V. A simply supported reinforced concrete beam subjected the maximum shear forceV=150KN. the section of the beam is rectangular with b×h=250mmx500mm.theconcrete is of grade C30 (f=1.43N/mm², f=14.3 N/mm²) . The transverse stirrup isof HPB235 (f, = 210N/ mm? ) . It is required to design the web reinforcements ofthe beam only with stirrups.( 10mm, Ag = 78.5mm² ) a, = 35mm.nA SV1. NoB. = 1.0, V = a f,bh, + fy ·Data: C30 concrete (f=1.43N/mm², fe=14.3 N/mm²)HRB335 steel (f, = 300N / mm² )HPB235 steel ( f, = 210N/ mm² )ho=465

Answered: Image /qna-images/answer/d62587eb-8a54-4b0b-93cb-521cf4efbce6.jpg

V. A simply supported reinforced concrete beam subjected the maximum shear force V=150KN. the section of the beam is rectangular with b×h=250mm×500mm.the concrete is of grade C30 (f=1.43N/mm², f=14.3 N/mm²) . The transverse stirrup is of HPB235 (f, = 210N / mm² ) .It is required to design the web reinforcements of the beam only with stirrups.( 10mm, Ag = 78.5mm²)a̟ = 35mm. nA SVI. No B. =1.0, V = a„f,bh, + fv° Data: C30 concrete (f=1.43N/mm², fc=14.3 N/mm²) HRB335 steel (f, = 300N / mm²) HPB235 steel (f, = 210N/mm² ) ho=465

V. A simply supported reinforced concrete beam subjected the maximum shear force V=150KN. the section of the beam is rectangular with b×h=250mm×500mm.the concrete is of grade C30 (f=1.43N/mm², f=14.3 N/mm²) . The transverse stirrup is of HPB235 (f, = 210N / mm² ) .It is required to design the web reinforcements of the beam only with stirrups.( 10mm, Ag = 78.5mm²)a̟ = 35mm. nA SVI. No B. =1.0, V = a„f,bh, + fv° Data: C30 concrete (f=1.43N/mm², fc=14.3 N/mm²) HRB335 steel (f, = 300N / mm²) HPB235 steel (f, = 210N/mm² ) ho=465

