Artificial_Intelligence_Application_in_M

pdf

School

University of Southern California *

*We aren’t endorsed by this school

Course

303

Subject

Mechanical Engineering

Date

Oct 30, 2023

Type

pdf

Pages

Uploaded by CoachFoxMaster925

Selection of our books indexed in the Book Citation Index in Web of Science™ Core Collection (BKCI) Interested in publishing with us? Contact book.department@intechopen.com Numbers displayed above are based on latest data collected. For more information visit www.intechopen.com Open access books available Countries delivered to Contributors from top 500 universities International authors and editors Our authors are among the most cited scientists Downloads We are IntechOpen, the world’s leading publisher of Open Access books Built by scientists, for scientists 12.2% 137,000 170M TOP 1% 154 5,500

Chapter 14 Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis Yasir Hassan Ali Additional information is available at the end of the chapter http://dx.doi.org/10.5772/intechopen.74932 Abstract The subject of machine condition monitoring and fault diagnosis as a part of system maintenance has gained a lot of interest due to the potential benefts to be learned from reduced maintenance budgets, enhanced productivity and improved machine availabil- ity. Artifcial intelligence (AI) is a successful method of machine condition monitoring and fault diagnosis since these techniques are used as tools for routine maintenance. This chapter atempts to summarize and review the recent research and developments in the feld of signal analysis through artifcial intelligence in machine condition monitoring and fault diagnosis. Intelligent systems such as artifcial neural network (ANN), fuzzy logic system (FLS), genetic algorithms (GA) and support vector machine (SVM) have pre - viously developed many diferent methods. However, the use of acoustic emission (AE) signal analysis and AI techniques for machine condition monitoring and fault diagnosis is still rare. In the future, the applications of AI in machine condition monitoring and fault diagnosis still need more encouragement and atention due to the gap in the literature. Keywords: artifcial intelligence, machine condition monitoring, fault diagnosis 1. Introduction In the current commercial production industries, there is an increasing trend towards the need for higher availability equipment that can work nonstop 24/7. Thus, any type of fail - ure, even minor, cannot be accepted as it can signifcantly afect the cost and the production. Hence, a very accurate monitoring of the machine condition and a proper fault diagnosis of the machine failure is necessary. The machine fault diagnosis had seen a vast improvement since the maintenance was provided after the machine had developed a fault and afected the © 2018 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

production. After that, it developed into preventive maintenance in the past few years before all the industries started using the condition-based maintenance. Preventive maintenance can be defned as providing maintenance before the machinery faces any fault. On the other hand, condition-based maintenance can be defned as providing maintenance depending on the data obtained from target measurements. The efciency of this technique is measured depending on the accurate diagnostic tactics, which are fulflled. For surviving in the current competitive market, the industries need to improve their product reliability and also reduce their production costs. The product reliability is more important for specifc productions like for the aviation, nuclear and the petrochemical industries where any failure can lead to severe environmental disasters. Currently, industries have shifted from using the condition-based (predictive) approach to the maintenance-based approach depending on the trending and the data analysis from one or more parameters that indicate the development or the presence of known failures or faults. The efective machine condition monitoring technique must be able to determine the onset of any fault in its early stages and also provide an accurate diagnosis regarding the type of the fault and its location. Ideally, the condition monitoring technique must give an overall and a detailed accurate health assessment of the equipment. However, conventionally, it would include the aural and the visual inspection (applying all the human senses), temperature monitoring, oil analysis (known as the wear debris analysis), measurement of the vibrations and its analysis, motor current signature analysis, airborne sounds and the acoustic emission (AE) analysis. In acoustic emission analysis, the waves are sent from an emission source and transferred to the surface by the transmission medium. The low-displacement or high-frequency mechanical waves can be picked up as electronic signals. The signal strength can be increased by using a preamplifer before the data are interpreted by the AE equipment [ 1, 2 ]. Furthermore, there is a growing interest in developing new technologies to overcome the problems in condition monitoring and diagnostics of complex industrial machinery appli- cations, which were not resolved till now. This provides excellent opportunities for the AI technology to grow continuously, with the rapid increase in the growth of intelligent informa - tion, sensor and data acquisition capabilities, combined with the rapid advances in intelligent signal processing techniques [ 3 ]. AI techniques that have been extensively used in the feld of engineering include genetic algorithms (GA), support vector machine (SVM), fuzzy logic system (FLS) and artifcial neural network (ANN). As compared to the common fault diag - nostic approaches, the AI techniques are instrumental if they can be improved [4 ]. Apart from improving performance, these techniques can be easily extended and modifed. These can be made adaptive by the integrating new data or information [ 5]. In this chapter, an atempt has been made to review the recent developments in the feld of acoustic emission signal analysis for fault diagnostics of the machine based on the aforemen- tioned AI techniques. These systems can be mutually integrated with each other and also with other traditional techniques. Artificial Intelligence - Emerging Trends and Applications 276

