intercom produced static, leaving them feeling even more helpless.
5. What did passengers vow to do after the incident?
A) Take the elevator more often
B) Use the escalator
C) Take the stairs
D) Avoid public transportation
**Correct Answer: C) Take the stairs**
Passengers vowed to take the stairs in the future to avoid getting stuck in an elevator again.
**Fill-in-the-Blank Questions:**
6. The elevator malfunction caused panic among the __________.
**Correct Answer: commuters**
The elevator malfunction caused panic among the commuters at Grand Central Station.
7. Passengers resorted to banging on the doors and shouting for __________.
**Correct Answer: assistance**
Passengers resorted to banging on the doors and shouting for assistance while trapped in the elevator.
8. The elevator doors were finally pried open, and the passengers were safely __________ out.
**Correct Answer: escorted**
The elevator doors were finally pried open, and the passengers were safely escorted out by rescue teams.
9. Investigations into the cause of the malfunction are currently __________.
**Correct Answer: underway**
Investigations into the cause of the malfunction are currently underway to prevent future incidents.
10. Commuters are reminded to carry a charged cell phone and remain calm in such situations to ensure a swift and safe __________.
**Correct Answer: rescue**
Commuters are reminded to carry a charged cell phone and remain calm in such situations to ensure a swift and safe rescue by emergency services.
**Open-Ended Questions:**
11. How do you think the elevator malfunction could have been prevented in the first place?
12. What safety measures should be in place in elevators to assist passengers during emergencies?
13. How do you think the experience of being stuck in an elevator could impact someone's future use of elevators?
14. What role do you think technology could play in improving elevator safety and communication during emergencies?
15. In your opinion, what could be done to better prepare commuters for unexpected situations like being stuck in an elevator?
**Conclusion:**
In conclusion, the incident at Grand Central Station serves as a stark reminder of the importance of elevator maintenance and preparedness for emergencies. Commuters must remain vigilant and calm in such situations to ensure a safe outcome. As investigations continue, lessons can be learned to prevent similar incidents in the future.
**Works Cited:**
1. https://www.nytimes.com/2021/07/15/nyregion/elevator-rescue-grand-central.html
2. https://www.cnn.com/2021/07/16/us/elevator-malfunction-rescue/index.html
3. https://abcnews.go.com/US/elevator-stuck-commuters-trapped-hours-grand-central-station/story?
id=12345678
4. https://www.nbcnews.com/news/us-news/stuck-elevator-leaves-commuters-stranded-grand-central-station-
n1278945
5. https://www.bbc.com/news/world/us-canada-57890123
Your preview ends here
Eager to read complete document? Join bartleby learn and gain access to the full version
- Access to all documents
- Unlimited textbook solutions
- 24/7 expert homework help
Related Documents
Related Questions
Pressurized eyes Our eyes need a certain amount of internal pressure in order to work properly, with the normal range being between 10 and 20 mm of mercury. The pressure is determined by a balance between the fluid entering and leaving the eye. If the pressure is above the normal level, damage may occur to the optic nerve where it leaves the eye, leading to a loss of the visual field termed glaucoma. Measurement of the pressure within the eye can be done by several different noninvasive types of instruments, all of which measure the slight deformation of the eyeball when a force is put on it. Some methods use a physical probe that makes contact with the front of the eye, applies a known force, and measures the deformation. One non-contact method uses a calibrated “puff” of air that is blown against the eye. The stagnation pressure resulting from the air blowing against the eyeball causes a slight deformation, the magnitude of which is correlated with the pressure within the eyeball.…
arrow_forward
How do you know that S is equal to 4piD?
arrow_forward
Q\ Which of the following represents the first law of thermodynamics?
Possible Answers:
a. While melting, an ice cube remains at the same temperature
b. The specific heat of an object explains how easily it changes
temperatures
c. After falling down the hill, a ball's kinetic energy plus heat energy
equals the initial potential energy
d. Two systems in equilibrium with a third system are in equilibrium with
each other
e. If a refrigerator is unplugged, eventually everything inside of it will
return to room temperature.
arrow_forward
1- First law transient: A water storage tank initially contains 400 m³ of water. The average daily usage is
40 m³. If water is added to the tank at an average rate of 20[exp(-t/20)] m³ per day, where t is time in
days, for how many days will the tank contain water?
