The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

Assignment 10, Question 4, Problem Book #202 Problem Statement An ideal Brayton cycle with a two-stage compressor, a two-stage turbine, and a regenerator operates with a mass flow rate of 25 kg/s. The regenerator cold inlet is at 490 K and its effectiveness is 60%. Ambient conditions are 90 kPa and 20°C. The intercooler operates at 450 kPa and the reheater operates at 550 kPa. The temperature at the exit of the combustion chamber is 1,400 K. Heat is removed in the intercooler at a rate of 2.5 MW and heat is added in the reheater at a rate of 10 MW. Determine the thermal efficiency and the back work ratio. Use a cold air standard analysis with cp = 1.005 kJ/(kg K) and k = 1.4. . Answer Table Stage Description Your Answer Correct Answer Due Date Grade (%) 1 Thermal efficiency (%) Dec 5, 2024 11:59 pm 0.0 1 Weight Attempt Action/Message 1/5 Part Type Submit 1 Back work ratio (%) Dec 5, 2024 11:59 pm 0.0 1 * Correct answers will only show after due date has passed.

Assignment 10, Question 3, Problem Book #198 Problem Statement Consider a Brayton cycle with a regenerator. The regenerator has an effectiveness of 75%. The compressor inlet conditions are 1.2 bar and 300 K and the mass flowrate is 4.5 kg/s. The compressor outlet pressure is 9 bar. Both the compressor and turbine consist of a single isentropic stage. What minimum power output must be achieved before the regenerator begins to have a benefit? Use an air-standard analysis. Answer Table Correct Answer Stage Description Your Answer Due Date Grade (%) Part Weight Attempt Action/Message Туре 1 Power output (MW) Dec 5, 2024 11:59 pm 0.0 1 1/5 Submit * Correct answers will only show after due date has passed.

Q-3 Consider an engine operating on the ideal Diesel cycle with air as the working fluid. The volume of the cylinder is 1200 cm³ at the beginning of the Compression process, 75 cm³ at the end, and 150 cm³ after the heat addition process. Air is at 17°c and lookpa at the beginning of the compression proc ess. Determine @ The pressure at the beginning of the heat rejection process. the net work per cycle in kjⒸthe mean effective pressur. Answers @264.3 KN/m² ②0.784 kj or 544-6 kj © 697 KN 19 2 m

Answer 2

Question

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Question

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Question

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Answer 6

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C

Thus, the temperature at the inlet of the low-pressure turbine is 481.1°C.

Calculate the thermal efficiency of the cycle (ηth).

ηth=1−qoutqin=1−h6−h1(h3−h2)+(h5−h4)

=1−2514.6 kJ/kg−151.42 kJ/kg(3006.9 kJ/kg−256.49 kJ/kg)+(3436.0 kJ/kg−2704.3 kJ/kg)=1−2263.2 kJ/kg3482.0 kJ/kg=0.35=35%

Thus, the thermal efficiency of the cycle is 35%.

Answer 7

Chapter 9, Problem 128P

To determine

The temperature at the inlet of each turbine and the thermal efficiency of the cycle.

Answer 8

Expert Solution & Answer

Explanation of Solution

Given:

Pressure of steam at the condenser (P1) is 20 kPa.

Pressure of steam at the boiler (P3) is 5000 kPa.

Pressure of steam at the reheat section (P4) is 1200 kPa.

Temperature of water at the turbine inlet (T3) is 450°C.

Quality of steam at the exit of the turbines (x) is 0.96.

Calculation:

Draw the T−s diagram of the cycle as in Figure (1).

Fundamentals Of Thermal-fluid Sciences In Si Units, Chapter 9, Problem 128P

The pressures are constant for the process 4 to 5 and process 6 to 1.

P4=P5P6=P1

The entropies are constant for the process 3 to 4 and process 5 to 6.

s3=s4s5=s6

Refer Table A-5, “Saturated water-Pressure table”, obtain the enthalpy and specific volume at state 1 corresponding to the pressure of 20 kPa.

h1=hf@20 kPa=251.42 kJ/kgv1=vf@20 kPa=0.0010172 m3/kg

Calculate the work done by the pump during process 1-2(wp,in).

wp,in=v1(P2−P1)=(0.0010172 m3/kg)(5000 kPa−20 kPa)=(0.0010172 m3/kg)(5000 kPa−20 kPa)(1 kJ1 kPa⋅m3)=5.065 kJ/kg

Calculate the enthalpy at state 2(h2).

h2=h1+wp,in=251.42 kJ/kg+5.065 kJ/kg=256.49 kJ/kg

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 1200 kPa and quality of 0.96.

hf=798.33 kJ/kghfg=1985.4 kJ/kgsf=2.2159 kJ/kg⋅Ksfg=4.3058 kJ/kg⋅K

Calculate the enthalpy at state 4(h4).

h4=hf+x4hfg=798.33 kJ/kg+(0.96)(1985.4 kJ/kg)=2704.3 kJ/kg

Calculate the entropy at state 4(s4).

s4=sf+x4sfg=2.2159 kJ/kg⋅K+(0.96)(4.3058 kJ/kg⋅K)=6.3495 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 5000 kPa and entropy of 6.3495 kJ/kg⋅K.

h3=3006.9 kJ/kgT3=327.2°C

Thus, the temperature at the inlet of the high-pressure turbine is 327.2°C.

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties corresponding to the pressure of 20 kPa and quality of 0.96.

hf=251.42 kJ/kghfg=2357.5 kJ/kgsf=0.8320 kJ/kg⋅Ksfg=7.0752 kJ/kg⋅K

Calculate the enthalpy at state 6(h6).

h6=hf+x6hfg=251.42 kJ/kg+(0.96)(2357.5 kJ/kg)=2514.6 kJ/kg

Calculate the entropy at state 6(s6).

s6=sf+x6sfg=0.8320 kJ/kg⋅K+(0.96)(7.0752 kJ/kg⋅K)=7.6242 kJ/kg⋅K

Refer Table A-6, “Superheated water”, obtain the enthalpy and temperature at state 3 corresponding to the pressure of 1200 kPa and entropy of 7.6242 kJ/kg⋅K.

h5=3436.0 kJ/kgT5=481.1°C