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version

Access to all documents
Unlimited textbook solutions
24/7 expert homework help

2. Artifcial intelligence The AI is the system that thinks and acts like a human being. It can also imitate human behaviour. It is majorly concerned with the development of a computer’s ability to engage in human-like thought processes like learning, reasoning and self-correction [ 6 ]. In the last decade, there has been a growing need in AI to solve the problems of engineering. Earlier, these problems were considered hard to be solved analytically or by using mathematical modelling and needed human intelligence [7 ]. Nowadays, there is an increased demand for advanced AE analysis tools. This chapter shows that many scholars have studied the detection and diagnostic of several faults by using the AE methods in AET and signal analysis. The AI techniques as mentioned earlier have also been extensively used in the feld of engineering. 2.1. Artifcial neural network-based fault diagnosis Artifcial neural network (ANN) is an information-processing approach. It works like the biological nervous systems like how the brain processes the information in the human body. The discussion was limited to an introduction of many components, which were involved in the ANN implementation. The network architecture or topology (including number of nodes in hidden layers, network connections, initial weight assignments and activation functions) played a key role in the ANN performance and depended on the problem at hand. Figure 1 shows a simple ANN and its constituents. In most cases, seting the correct topology was based on a heuristic model. On the other hand, the dimensions of the input and the output spaces gen- erally suggested the number of input and output layer nodes. Selecting the network complexity or regularization was very important [ 8 ]. When designing a neural network, there are a number of diferent parameters that must be decided. Some of these parameters are the number of Figure 1. Architecture of a neural network. Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 277

training iterations, the number of layers, the learning rate, the number of neurons per layer and the transfer functions, and so on. The beneft of ANN was that it had the ability to respond to an input patern in a desirable manner after the learning phase. Previous studies have proved that the efciency of ANN can predict the faults of machining processes. This technique was found to be very useful as it can be used in industrial automation in a more fexible manner [ 9 ]. ANN has been extensively used in health diagnosis of mechanical gear, bearing and rotating machines by using features more from vibration signals and less from the acoustic signals. There has been an increasing demand for advanced AE analysis tools, which have the capacity to distinguish diferent sources of AE data. This has resulted in developing modern and more fex - ible patern recognition software, combining traditional, graphical AE analysis and advanced unsupervised patern recognition (UPR) and supervised patern recognition (SPR) analysis. Application of the UPR techniques on AE data during various test cases has also increased the understanding of the damage evolution and the capacity of noise discrimination [ 10]. The problem of a roller with health monitoring has illustrated the efectiveness of GA for fault classifcation by using ANNs [ 8 ]. In this regard, Al–Balushi and Samanta have suggested a procedure to diagnose the fault of gears by wavelet transformation and ANN for AE signals. These features were taken from wavelet transformation and were used as an input to an ANN based on diagnosing approach [ 11 ]. In the fault prognosis systems, the acoustic emission and vibration signal were utilised as an input signal. Additionally, ANN was utilised as a prog - nosis system for rotating machinery failure [12]. In this way, a multiple-layer neural network was successfully used to detect the fault in the gearbox, and classifcation was used to utilise the supervised learning with an experimentally obtained data. The data were presented as processed vibration and acoustic emission signals [ 13]. The utilisation of acoustic emission for early detection of the helicopter rotor head dynamic component faults was previously studied. They analysed the stress wave of the fight-test data set by using the wavelet-based techniques for assessing the background operational noise as compared to machinery failure results. The feed-forward neural network was used as a classifer to determine the correct fght regime [14 ]. For solving the issues of velocity and the time diferences, a new approach to AE source localization was described. This new approach to AE source location was documented on the wing spar cut-out of L-39 aircraft, as this method was used to estimate the AE source coordination by using the ANN process which extracted signal parameters [ 15 ]. Fog et al. studied the detection of the exhaust valve burn—through a four-cylinder, 500 mm bore and two-stroke marine diesel engine. This investigation comprised of monitoring three diferent valve conditions (normal, leak and large leak). Vibration and structure-born stress waves (AE) were monitored. The acoustic emission (AE) signal features were extracted by using principal component analysis (PCA). A feed-forward neural classifer was also used for discriminating between the three valve conditions [ 16]. The AE data collected during a static test of a 12-m FRP wind turbine blade was analysed and classifed by using diferent unsupervised patern recognition (UPR) techniques, and using Artificial Intelligence - Emerging Trends and Applications 278

the UPR results, a supervised patern recognition (SPR) method was trained based on the back-propagation neural network. This was applied to the AE data collection and a subse - quent biaxial fatigue loading of the same blade [17 ]. The neural network gained atention in grinding research due to its functions of learning, interpolation and patern recognition and classifcation. Diferent other examples of the appli - cation in the engineering feld were also reported [ 18 –22]. Aguiar et al. atempted to atain the classifcation of burn degrees of the surface-grinding machine, which was utilised for grind - ing tests with an aluminium oxide-grinding wheel and the utilisation of neural networks. The AE and power signal along with the statistics from the digital signal processing of these signals were used as inputs of the neural networks [ 9]. Furthermore, the ANN approach was proposed for the detection of work-piece “burn”, the unwanted change in metallurgical properties of the material produced by overly aggressive or otherwise inappropriate grinding [ 19 ]. The grinding AE signals for 52100 bearing steel were collected and digested to extract feature vectors. These appeared to be more useful for ANN processing. Aguiar et al.’s work was diferent as it used grinding parameters as an input to the neural networks that were not tested yet in surface roughness prediction by neural networks. In addition, a higher sampling rate data acquisition system was used to get the acoustic emission and cuting power [23 ]. Goebel and Wright developed hybrid architecture, featuring fuzzy logic and neural net - works to cope with weaknesses of traditional methods for monitoring and diagnosing an unatended milling machine. Force, spindle current and acoustic emission data were used as inputs to the neural network after they underwent some signal processing for calculating the membership functions of fuzzy relations. Additionally, fuzzy logic principles were uti - lised for diagnosing the system's status concerning tool wear and chater [24]. The fndings of it was encouraging to use neural network in detection and classifcation of work piece “burn” and surface roughness prediction revealed that AE signal from grinding machine [ 9, 19, 23 , 24 ]. Impact damage is a problem that damages the composite industry. This damage may seem superfcial, but it may often have negative efects on the performance of the composite struc - ture. The conventional NDE techniques can detect the locations or the shapes of the impact damage and cannot quantify its efects on the structure. Conversely, AE records the active faw growth when the structure gets loaded. It also measures the reduction in the structural performance produced by an impact load. AE signal analysis was used to measure the efect of impact damage on burst pressure in 5.75 inch diameter, inert propellant-flled and fla - ment-wound pressure vessels. The AE data were collected from 15 graphite/epoxy pressure vessels featuring 5 damage states and 3 resin systems. A burst pressure prediction model was developed by correlating the AE amplitude (frequency) distribution, generated during the frst pressure ramp, to 800 psig to known burst pressures using a four-layered back-propaga - tion neural network [25 ]. The ANN patern recognition technique was used for analysing the AE source signals of the pressure vessel in the site. For this purpose, a new quantitative analysis concept for AE Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 279

