The rigid beam ABC is suspended from two steel rods as shown and is initially horizontal. The midpoint B of the beam is deflected 10 mm downward by the slow application of the force Q, after which the force is slowly removed. Knowing that the steel used for the rods is elastoplastic with E = 200 GPa and oy - 300 MPa, determine (a) the required maximum value of Q and the corresponding position of the beam, (b) the final position of the beam.

The rigid beam ABC is suspended from two steel rods as shown and is initially horizontal. The midpoint B of the beam is deflected 10 mm downward by the slow application of the force Q, after which the force is slowly removed. Knowing that the steel used for the rods is elastoplastic with E = 200 GPa and oy - 300 MPa, determine (a) the required maximum value of Q and the corresponding position of the beam, (b) the final position of the beam.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

please do not round it off until the final answer
Q. A cantilever, 2.5 m long carries a UDL of 20 kN/m. The breadth of the section remains constant and is equal to 100mm. Determine the depth of the section at midspan of the cantilever and at fixed end if stress remains same throughout as 120 N/mm2
If the pin at C has a diameter of 5 mm and is subjected to double shear, the maximum average shear stress, in MPa, is P B
A cantilever beam, 80 mm wide by 230 mm high and 8 m long, carries a load that varies uniformly from zero at the free end to 1200 N/m at the wall. Determine the magnitude of the stress in a fiber 60 mm from the top of the beam at a section 4 m from the free end. Answer must be in MPa.
PLEASE SHOW THE COMPLETE SOLUTION. CORRECT ANSWERS ARE SHOWN BELOW FOR YOUR REFERENCE. THANK YOU!
A cantilever beam, 90 mm wide by 270 mm high and 8 m long, carries a load that varies uniformly from zero at the free end to 1400 N/m at the wall. Determine the magnitude of the stress in a fiber 80 mm from the top of the beam at a section 5 m from the free end. Answer must be in MPa.
Show your solutions
Solve the problems below: 1. The assembly consists of two sections of galvanized steel pipe connected together using a reducing coupling at B. The smaller pipe has an outer diameter of 20 mm and an inner diameter of 18 mm, whereas the larger pipe has an outer diameter of 25 mm and an inner diameter of 20 mm. If the pipe is tightly secured to the wall at C, determine the maximum shear stress developed in eah section of the pipe when the couple shown is applied to the handles of the wrench. B 75 N 150 mm 200 mm 75 N
6. A continuous wood stave pipe is 2.5 m in diameter and is in service under a head of 30.0 m of water. The staves are secured by means of round 25 mm steel hoops with an allowable stress of 105 MPa. Find the maximum sparings of the hoops to safely secure the nine
A cantilever beam, 80 mm wide by 220 mm high and 8 m long, carries a load that varies uniformly from zero at the free end to 1500 N/m at the wall. Determine the magnitude of the stress in a fiber 70 mm from the top of the beam at a section 5 m from the free end. Answer must be in MPa.
find the shear and moment diagram, find max moment and max shear and the show solution
q3