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A simply supported rectangular beam has a width of 300mm and an effective depth to the centroid of tension reinforcement of 330mm. The tension reinforcement has an area of 2843mm2 and the area of compression reinforcement placed 70mm from the compression face of the beam is 1231.5mm2, fy = 415MPa, fc’ = 30MPa. Balanced steel ratio is 0.031. The design strength using 0.90 as the reduction factor is ____kN.m
T'he pin is made of a material having a failure shear stress of Tail = 100 MPa. Determine the minimum required diameter of the pin to the nearest mm. Apply a factor of safety of F.S. = 2.5 against shear failure. %3D 80 kN
The assembly consists of two posts AD and CF made of steel and having cross- sectional area of 1000 mm², and an aluminium post BE having a cross-sectional area of 1500 mm². If a central load P is applied to the rigid member ABC, determine the normal stress in each post. Take elastic modulus of steel and aluminium as 200 GPa and 70 GPa, respectively. PKN P [kN] -0.5 m- Last digit of Student ID 0, 1, 2, 3, 4 5,6,7,8,9 500 700 e.g. SID 21051234 P=700 A B -0.5 m C 0.4 m F Fig. 1-1 System with three posts Last digit
Column AB is made from high strength pre-cast concrete and reinforced with four in. diameter A-36 steel rods. The allowable normal stress for the high strength concrete and the steel are (allow)con = 2.4 ksi and (allow)st = 24 ksi, respectively. The modulus of elasticity for high strength concrete is 4.2 × 10³ ksi and for A-36 steel is 29 x 10³ ksi. (Figure 1) Figure 10 ft 9 in. H 9 in. Section a-a Part A Determine the magnitude of the maximum allowable floor loading P. Express your answer to three significant figures and include the appropriate units. Pmax = Submit 04 μA Provide Feedback Value Request Answer Units ?
Design the reinforcement of a rectangular beam to resist a dead load moment of 200kN.m (including its own weight) and a live load moment of 300kN.m. The beam is limited in size to 350mm by 600mm overall depth. Steel covering from centroid of bars to outermost fiber is 100mm for both tension and compression reinforcement. Use fc'=27.5Mpa, fy = 414MPa,20mm barsA. As'= 7 of 20mm and As=14 of 20mmB. As' = 9 of 20mm and As=18 of 20mmC. As'= 5 of 20mm and As=10 of 20mmD. As' = 3 of 20mm and As=6 of 20mm Please provide neat and clear solutions Note: kindly check below answer
A rectangular beam which is limited to 350 mm by 650 mm is reinforced at the compression side with As’ = 1,000 mm2and on the tension side As = 4,000 mm2. The beam has an effective depth of 510 mm and its neutral axis is located at 127.84 mm below the top of the beam. Assume steel in tension yields but that in compression does not yield. F’c = 35 MPa, β = 0.81, fy = 400 MPa. Steel covering on top is 50 mm. Determine stress of steel in compression. Determine the depth of compression stress block. Determine the moment capacity of the beam.
Design the reinforcement of a rectangular beam to resist a dead load moment of 200kN.m (including its own weight) and a live load moment of 300kN.m. The beam is limited in size to 350mm by 600mm overall depth. Steel covering from centroid of bars to outermost fiber is 100mm for both tension and compression reinforcement. Use fc'=27.5Mpa, fy = 414MPa,20mm barsA. As'= 7 of 20mm and As=14 of 20mmB. As' = 9 of 20mm and As=18 of 20mmC. As'= 5 of 20mm and As=10 of 20mmD. As' = 3 of 20mm and As=6 of 20mm Please provide neat and clear solutions
Find the maximum allowable value of P for the column. The cross-sectional areas and working stresses (ow) are shown in the figure. |2P Steel: A = 500 mm2 Ow = 120 MPa P Timber: 4P A = 2000 mm? Ow = 12 MPa Concrete: A = 8000 mm? O = 16 MPa
The beam AB of length L = 2m is consisted of two attached materials which are a solid aluminum %3D 9. core ( E, = 27 GPa, (tallow), = 80 MPa ) of Da = 10mm and a tubular steel (G =80 GPa, %3D %3D a (Tallow ). = 240 MPa) cover of (D3)inner = 10mm, (D,) outer = 16mm. Determine the maximum %3D %3D S. torsion T that can be applied to the beam at B without causing yielding either in the aluminum core or steel cover a St Al 10mm a (a-a Cross-section) T 16 mm
A square hollow steel structure with a wall thickness of t1 = 10 mm is pin linked to two gusset plates with a thickness of t2 = 12 mm, which are welded to a base plate with a thickness of 12 mm and secured to a concrete base with 4-16 mm diameter anchor bolts. The pin has a diameter of 16 mm. P = 48 kN compressive load, 30 deg. P= 48 kN Stnt gusset plate fy=12 mm 0=30 10 m 12 mm 16 mm ø anchor bolt 4-16 mm p 1. Determine the bearing stress in MPa between the struct and the pin. 2. Calculate the pin's shear stress in MPa. 3. Determine the anchor's shear stress in MPa.
Seatwork The beam shown is prestressed by using a bonded (stress relieved tendons) with a specified tensile strength of prestressing tendons strength fpu=1350 MPa, fc'=35 MPa. The area of prestressed reinforcement in tension zone Aps=1000 mm?. The specific yield strength of prestressing tendons sd, foy=1160 MPa. а. What is the value of the stress in prestressed reinforcement at nominal strength (Aps) b. What is the value of the depth of the compression block. С. What is the ultimate moment capacity of the prestressed beam. 0.85fc' 430 NA |(d-a/2) · A=1000 T=Ap.Sps 250
S9. Knowing that the allowable normal stress for the steel used is 150 MPa, select the most economical metric wide-flange beam to support the loading shown in Figure 9.0. 50 kN/m A D B -2.4 m- 0.8 m 0.8 m Figure 9.0 $10. Determine the average shearing stress in the web of the beam indicated and check whether the design obtained earlier for that beam is acceptable, knowing that the allowable shearing stress for the steel used is 110 MPa. Consider the beam of $9 above.