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version

Access to all documents
Unlimited textbook solutions
24/7 expert homework help

sources of pressure vessel was introduced by using artifcial neural network classifcation along with raising a new method to evaluate the severity of the AE sources [26 ]. Macías conducted an analysis of the relationship between AE signals and the main parameters of friction stir welding (FSW) process on the basis of ANN. The AE signals were acquired by data acquisition, applied in the welding process, carrying out plates 3 mm thick of aluminium alloy. Wavelet transform (WT) was also used for the statistical and temporal parameters of the decomposition of EA signals as input for the multilayer feed-forward ANN [27 ]. The partial discharge (PD) detection, signal analysis and patern identifcation, using AE mea - surements and the back-propagation (BP) ANN, were also studied. In this way, the measured signals were processed with three-dimensional paterns and short duration Fourier trans - forms (SDFT). The fndings showed that utilisation of BP ANN with the SDFT components for the classifcation of the diferent PD paterns provided excellent results [28 ]. To determine the quality of feature extraction and for the ANN classifer, performances were also conducted through a series of experimentations. This helped in input data acquisition during AE experiments on the chemical process plant. These input data consisted of a set of AE power spectra. Each source input data fle was subjected to preprocessing consisting of additional linear averaging in each input vector and individual amplitude normalisation by removing the mean value and division by the standard deviation of the feature. Three-layer networks using the back-propagation updating scheme were used for assessing their com - bined feature extraction and classifcation capabilities, while solving the problem of process stage recognition [29 ]. Until 2015, there is no study in the literature related to the estimation of oil flm thickness through acoustic emission signals, so to predict and monitor oil flm thickness of spur gear, a test rig was built and the gearbox was run at diferent speeds and load conditions. Artifcial neural network (ANN) and regression models used to predict the lubricant regime depended on oil temperature, acoustic emission signals and specifc flm thickness ( ? ). Both FFBP and Elman network models were used to predict specifc oil flm thickness with input as AE and temperature data. The results showed that FFBP and Elman models were efective in predict - ing oil flm thickness from acoustic emission signal and temperature, and this suggested tech - nique atained 99.9% success in prediction and classifcation at high speed during training. The FFBP was beter than Elman during testing and gave excellent results in prediction and classifcation. Thus, the architecture and topology of the network through specifc systems can be used for online monitoring of oil flm thickness and to predict any causes of failure of spur gear operation [ 30, 31]. 2.2. Spiking neural network Recently, spiking neural network (SNN) is the third-generation neural network ( Figure 2 ) and has gained a lot of interest in the scientifc community [32]. The SNNs became famous before the introduction of the sigmoidal or the perceptron neuron [32]. It was observed that the SNNs were very suitable for the parallel implementation in the digital hardware [32 ] and in the analogue hardware [ 33, 34 ]. Artificial Intelligence - Emerging Trends and Applications 280

The earlier generations of the neural networks used the analogue signals for conveying the data from one neuron to the next. This communication between the neurons in the SNNs used spikes, which was similar to the system used in the actual human neurons. The spikes could be recognized only at those instances when they had occurred. With the help of the weighted sum of the analogue input value, the earlier neuron estimated the value using the sum-specifc non-linear function. The value helped in determining the delay in the spike out - put, which was aimed for the succeeding neuron. Generally, the spiking neuron was viewed as the leaky integrator because the target neuron integrated the spikes for a period of time and accepted the resultant integrated values used as the membrane potential. When the mem- brane potential value approached a specifc threshold value, then, the neuron was seen to send a spike; thereafter, the membrane potential value was reset. An increased knowledge in the information processing of the biological neurons helped in explaining many additional parameters (like the gene and the protein expression) that needed to be taken into consideration for the neurons to spike [ 33 – 35]. The additional parameters included the diferent physical properties of the connections [32], the likelihood of the spikes being accepted at the synapse and the emited neurotransmiters or the open-ion channels [ 36, 37]. Several of the properties were modelled mathematically and were used for studying the biological neuronal system [ 38, 39 ]. The SNNs were made of the artifcial neurons that communicated using the trains that were considered as the pulse-coded data [40]. The SNN was biologically acceptable, and it was seen to ofer a means for the representation of the frequency, time, phase and such other features for the information processing. Moreover, the SNN possessed the ability for training the neurons for converting their spatial-temporal data to spikes (their properties include the spiking rates and spiking time). When one was select - ing the neuronal model for an SNN, one needed to consider the computational efcacy and the biological credibility [40]. If it was seen that the computational efcacy was beter than the biological plausibility, then the leaky integrate-and-fre (LIF) model needed to be adopted due to its cost efectiveness. Figure 2. Spiking neural network [32 ]. Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 281

