Data movement instructions: The different instructions are been grouped as “instruction classes”. The instructions in a class performs same operation but with different sizes of operand. The “Mov” class denotes data movement instructions that copy data from a source location to a destination. The class has 4 instructions that includes: movb: It copies data from a source location to a destination. It denotes an instruction that operates on 1 byte data size. movw: It copies data from a source location to a destination. It denotes an instruction that operates on 2 bytes data size. movl: It copies data from a source location to a destination. It denotes an instruction that operates on 4 bytes data size. movq: It copies data from a source location to a destination. It denotes an instruction that operates on 8 bytes data size. Unary and Binary Operations: The details of unary operations includes: The single operand functions as both source as well as destination. It can either be a memory location or a register. The instruction “incq” causes 8 byte element on stack top to be incremented. The instruction “decq” causes 8 byte element on stack top to be decremented. The details of binary operations includes: The first operand denotes the source. The second operand works as both source as well as destination. The first operand can either be an immediate value, memory location or register. The second operand can either be a register or a memory location. Jump Instruction: The “jump” instruction causes execution to switch to an entirely new position in program. The “label” indicates jump destinations in assembly code. The “je” instruction denotes “jump if equal” or “jump if zero”. The comparison operation is performed. If result of comparison is either equal or zero, then jump operation takes place. The “ja” instruction denotes “jump if above”. The comparison operation is performed. If result of comparison is greater, then jump operation takes place. The “pop” instruction resumes execution of jump instruction. The “jmpq” instruction jumps to given address. It denotes a direct jump.

Question

Want to see the full answer?

Answer 1

Question

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Students have asked these similar questions

Given the following addresses, which two addresses conflict in the cache: The numb of locations in the cache is 2048, the cahche is indexed by address bits 15 to 5 and the tag bits are from 31 to 16. (a) 0x0000 0100 (b) 0x0000 1400 (c) 0x0010 0100 (d) 0x0100 0140

5. RetailItem ClassWrite a class named RetailItem that holds data about an item in a retail store. The class should store the following data in attributes: item description, units in inventory, and price. Once you have written the class, write a program that creates three RetailItem objects and stores the following data in them: Description Units in Inventory PriceItem #1 Jacket 12 59.95Item #2 Designer Jeans 40 34.95Item #3 Shirt 20 24.95

Write a class named Patient that has attributes for the following data: First name, middle name, and last name Address, city, state, and ZIP code Phone number Name and phone number of emergency contact The Patient class’s _ _init_ _ method should accept an argument for each attribute. The Patient class should also have accessor and mutator methods for each attribute. Next, write a class named Procedure that represents a medical procedure that has been performed on a patient. The Procedure class should have attributes for the following data: Name of the procedure Date of the procedure Name of the practitioner who performed the procedure Charges for the procedure The Procedure class’s _ _init_ _ method should accept an argument for each attribute. The Procedure class should also have accessor and mutator methods for each attribute. Next, write a program that creates an instance of the Patient class, initialized with sample data. Then, create three instances of the Procedure class,…

Answer 2

Question

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 3

Question

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 4

Question

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 5

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 6

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 7

Chapter 4.1, Problem 4.2PP

A.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 8

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 9

B.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 10

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 11

C.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 12

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 13

D.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 14

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 15

E.

Program Plan Intro

Data movement instructions:

The different instructions are been grouped as “instruction classes”.

The instructions in a class performs same operation but with different sizes of operand.

The “Mov” class denotes data movement instructions that copy data from a source location to a destination.

The class has 4 instructions that includes:

movb:

It copies data from a source location to a destination.

It denotes an instruction that operates on 1 byte data size.

movw:

It copies data from a source location to a destination.

It denotes an instruction that operates on 2 bytes data size.

movl:

It copies data from a source location to a destination.

It denotes an instruction that operates on 4 bytes data size.

movq:

It copies data from a source location to a destination.

It denotes an instruction that operates on 8 bytes data size.

Unary and Binary Operations:

The details of unary operations includes:

The single operand functions as both source as well as destination.

It can either be a memory location or a register.

The instruction “incq” causes 8 byte element on stack top to be incremented.

The instruction “decq” causes 8 byte element on stack top to be decremented.

The details of binary operations includes:

The first operand denotes the source.

The second operand works as both source as well as destination.

The first operand can either be an immediate value, memory location or register.

The second operand can either be a register or a memory location.

Jump Instruction:

The “jump” instruction causes execution to switch to an entirely new position in program.

The “label” indicates jump destinations in assembly code.

The “je” instruction denotes “jump if equal” or “jump if zero”.

The comparison operation is performed.

If result of comparison is either equal or zero, then jump operation takes place.

The “ja” instruction denotes “jump if above”.

The comparison operation is performed.

If result of comparison is greater, then jump operation takes place.

The “pop” instruction resumes execution of jump instruction.

The “jmpq” instruction jumps to given address. It denotes a direct jump.

Answer 16

Expert Solution & Answer

Answer 17

Expert Solution & Answer

Answer 18

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 19

Ch. 4.1 - Prob. 4.1PP Ch. 4.1 - Prob. 4.2PP Ch. 4.1 - Prob. 4.3PP Ch. 4.1 - Prob. 4.4PP Ch. 4.1 - Prob. 4.5PP Ch. 4.1 - Prob. 4.6PP Ch. 4.1 - Prob. 4.7PP Ch. 4.1 - Prob. 4.8PP Ch. 4.2 - Practice Problem 4.9 (solution page 484) Write an...Ch. 4.2 - Prob. 4.10PP

Solution Summary: The author explains the different instructions in a class that perform the same operation but with different sizes of operands.

Want to see the full answer?

Chapter 4 Solutions