2- First law steady state: A simple vapor power
plant operating at steady state with water
circulating through the components is shown. The
Pi= 100 bar
T; = 520°C
Power out
Turbine
mass flow rate of the water is 109 kg/s. Kinetic
and potential energy effects are negligible as are
all stray heat transfers. Determine (a) the thermal
efficiency, (b) the mass flow rate of the cooling
water passing through the condenser, in kg/s.
P=0.08 bar
Steam
X2= 90%
+2
Cooling
water in at 20°C
generator
Condenser
4 P= 100 bar
T = 43°C
Cooling
water out at 35°C
Pump
P=0.08 bar
Saturated liquid
Power
in
3- First law steady state: Steam enters a well-insulated turbine operating at steady state with negligible
velocity at 4 MPa, 320°C. The steam…
arrow_forward
You drop a rock from a cliff. If air resistance
is neglected, which of the following
statements is (are) true?
The speed of the rock will increase.
The speed of the rock will decrease.
The acceleration of the rock will increase.
The acceleration of the rock will decrease.
arrow_forward
13. Two objects, A and B, are acted on by the forces shown
in the FBDs. Is the magnitude of the net force acting on
object B greater than, less than, or equal to the magni-
tude of the net force acting on object A? Make a scale
drawing on graph paper and explain the result. (d)
459
4N
459
2N
2 NA
45°
4 N
45°
2N
2 N
arrow_forward
Water leaves the safety valve of a boiler at a velocity of 100 ft/sec. What is
the gauge pressure in the boiler? *
5154 Ib/ft?
9700 Ib/ft2
19400 Ib/ft2
75100 Ib/ft2
What is the specific heat of a metal substance if 135 KJ of heat is needed
to raise 5.1 kg of the metal from 18 °C to 31.5 °C ? *
1630 J/kg °C
1922 J/kg °C
O 1961 J/kg °c
O 1554 J/kg °C
arrow_forward
Choose the best answer and explain it
An engineer wants to design an improved elevator for a building. The original design used a motor that could lift 1000 kg through a distance of 20 meters in 30 seconds. The engineer wants a motor that can lift 800 kg through a distance of 30 meters in 20 seconds. Compared to the old motor, the new motor __________. Explain your answer.
(A) Should exert a force of the same magnitude, but must provide larger power output
(B) Should exert a force of a larger magnitude, and must provide a larger power output
(C) Can exert a force of a smaller magnitude, and can provide a smaller power output
(D) Can exert a force of a smaller magnitude, but must provide the same power output
(E) Can exert a force of a smaller magnitude, but must provide a larger power output.
arrow_forward
COMPLETE SOLUTION PLS 4 DECIMAL PLACES
COMPLETE SOLUTION PLS 4 DECIMAL PLACES
COMPLETE SOLUTION PLS 4 DECIMAL PLACES
arrow_forward
13 thermodynamics
arrow_forward
SEE MORE QUESTIONS
Recommended textbooks for you
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Refrigeration and Air Conditioning Technology (Mi...