In their study, Silva et al. [41 , 42 ] depicted the applications of the prototype decision support system for monitoring the tool wear depending on the SNN technique. This system consisted of six diferent components, that is, collection of data, feature extraction, multi-sensor inte - gration, patern recognition, tool wear estimation and the outlier detection. Their proposed architecture consisted of one built-in self-organizing neural architecture part that was based on the SNN. Their study showed that the modelling process was very efcient for classify - ing the tool wear level of the tool inserts with the help of the apparent weak features. Their method showed the efectiveness of using the SNN model for the tool condition monitoring, thus implying that the approach was feasible for many industrial applications, wherein a lot of noisy data are obtained. This researcher was the only one who used SNN in condition monitoring; the result showed the capability of spiking neuron networks for tool condition monitoring. 2.3. Genetic algorithm-based fault diagnosis GA created by John Holland in the 1970s is an evolutionary algorithm which is part of the feld of artifcial intelligence. A genetic algorithm (GA) is a method for solving both constrained and unconstrained optimization problems based on a natural selection process that mimics biological evolution. The algorithm repeatedly modifes a population of individual solutions. At each step, the genetic algorithm randomly selects individuals from the current population and uses them as parents to produce the children for the next generation. Over successive generations, the population “evolves” towards an optimal solution. As originally proposed, a simple GA mainly consists of three processes: selection, genetic operation and replacement. Description of a typical GA cycle and its high-level description are provided in Figure 3 . The population composed of a group of chromosomes, which were the candidates for the solution. The ftness values of all chromosomes were evaluated by an Figure 3. Genetic algorithm cycle. Artificial Intelligence - Emerging Trends and Applications 282

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version

Access to all documents
Unlimited textbook solutions
24/7 expert homework help

objective function (performance criteria or a system’s behaviour) in a decoded form (pheno - type). A particular group of parents was selected from the population for generating ofspring on the basis of the defned genetic operations of crossover and mutation. The ftness of all ofsprings was then evaluated using the same criterion. The chromosomes in the current population were then replaced by their ofspring on the basis of a certain replace - ment strategy. Such a GA cycle was repeated until the termination criterion was reached [ 8]. Using ANNs utilised a simple problem of a roller with health monitoring to illustrate the efectiveness of GA in AE feature selection for fault classifcation. It revealed that utilising GAs to select an optimal feature set for a classifcation application of ANNs was a very powerful technique [ 8 ]. Ming applies the AE technique for bearing condition monitoring and fault diag - nosis. Scales for continuous wavelet transform, wavelet-based waveform parameter selection and optimisation on the basis of genetic algorithm were the proposed selection methods [43 ]. The AE was monitored by utilising a data acquisition system during the process of conduct - ing the mechanical tests on several materials. Two of the sensors were positioned directly on the specimen. AE signals were thought to be patern vectors described by a number of writers. In this chapter, “model” data sets were generated to become closer to AE signals that were recorded during the tests. This chapter presented and validated a genetic algorithm- based approach to cluster the AE signals. Its superiority over the k-means algorithm was highlighted by the study of diferent “model” data sets. The genetic strategy can be character - ised by a high stability and a high performance especially to cluster data sets consisting of a minority class, a cluster with signals of extreme features or a set of clusters with very diferent sizes [44 ]. 2.4. Fuzzy logic-based fault diagnosis Zadeh introduced the fuzzy logic (FL) in 1965 [45–47]. FL is a multi-valued logic that allows the intermediate values between conventional evaluations like true/false, yes/no, high/low, and so on. The FL helps in providing a variety of ways to solve a control or classifcation problem. Thus, this method focuses on what the system should do rather than trying to model how it works [48 ]. Aguiar et al. work is mentioned twice in this chapter because it contains two parts: frst part used ANN for the classifcation of burn degrees of the surface grinding machine; in this part, a methodology was used to predict the surface roughness of advanced ceramics by using an adaptive neuro-fuzzy inference system (ANFIS). For this study, alumina work pieces were pressed and sintered into rectangular bars. The statistical data processed from the AE signal and the cuting power were also used as input data for ANFIS [ 9]. Cusido et al. provided approaches for a one-board fault detecting system and test program set (TPS) fault detecting system for electromechanical actuators (EMA) ball bearings by analysing the diferent vibra - tion and AE signals and by using FL inference techniques [49 ]. Omkar et al. presented the results of fuzzy modelling to discover the problem in grinding through digital processing of the acoustic emission signals produced during the process. Fuzzy C-means (FCM) clustering was utilised in classifcation of the AE signal to diferent Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 283

