Steam flows through a nozzle at mass flow rate of m = 0.1 kg/s with a heat loss of 5 kW. The enthalpies at inlet and exit are 2500 kJ/kg and 2350 kJ/kg, respectively. Assuming negligible velocity at inlet (C₁ = 0), the velocity (C₂) of steam (in m/s) at the nozzle exit is (correct to two decimal places) Q = 5 kW h₁ = 2500 kJ/kg C₁ = 0 m= 0.1 kg/s h₂ = 2350 kJ/kg C₂ 28/4

Steam flows through a nozzle at mass flow rate of m = 0.1 kg/s with a heat loss of 5 kW. The enthalpies at inlet and exit are 2500 kJ/kg and 2350 kJ/kg, respectively. Assuming negligible velocity at inlet (C₁ = 0), the velocity (C₂) of steam (in m/s) at the nozzle exit is (correct to two decimal places) Q = 5 kW h₁ = 2500 kJ/kg C₁ = 0 m= 0.1 kg/s h₂ = 2350 kJ/kg C₂ 28/4

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

QUICKLY AND CORRECTLY PLEASE Inside a 150 m3 room is a 30 m3 inflated balloon. The room temperature is 28oC and the initial pressure of air in the room is 105 kPa. Now the balloon burst and the pressure of air inside the room becomes 120 kPa. (a) Determine the mass of air initially inside the room (outside the balloon) and (b) the pressure gage of air initially inside the balloon in kPa.
T10a please help me with the answer and full solution
Box the final answer. Write legibly. Steam flows into a turbine at a rate of 3.5 kg/s and ¾ MW of heat are lost from the turbine. Ignoring elevation and kinetic energy effects, calculate the power output from the turbine in KW? Steam pressure entering the turbine is 62 Bar at 440ºC and leaves at 74 Kpa.
Thermodynamics
Which of the following is incorrect about the overall energy balance and mechanical energy balance in fluid flow phenomena?A. The former only accounts the first law of thermodynamics while the latter includes the second.B. The former only accounts the work brought by changes in the volume while the latter includes the Δ(PV) work.C. The enthalpy of the system for both balance is the sum of the changes in the internal energy and the reversible work at constant pressure.D. The former is not often used to evaluate a system with changing pressure unlike the latter.
Time left 0:22:28 Air enters a compressor with h₁ = 378.7 kJ/kg and exists with h₂ = 7134 k/kg Steam enters a turbine with the shown conditions and exis's the turbine with quality x= 15%. If 13.4% of the turbine power is used to drive the compressor and the rest of the turbine power is sed to drive an electrical generator that needs 1.35 MW, what is the mass flow rate of the air (kg/s)? Note: Enter your answer. 1 MPa 10.0MP 700°C Answer: > < Air compressor ON L.P
Please state the assumptions and tables.
3. A fluid system undergoes a non-flow frictionless process from 5.5 ft to a final volume 2.5 ft in accordance with the defining relation P= 60/V + 23 psi, where volume is in ft. During the process the system reject 30 BTU of heat. Determine the change in enthalpy and internal energy.
A fluid flowing in a pipe 1000 ft above the reference line at a pressure of 200 psia, specific volume of 2 ft3 /lb, velocity of 200 ft/sec and internal energy of 100 Btu/lbm. Determine (a) the total energy of the flowing fluid with respect to the reference line and (b) the specific enthalpy in Btu/lbm . Local gravity is 32 ft/sec2 .
q2,cd
A tank initially contained 500 kg of nitrogen. The tank has 4 valves connected to it. 20 kg of nitrogen entered the tank though valve 1, 70 kg of nitrogen left the tank through valve 2, 125 kg of nitrogen entered the tank through valve 3, and 200 kg of nitrogen left the tank through valve 4. The final mass of nitrogen in the tank in kg is
Steam is accelerated in a nozzle from a velocity of 80 to an unknown outlet velocity. S = The area at the inlet to the nozzle is A₁ 50 cm². The temperature and pressure at the inlet to the nozzle are T₁ = 400°C and p₁ = 50 bar, respectively, and the outlet temperature and pressure are T₂ = 300°C and Qout = 120 kW P2 = 20 bar, respectively. During the steady-state flow, heat is lost from the nozzle walls at a rate of 120 kW. For the nozzle: 1 2 400 300 a) Determine the mass flow rate of the steam entering the nozzle, in units of [] b) Determine the velocity at the outlet of the nozzle, in units of [m/s] c) Determine the area at the outlet of the nozzle, in units of [cm²] State T, °C P, bar 60 20 V, m 3 kg 0.04739 0.1308 m vel₁ 80- S A₁ = 50 cm² T₁ = 400 °C P₁ = 50 bar kJ kg kg 2892.9 3177.2 2807.9 3069.5 U, kJ — 1 h, (2) P2 = 20 bar T2 = 300 °C