Chapter 14, Problem 60P

A self-priming centrifugal pump is used to pump water at 25°c from a reservoir whose surface is 2.2 m below the centerline of the pump inlet (Fig. P14-60). The pipe is PVC pipe with an ID of 24.0 mm and negligible average inner roughness height. The pipe length from the submerged pipe inlet to the pump inlet is 2.8 m. There are only two minor losses in the piping system from the pipe inlet to the pump inlet: a sharp-edged reentrant inlet (K_L = 0.85), and a flanged smooth 900 regular elbow (KL = 0.3). The pump's required net positive suction head is provided by the manufacturer as a curve fit: $NPS{H}_{required}=2.2m+\left[0.0013m/{\left(Lpm\right)}^2{\stackrel{\dot{}}{V}}^2\right]$ , where volume flow rate is in Lpm. Estimate the maximum volume flow rate (in units of Lpm) that can be pumped without cavitation.