sources of signals. FCM was potentially helpful in discovering the cluster among the data, when the boundaries between the subgroups overlap. AE test was conducted by using pulse, pencil and spark signal source on the surface of solid steel block. Four parameters such as event duration, peak amplitude, rise time and ring down count were measured with the help of AET 5000 system. These data were then used in training and validation of the FCM-based classifcation [ 50]. Aguiar et al. investigated the burning in the grinding process on the basis of a fuzzy model. The inputs of the models were received from the digital processing of the raw AE and cuting power signals. The parameters obtained and used in this study consisted of the mean-value deviance, grinding power and root mean square (RMS) of the acoustic emission signal [ 51]. Ren et al. also atempted to introduce the most successful AE model during the continuous cuting periods by using fuzzy modelling. The fuzzy identifcation method provided a simple way to arrive at a more defnite conclusion on the basis of the information collected with the difculty in understanding the exact physics of the machining process [52 ]. Recent studies used type-2 fuzzy logic in their research [ 53 – 56] because of the need to have extremely fuzzy situations to use type-2 fuzzy. If we were extending the use of FL to a higher order, then it is called type-2 FL. Hence, Ren et al. explained how type-2 TSK [Takagi–Sugeno– Kang (TSK)] fuzzy uncertainty estimation method was implemented to flter the raw AE sig - nal directly from the AE sensor during turning process. This paper specifcally focuses on fltering and capturing the uncertainty by type-2 TSK fuzzy approach on the interval of AE signal during one 10 mm cuting length [ 53]. Ren et al. atempted to fnd out the relationship between AE and tool wear. They presented an application of type-2 FL on AE signal modelling in precision manufacturing. Type-2 fuzzy modelling was used for distinguishing the AE signal in precision machining. It provided a simple way for arriving at a defnite conclusion without understanding the exact physics of the machining process [54 ]. The knowledge about uncertainty prediction of tool life was highly essential for tool condition investigation. It was also important for taking decisions about how to maintain the machine quality. Ren et al. presented a type-2 fuzzy tool condition monitoring (TCM) system based on AE in micro-milling. In the system, type-2 FLSs were utilised for analysing the AE signal fea - ture (SF) and choosing the most reliable ones for integration to efectively estimate the cuting tool condition through its life. The acquired results show that the type-2 fuzzy tool life estima - tion is in accordance with the cuting tool wear state during the micro-milling process [ 55]. A type-2 fuzzy analysis method was utilised to analyse the AE SFs in TCM in micro-milling process. The interval output of type-2 approach provided an interval of uncertainty associ - ated with SFs of AE signal. The SFs with less RMSE and variation were selected to estimate the cuting tool life in the future [ 56 ]. The new philosophy for AE source localisation under high background noise was also designed. The algorithm was based on probabilistic and fuzzy- neuro principles, so AE events can be put to classifcation according to their energy and loca - tion probability. AE signals recorded during the stamping processes of a thin metal sheet were used for new algorithm testing [57 ]. Artificial Intelligence - Emerging Trends and Applications 284

Khalifa and Komarizadeh developed an efcient walnut recognition system through put - ting together the AE analysis, principle component analysis (PCA) and adaptive neuro-fuzzy inference system (ANFIS) classifer. This new system was tested later and classifed walnuts into two classes. In the classifcation phase, selected statistical features were used as the input for the ANFIS classifer [ 58]. 2.5. Support vector machine-based fault diagnosis The support vector machine (SVM) approach was utilised in the form of a classifcation tech - nique on the basis of the statistical learning theory (SLT). It was basically based on the principle of hyperplane classifer or linear separability. The main purpose of SVM was to explore a linear optimal hyperplane for maximizing the margin of separation between the two classes [ 59, 60]. The SVM was utilised for fault diagnosis of spur bevel gear box. This was considered to be a popular machine learning application due to its higher accuracy and for its generalization capabilities [ 61 ]. These studies also examined the fault diagnosis of low-speed bearings based on AE technique and vibration signal. Fault diagnosis was conducted by using the classifca - tion technique with the help of relevance vector machine (RVM) and SVM. The classifcation process provided a comparative study between RVM and SVM for fault diagnosis of low- speed bearing [62 , 63]. Yu and Zhou exposed the method to classify the AE signals in composite laminates by utilis - ing SVM. The classifer had built to achieve the identifcation and classifcation of AE signals. The results of simulation showed that SVM had the potential to efectively distinguish difer - ent acoustic emission signals and noise signals. The classifcation accuracy rate of grid search parameters was higher than the GA algorithm by this method [64]. Chu-Shu also revealed the method on how to classify the AE signals in composite laminates by using the SVM [ 65]. On the basis of a thorough review of literature, this study informs about the new approaches on the basis of hierarchical clustering and support vector machines (SVM) and are introduced to cluster AE signals and to detect P-waves for micro-crack location in the presence of noise through inducing the cracks in rock specimens during a surface instability test [ 66]. Thus, this chapter proposes a novel grinding wheel wear monitoring system based on discrete wavelet decomposition and SVM. The grinding signals were collected by an AE sensor [67 ]. Elforjani used a model to analyse the output signals of a machine while in operation and accordingly helps to set an early alarm tool that reduces the untimely replacement of com- ponents and the wasteful machine downtime. In this work, Elforjani uses three supervised machine learning techniques such as Gaussian process regression (GPR), support vector machine regression (SVMR) and multi-layer artifcial neural network (ANN) model to corre - late AE features with corresponding natural wear of slow-speed bearings throughout the series of laboratory experiments. Analysis of signal parameters such as root mean square (RMS) and signal intensity estimator (SIE) was done to discriminate the individual types of early damage. It was concluded that neural network models with back-propagation learning algorithm have an advantage over the other models in estimating the remaining useful life (RUL) for slow- speed bearings if the proper network structure is chosen and sufcient data are provided [ 68]. Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 285

