You are working in your dream job: an assistant for the special effects department of a movie studio. You have just been given this assignment: the star of a horror movie is walking down a spooky hallway when suddenly, due to some unknown and strange supernatural forces, all the pictures hanging on the wall start rotating about their upper edges until they are sticking straight out from the wall! To set up this effect, you attach the pictures to the wall with hinges along their upper end and wrap 20 turns of wire around the outside frame of the picture, as shown in figure (a). Hinge Turns of wire Picture. frame a B Wall I Y_L__I B You set up a uniform magnetic field in the hallway that is directed upward and oriented at an angle of y = 5.00° to the vertical, with its horizontal component directed perpendicularly into the wall. When you send a current of I = 10.3 A through the wire around each picture, the frame swings up perpendicular to the wall as shown in figure (b). Consider a particular picture of width w = 39.0 cm, height h = 45.0 cm, and mass m = 0.950 kg. (a) Your supervisor asks you to determine the magnetic field magnitude (in T) that is necessary for this picture to rotate so that its face is parallel to the floor and perpendicular to the wall, as in figure (b). T (b) She also asks about any dangers associated with this magnetic field. (Select all that apply.) There is no danger associated with this magnetic field. O Such a strong magnetic field may cause metal objects to become projectiles. Such a strong magnetic field may cause human tissues to become dangerously magnetized.

You are working in your dream job: an assistant for the special effects department of a movie studio. You have just been given this assignment: the star of a horror movie is walking down a spooky hallway when suddenly, due to some unknown and strange supernatural forces, all the pictures hanging on the wall start rotating about their upper edges until they are sticking straight out from the wall! To set up this effect, you attach the pictures to the wall with hinges along their upper end and wrap 20 turns of wire around the outside frame of the picture, as shown in figure (a). Hinge Turns of wire Picture. frame a B Wall I Y_L__I B You set up a uniform magnetic field in the hallway that is directed upward and oriented at an angle of y = 5.00° to the vertical, with its horizontal component directed perpendicularly into the wall. When you send a current of I = 10.3 A through the wire around each picture, the frame swings up perpendicular to the wall as shown in figure (b). Consider a particular picture of width w = 39.0 cm, height h = 45.0 cm, and mass m = 0.950 kg. (a) Your supervisor asks you to determine the magnetic field magnitude (in T) that is necessary for this picture to rotate so that its face is parallel to the floor and perpendicular to the wall, as in figure (b). T (b) She also asks about any dangers associated with this magnetic field. (Select all that apply.) There is no danger associated with this magnetic field. O Such a strong magnetic field may cause metal objects to become projectiles. Such a strong magnetic field may cause human tissues to become dangerously magnetized.

Similar questions

Suppose Google wants to launch a surveillance satellite to invade the privacy of all their users. They need it to revolve around Earth 10.0 times a day for maximum invasive efficiency. a) Draw a free-body diagram b) What should the radius of its orbit be if we neglect the presence of the Moon? c) How fast is it traveling? G = 6.67 * 10 ^-11 N*m^2/kg^2 M earth = 5.97 * 10^24 kg
You are moving at a speed 2/3 c toward Randy when shines a light toward you. At what speed do you see the light approaching you? a 1/3 c b 2/3 c c 4/3 c d c
*** 10. In very-long-baseline interferometry (VLBI) tracking of interplanetary spacecraft, a 8.4-GHz radio signal is sent from a spacecraft toward the earth. In order to determine the angular position of the spacecraft, the signal is received simultaneously at two Deep Space Network (DSN) stations and the phase of the received signal at each station is measured rela- tive to a stable clock. The distance between the antenna in Australia and the one in California is 10,588,966.336 m. To spacecraft 10,588,966.336 m Australia California a) What is the wavelength of the X-band radio signal? b) If the phase of the signal in the Australia antenna is found to be 10,458.6 cycles ahead of the signal in the California antenna, what must be the angle between the direction to the spacecraft and the normal to the baseline (the dashed line in the figure above)? [Check: The answer here is 0.002°.]
Question 7 of 15 A light ray refracts at the interface between two transparent materials as shown below. In material 1 the light ray is traveling at v₁ = 2.5 x 108 m/s and in material 2 it is traveling at a speed v2. What is v2? Material 1 Material 2 60° 30°
could you help me with this one?
Answer each of the following relative to the center of the wheel, 10cm T1 unit v clockwise %3D T2 unit v none T3 unit v counter-clockwisv F3 = 2N T4 unit v counter-clockwisv %3D Tnet = unit v counter-clockwisv F4 = 9N F = 9N F2 = 2N cannot be determined check answers nal review, torque ientific Online Calculator 9.81m/s, vound = 343m/s
For an independent study project, you design an experiment to measure the speed of light. You propose to bounce laser light off a mirror that is 54.5 km due east and have it detected by a light sensor that is 115 m due south of the laser. The first problem is to orient the mirror so that the laser light reflects off the mirror and into the light sensor. (a) Determine the angle that the normal to the mirror should make with respect to due west. °(b) Since you can read your protractor only so accurately, the mirror is slightly misaligned and the actual angle between the normal to the mirror and due west exceeds the desired amount by 0.003°. Determine how far south you need to move the light sensor in order to detect the reflected laser light. m
A family brought their grandfather clock from Denver, Colorado to Clarksville, TN when they moved. Shortly afterwards, they discovered that the clock no longer ran accurately due to a change in the local g value. Do you expect the clock runs faster or slower? How do you fix the problem, moving the oscillating piece up or down? The clock runs faster. Moving the oscillating mass up slightly so the rod is shorter. Moving the oscillating mass down the rod slightly so the rod is longer. The clock runs slower. 1. Yes. 2. No.
A spherical star with radius 6.96 x 105 km and rotating with angular speed 3.92 x 10-5 rad/s collapses into a spherical neutron star without loss of mass. The neutron star emits a beam of X-rays directed radially outward that can be seen by an observatory on the earth at a distance 5.28 x 1014 km from the star. The X-ray beam sweeps past the earth with a tangential speed 7.16 x 1015 km/s each time the neutron star makes a full rotation. During the collapse, angular momentum was conserved. The radius of the neutron star is
ܩܘ 3 8:27 × Course Home openvellum.ecollege.com EPHY 112: General Ph... Course Home Part A You may want to review (Page). For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of The speed of light in vacuum. t Express your answer in seconds to three significant figures. || = How much time does it take light to travel from the moon to the earth, a distance of 384000 km ? Submit Part B ? P Pearson Copyright © 2023 Pearson Education Inc. All rights reserved. Terms of Use | Privacy Policy | Permissions | Contact Us | ? ?