Answered: The rigid bar weighs 5 kN/m, is…

The rigid bar weighs 5 kN/m, is supported as shown. The assembly is initially stress-free. Find the stress in each rod if the temperature rises 20°C after a load W= 150kN is applied.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.5.1P: A circular copper bar with diameter d = 3 in. is subjected to torques T = 30 kip-in. at its ends....

See similar textbooks

Similar questions

The rigid bar ABCD of negligible weight is initially horizontal, and the steel rods attached at A and C are stress-free. The 15-kip load is then applied and the temperature of the steel rods is changed by AT. Find AT for which the stresses in the two steel rods will be equal. Use a a = 6.5 x 106/ºF and E = 29 x 106 psi for steel. Hint: The type of force in the deformation diagram should be the same type as in the FBD 2 ft 2 ft 3 ft 2.5 ft 15 kips A = 0.5 in.² A = 0.75 in.? 1.5 ft
Two vertical steel rods support the rigid bar as shown. Initially, the rods are stress-free. Given the data below, determine the stress of rods A and B after the 20 kN load is applied. Neglect the weight of the bar and use E = 200 GPa for steel. L= 3 m D = 3.5 mm A. Stress of rod A (MPa) B B. Stress of rod B (MPa) C. At what temperature AT change would the stresses for both rods be equal? Use a = 11.7 L= 4 m x 10-6 mm/mmC° (C°) D = 5 mm 4m 2m 2m 20 kN
Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E = 120 Gpa and a Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 3.995 mm. determine the applied force F. Select one: O F= 2856 N OF = 2285 N OF = 7140N OF = 5712 N OF = 3427 N O F = 8568 N
The compound bar has an assembly shown. AB is steel (Es = 200 GPa, αs = 11.7 x 10-6 / oC) BC is brass (Eb = 105 GPa, αb = 20.9 x 10-6 / oC) Supports are fixed and unyielding. The rods are initially stressed free. Determine the stress (MPa) in brass for a temperature rise of 100 oC. Neglect the weight of the materials.
A mild steel rod of 25 mm diameter and 400 m long is encased centrally inside a hollow coppertube of external diameter 35 mm and inside diameter 30 mm. The ends of the rod and tube arerigidly attached, and the composite bar is subjected to an axial pull of 40 kN. If E for steel andcooper is 200 GN/m2 and 100 GN/m2 respectively, find the stress developed in the rod and thetube. Find also the extension of the rod.
The circular column is subjected to a compressive force of 5kN if the stress in the column is limitedto 17.63MPa, what is the limiting value of diameter d?
Let’s consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young’s modulus E = 200 Gpa and a Poisson’s ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 5.998 mm. determine the applied force F.
The horizontal steel rod, 2.5 m long and 1200 mm2 in crosssectional area, is secured between two walls as. If the rod is stress-free at 20_C, compute the stress when the temperature has dropped to _20_C. Assume that (1) the walls do not move and (2) the walls move together a distance Δ = 0.5 mm. Use α = 11.7x10-6 oC and E = 200 GPa.
Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 5.995 mm. determine the applied force F. Select one: O F=15708N O F= 10472 N O F=5236 N O F= 13090 N O F=6283 N O F=4189 N
Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 3.995 mm. determine the applied force F. Select one: F = 10472 N O F = 6283N O F= 15708 N O F = 4189N O F = 5236 N O F = 13090 N Clear my choice
Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force Fis subjected to that rod cross-section, the diameter becomes 5.998 mm. determine the applied force F. Select one: O F=15708 N O F= 5236 N O F= 6283 N O F=4189 N O F= 10472 N O F= 13090N Clear my choice Finish attempt. IOUS ACTIVITY 360 Test - Spring 2020-2021 Jump to. 11:21 PM 4) G ENG 4/15/2021 LEGO ort sc delete end home backspace num lock 7V home enter 4E K pause M
Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a material having a Young's modulus E = 120 Gpa anda Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 4.995 mm. determine the applied force F.