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version

Access to all documents
Unlimited textbook solutions
24/7 expert homework help

The development of AI technique shows a promising potential in machine condition monitor - ing and diagnosis, although only few articles were found in this area. However, ANN based on AE has been successfully applied to many relevant problems. It can be considered that ANN is the most new popular method in condition monitoring with AE signal. The use of fuzzy, GA and SVM in condition monitoring and fault diagnosis based on AE signal analysis still needs additional atention because of the absence of available papers. Finally, the future works will be able to fnd a novel idea for machine condition monitoring and fault diagnosis using AE signal analysis and AI [ 69]. 3. Conclusion This chapter presents a survey based on a literature review using AE signal analysis and AI techniques in machine condition monitoring and fault diagnosis. It surveys the articles with a keyword index machine condition monitoring and machine fault diagnosis using AE signal analysis and AI. We can conclude that the classifcation of AE signals carries high importance in machine condition monitoring and fault diagnosis. AI has several advantages when compared to the traditional mathematical modelling and statistical analysis. This includes dispensing of the necessity for detailed system behaviour knowledge, which can be replaced by relatively sim - ple computational methods. ANN based on AE has been successfully applied to numerous relevant problems. Therefore, we can consider that ANN is the most new popular method in AE signal analysis. GA applications with AE signal analysis in machine condition monitoring and fault diagnosis still need more support and atention because of the lack of existing evidence. The experi - mental results prove that the use of fuzzy logic method is efcient and feasible. The eforts to fnd a novel idea must be encouraged to give more contributions in robust machine condition monitoring and fault diagnosis. Finally, the ability to continually change and obtain a novel idea for machine condition moni - toring and diagnosis using AE signal analysis and AI will be in future works. Acknowledgements The author would like to thank Northern Technical University in Iraq through Professor Dr Mowafaq Y. Hamdoon, the Chancellor of the university for supporting this work. Confict of interest The author declares that there is no confict of interest regarding the publication of this chapter. Artificial Intelligence - Emerging Trends and Applications 286

Author details Yasir Hassan Ali Address all correspondence to: yha2006@gmail.com Technical College Mosul, Northern Technical University, Mosul, Iraq References [1] Ali YH, Rahman RA, Hamzah RIR. Acoustic emission signal analysis and artifcial intel - ligence techniques in machine condition monitoring and fault diagnosis: A review. Journal Teknologi. 2014; 69 (2) [2] Ali YH et al. Acoustic emission technique in condition monitoring and fault diagnosis of gears and bearings. International Journal of Academic Research. 2014; 6 (5) [3] Mba D, Rao RB. Development of Acoustic Emission Technology for Condition Monitoring and Diagnosis of Rotating Machines; Bearings, Pumps, Gearboxes, Engines and Rotating Structures. 2006 [4] Filippeti F, Franceschini G, Tassoni C. A survey of AI techniques approach for induc - tion machine on-line diagnosis. Proceedings of Power Electronics and Motion Control PEMC. 1996; 2 :314-318 [5] Siddique A, Yadava G, Singh B. 2003. Applications of artifcial intelligence techniques for induction machine stator fault diagnostics: Review. Diagnostics for Electric Machines, Power Electronics and Drives. 2003. SDEMPED 2003. 4th IEEE International Symposium on: 29-34 [6] Kok JN, Boers EJ, Kosters WA, van der Puten P, Poel M. Artifcial intelligence: Defnition, trends, techniques, and cases. Artifcial Intelligence. 2009 [7] Pham D, Pham P. Artifcial intelligence in engineering. International Journal of Machine Tools and Manufacture. 1999; 39 (6):937-949 [8] Saxena A, Saad A. Genetic algorithms for artifcial neural net-based condition monitoring system design for rotating mechanical systems. Applied Soft Computing Technologies: The Challenge of Complexity. Springer. 2006. pp. 135-149 [9] Aguiar PR, Martins CH, Marchi M, Bianchi EC. Digital Signal Processing for Acoustic Emission; 2012 [10] Kouroussis D, Anastassopoulos A, Lenain J, Proust A. Advances in Classifcation of Acoustic Emission Sources. Reims: Les Journées COFREND; 2001 [11] Al-Balushi K, Samanta B. Gear fault diagnostics using wavelets and artifcial neural network. COMADEM 2000. 13th International Congress on Condition Monitoring and Diagnostic Engineering Management. 1001-1010. 2000 Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 287