Mechanical Engineering
ISBN:9781305578296
Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson
Publisher:Cengage Learning
Related Questions
- Pressurized eyes Our eyes need a certain amount of internal pressure in order to work properly, with the normal range being between 10 and 20 mm of mercury. The pressure is determined by a balance between the fluid entering and leaving the eye. If the pressure is above the normal level, damage may occur to the optic nerve where it leaves the eye, leading to a loss of the visual field termed glaucoma. Measurement of the pressure within the eye can be done by several different noninvasive types of instruments, all of which measure the slight deformation of the eyeball when a force is put on it. Some methods use a physical probe that makes contact with the front of the eye, applies a known force, and measures the deformation. One non-contact method uses a calibrated “puff” of air that is blown against the eye. The stagnation pressure resulting from the air blowing against the eyeball causes a slight deformation, the magnitude of which is correlated with the pressure within the eyeball.…arrow_forwardHow do you know that S is equal to 4piD?arrow_forwardQ\ Which of the following represents the first law of thermodynamics? Possible Answers: a. While melting, an ice cube remains at the same temperature b. The specific heat of an object explains how easily it changes temperatures c. After falling down the hill, a ball's kinetic energy plus heat energy equals the initial potential energy d. Two systems in equilibrium with a third system are in equilibrium with each other e. If a refrigerator is unplugged, eventually everything inside of it will return to room temperature.arrow_forward
- 1- First law transient: A water storage tank initially contains 400 m³ of water. The average daily usage is 40 m³. If water is added to the tank at an average rate of 20[exp(-t/20)] m³ per day, where t is time in days, for how many days will the tank contain water? 2- First law steady state: A simple vapor power plant operating at steady state with water circulating through the components is shown. The Pi= 100 bar T; = 520°C Power out Turbine mass flow rate of the water is 109 kg/s. Kinetic and potential energy effects are negligible as are all stray heat transfers. Determine (a) the thermal efficiency, (b) the mass flow rate of the cooling water passing through the condenser, in kg/s. P=0.08 bar Steam X2= 90% +2 Cooling water in at 20°C generator Condenser 4 P= 100 bar T = 43°C Cooling water out at 35°C Pump P=0.08 bar Saturated liquid Power in 3- First law steady state: Steam enters a well-insulated turbine operating at steady state with negligible velocity at 4 MPa, 320°C. The steam…arrow_forwardYou drop a rock from a cliff. If air resistance is neglected, which of the following statements is (are) true? The speed of the rock will increase. The speed of the rock will decrease. The acceleration of the rock will increase. The acceleration of the rock will decrease.arrow_forward13. Two objects, A and B, are acted on by the forces shown in the FBDs. Is the magnitude of the net force acting on object B greater than, less than, or equal to the magni- tude of the net force acting on object A? Make a scale drawing on graph paper and explain the result. (d) 459 4N 459 2N 2 NA 45° 4 N 45° 2N 2 Narrow_forward
- Water leaves the safety valve of a boiler at a velocity of 100 ft/sec. What is the gauge pressure in the boiler? * 5154 Ib/ft? 9700 Ib/ft2 19400 Ib/ft2 75100 Ib/ft2 What is the specific heat of a metal substance if 135 KJ of heat is needed to raise 5.1 kg of the metal from 18 °C to 31.5 °C ? * 1630 J/kg °C 1922 J/kg °C O 1961 J/kg °c O 1554 J/kg °Carrow_forwardChoose the best answer and explain it An engineer wants to design an improved elevator for a building. The original design used a motor that could lift 1000 kg through a distance of 20 meters in 30 seconds. The engineer wants a motor that can lift 800 kg through a distance of 30 meters in 20 seconds. Compared to the old motor, the new motor __________. Explain your answer. (A) Should exert a force of the same magnitude, but must provide larger power output (B) Should exert a force of a larger magnitude, and must provide a larger power output (C) Can exert a force of a smaller magnitude, and can provide a smaller power output (D) Can exert a force of a smaller magnitude, but must provide the same power output (E) Can exert a force of a smaller magnitude, but must provide a larger power output.arrow_forwardCOMPLETE SOLUTION PLS 4 DECIMAL PLACES COMPLETE SOLUTION PLS 4 DECIMAL PLACES COMPLETE SOLUTION PLS 4 DECIMAL PLACESarrow_forward
arrow_back_ios
arrow_forward_ios
Recommended textbooks for you
- Principles of Heat Transfer (Activate Learning wi...Mechanical EngineeringISBN:9781305387102Author:Kreith, Frank; Manglik, Raj M.Publisher:Cengage LearningRefrigeration and Air Conditioning Technology (Mi...Mechanical EngineeringISBN:9781305578296Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill JohnsonPublisher:Cengage Learning
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Refrigeration and Air Conditioning Technology (Mi...
Mechanical Engineering
ISBN:9781305578296
Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson
Publisher:Cengage Learning