[12] Mahamad AKB. Diagnosis, Classifcation and Prognosis of Rotating Machine using Artifcial Intelligence. Kumamoto University; 2010 [13] Abu-Mahfouz I. Condition monitoring of a gear box using vibration and acoustic emis - sion based artifcial neural network. SAE Transactions. 2001; 110 (6):1771-1781 [14] Menon S, Schoess JN, Hamza R, Busch D. Wavelet-based acoustic emission detection method with adaptive thresholding. SPIE's 7th Annual International Symposium on Smart Structures and Materials. 2000. pp. 71-77 [15] Blahacek M, Chlada M, Prevorovský Z. Acoustic emission source location based on sig - nal features. Advanced Materials Research. 2006; 13 :77-82 [16] Fog TL, Brown E, Hansen H, Madsen L, Sørensen P, Hansen E, Steel J, Reuben R, Pedersen P. Exhaust Valve leakage Detection in Large Marine Diesel Engines. COMADEM´ 98, 11th Int. Conf. on Condition Monitoring and Diagnostic Engineering Management. pp. 269-279 [17] Kouroussis D, Anastassopoulos A, Vionis P, Kolovos V. Unsupervised Patern recog - nition of acoustic emission from full scale testing of a wind turbine blade. Journal of Acoustic Emission (USA). 2000; 18 :217 [18] Wang J-Z, Wang L-S, Li G-f, Zhou G-H. Prediction of surface roughness in cylindrical traverse grinding based on ALS algorithm. Machine Learning and Cybernetics, 2005. Proceedings of 2005 International Conference on, 1. 2005: 549-554 [19] Wang Z, Willet P, DeAguiar PR, Webster J. Neural network detection of grinding burn from acoustic emission. International Journal of Machine Tools and Manufacture. 2001; 41 (2):283-309 [20] Doto FR, Aguiar PR d, Bianchi EC, Serni PJ, Thomazella R. Automatic system for ther - mal damage detection in manufacturing process with internet monitoring. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2006; 28 (2):153-160 [21] Kwak J-S, Ha M-K. Neural network approach for diagnosis of grinding operation by acoustic emission and power signals. Journal of Materials Processing Technology. 2004; 147 (1):65-71 [22] Aguiar P, França T, Bianchi E. Roughness and roundness prediction in grinding. Proceedings of the 5th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME 06). 2006. pp. 25-28 [23] Aguiar PR, Cruz CE, Paula WC, Bianchi EC. Predicting Surface Roughness in Grinding using Neural Networks [24] Goebel K, Wright PK. Monitoring and Diagnosing Manufacturing Processes Using a Hybrid Architecture with Neural Networks and Fuzzy Logic. EUFIT, Proceedings. 1993. 2 [25] Walker JL, Russell SS, Workman GL, Hill EV. Neural network/acoustic emission burst pressure prediction for impact damaged composite pressure vessels. Materials Evaluation. 1997; 55 (8):903-907 Artificial Intelligence - Emerging Trends and Applications 288

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version

Access to all documents
Unlimited textbook solutions
24/7 expert homework help

[26] Shen G, Duan Q, Zhou Y, Li B, Liu Q, Li C, Jiang S. Investigation of artifcial neural network patern recognition of acoustic emission signals for pressure vessels. NDT. 2001; 23 :144-146 [27] Macías EJ, Roca AS, Fals HC, Fernández JB, Muro JC. Neural networks and acoustic emission for modelling and characterization of the friction stir welding process. Revista Iberoamericana de Automática e Informática Industrial RIAI. 2013; 10 (4):434-440 [28] Tian Y, Lewin P, Davies A, Suton S, Swingler S. Application of acoustic emission techniques and artifcial neural networks to partial discharge classifcation. Electrical Insulation, 2002. Conference Record of the 2002 IEEE International Symposium on: 119-123. 2002 [29] Szyszko S, Payne P. Artifcial neural networks for feature extraction from acoustic emis - sion signals. Measurements, Modelling and Imaging for Non-Destructive Testing, IEE Colloquium on. 1991:6/1-6/6 [30] Ali YH, Abd Rahman R, Hamzah RIR. Artifcial neural network model for monitoring oil flm regime in spur gear based on acoustic emission data. Shock and Vibration. 2015; 2015 [31] Ali YH, Rahman RA, Hamzah RIR. Regression modeling for spur gear condition moni - toring through oil flm thickness based on acoustic emission signal. Modern Applied Science. 2015; 9 (8):21 [32] Ahmed FY, Yusob B, Hamed HNA. Computing with spiking neuron networks a review. International Journal of Advances in Soft Computing & Its Applications. 2014:6(1) [33] Kasabov N. To spike or not to spike: A probabilistic spiking neuron model. Neural Networks. 2010; 23 (1):16-19 [34] Kasabov N. Integrative connectionist learning systems inspired by nature: current mod - els, future trends and challenges. Natural Computing. 2009; 8 (2):199-218 [35] Kojima, H. and S. Katsumata. An analysis of synaptic transmission and its plastic - ity by glutamate receptor channel kinetics models and 2-photon laser photolysis. In: International Conference on Neural Information Processing. 2008. Springer [36] Ikegaya Y et al. Statistical signifcance of precisely repeated intracellular synaptic pat - terns. PloS One. 2008; 3 (12):e3983 [37] Ahmed FY, Shamsuddin SM, Hashim SZM. Improved SpikeProp for using particle swarm optimization. Mathematical Problems in Engineering. 2013; 2013 [38] Izhikevich E.. Dynamical Systems in Neuroscience: The Geometry of Excitability and Bursting (Computational Neuroscience): The MIT Press. 2006 [39] Izhikevich EM, Edelman GM. Large-scale model of mammalian thalamocortical sys - tems. Proceedings of the National Academy of Sciences. 2008; 105 (9):3593-3598 [40] Kasabov, N. Evolving spiking neural networks and neurogenetic systems for spatio-and spectro-temporal data modelling and patern recognition. In: IEEE World Congress on Computational Intelligence. 2012. Springer Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 289

[41] Silva RG. Condition monitoring of the cuting process using a self-organizing spiking neural network map. Journal of Intelligent Manufacturing. 2010; 21 (6):823-829 [42] Silva RG, Wilcox S, Araújo AA. Multi-sensor condition monitoring using spiking neuron networks. In: IADIS international conference applied computing 2007. 2007 [43] Ming ZX. Application of Acoustic Emission Technique in Fault Diagnostics of Rolling Bearing. Master's thesis. Tsinghua University, Beijing, Haidian; 2006 [44] Sibil A, Godin N, R’Mili M, Maillet E, Fantozzi G. Optimization of acoustic emission data clustering by a genetic algorithm method. Journal of Nondestructive Evaluation. 2012; 31 (2):169-180 [45] Zadeh LA. Fuzzy sets. Information and Control. 1965; 8 (3):338-353 [46] Zadeh LA. Outline of a new approach to the analysis of complex systems and decision processes. IEEE Transactions on Systems, Man and Cybernetics. 1973;(1):28-44 [47] Zadeh LA. Fuzzy algorithms. Information and Control. 1968; 12 (2):94-102 [48] Hellmann M. Fuzzy Logic Introduction” a Laboratoire Antennes Radar Telecom. FRE CNRS. 2272 [49] Cusido J, Delgado M, Navarro L, Sala V, Romeral L. EMA fault detection using fuzzy inference tools. AUTOTESTCON, 2010 IEEE. 2010: 1-6 [50] Omkar S, Suresh S, Raghavendra T, Mani V. Acoustic emission signal classifcation using fuzzy C-means clustering. Neural Information Processing, 2002. ICONIP'02. Proceedings of the 9th International Conference on, 4. 2002:1827-1831 [51] De Aguiar PR, Bianchi EC, Canarim RC. Monitoring of Grinding Burn by Acoustic Emission [52] Ren Q, Baron L, Balazinski M. Fuzzy identifcation of cuting acoustic emission with extended subtractive cluster analysis. Nonlinear Dynamics. 2012; 67 (4):2599-2608 [53] Ren Q, Baron L, Balazinski M. Application of type-2 fuzzy estimation on uncertainty in machining: An approach on acoustic emission during turning process. Fuzzy Information Processing Society, 2009. NAFIPS 2009. Annual Meeting of the North American. 2009: 1-6 [54] Ren Q, Baron L, Balazinski M. Type-2 fuzzy modeling for acoustic emission signal in precision manufacturing. Modelling and Simulation in Engineering. 2011; 2011 :17 [55] Ren Q, Balazinski M, Baron L, Jemielniak K, Botez R, Achiche S. Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences. 2014; 255 :121-134 [56] Ren Q, Baron L, Balazinski M, Jemielniak K. Acoustic emission signal feature analysis using type-2 fuzzy logic system. Fuzzy Information Processing Society (NAFIPS), 2010 Annual Meeting of the North American. 2010: 1-6 [57] Blahacek M, Prevorovsky Z, Krofta J, Chlada M. Neural network localization of noisy AE events in dispersive media. Journal of Acoustic Emission(USA). 2000; 18 :279 Artificial Intelligence - Emerging Trends and Applications 290

[58] Khalifa S, Komarizadeh MH. An intelligent approach based on adaptive neuro-fuzzy inference systems (ANFIS) for walnut sorting. Australian Journal of Crop Science. 2012; 6 (2) [59] Vapnik V. Statistical Learning Theory New York. NY: Wiley; 1998 [60] Burges CJ. A tutorial on support vector machines for patern recognition. Data Mining and Knowledge Discovery. 1998; 2 (2):121-167 [61] Saravanan N, Kumar Siddabatuni V, Ramachandran K. A comparative study on classif - cation of features by SVM and PSVM extracted using Morlet wavelet for fault diagnosis of spur bevel gear box. Expert Systems with Applications. 2008; 35 (3):1351-1366 [62] Widodo A, Yang B-S, Kim EY, Tan AC, Mathew J. Fault diagnosis of low speed bear - ing based on acoustic emission signal and multi-class relevance vector machine. Nondestructive Testing and Evaluation. 2009; 24 (4):313-328 [63] Widodo A, Kim EY, Son J-D, Yang B-S, Tan AC, Gu D-S, Choi B-K, Mathew J. Fault diagnosis of low speed bearing based on relevance vector machine and support vector machine. Expert Systems with Applications. 2009; 36 (3):7252-7261 [64] Yu Y, Zhou L. Acoustic emission signal classifcation based on support vector machine. TELKOMNIKA Indonesian Journal of Electrical Engineering. 2012; 10 (5):1027-1032 [65] Chu-Shu K. A machine learning approach for locating acoustic emission. EURASIP Journal on Advances in Signal Processing. 2010; 2010 [66] Yang Z, Yu Z. Grinding wheel wear monitoring based on wavelet analysis and sup - port vector machine. The International Journal of Advanced Manufacturing Technology. 2012; 62 (1-4):107-121 [67] Yu Y, Zhou L. Acoustic emission signal classifcation based on support vector machine. Computer Engineering and Technology (ICCET), 2010 2nd International Conference, 16-18 April Chengdu. 2010; 6 :300-304 [68] Elforjani M, Shanbr S. Prognosis of bearing acoustic emission signals using supervised machine learning. IEEE Transactions on Industrial Electronics. 2017 [69] Ali YH, Ali SM, Rahman RA, Hamzah RIR. Acoustic Emission and Artifcial Intelligent Methods in Condition Monitoring of Rotating Machine–A Review. National Conference for Postgraduate Research 2016, Universiti Malaysia Pahang. Malaysia. 2016 Artificial Intelligence Application in Machine Condition Monitoring and Fault Diagnosis http://dx.doi.org/10.5772/intechopen.74932 291

Your preview ends here

Eager to read complete document? Join bartleby learn and gain access to the full version