Show complete solutions and figures. The shown tank with an attached manometer contains water unit weight is 9.79 kN/cu.m.at 200oC. The atmospheric pressure is 100kPa. There is a valve located 1m from the surface of the water in the manometer. The valve is closed trapping the air in the manometer, and the water is added to the tank to the level of the valve. Find the increase in the elevation of the water in the manometer assuming the air in the manometer is compressed isothermally. a) 101.3mm b) 92.7mm c) 73.2mm d) 82.4mm e) None

Show complete solutions and figures. The shown tank with an attached manometer contains water unit weight is 9.79 kN/cu.m.at 200oC. The atmospheric pressure is 100kPa. There is a valve located 1m from the surface of the water in the manometer. The valve is closed trapping the air in the manometer, and the water is added to the tank to the level of the valve. Find the increase in the elevation of the water in the manometer assuming the air in the manometer is compressed isothermally. a) 101.3mm b) 92.7mm c) 73.2mm d) 82.4mm e) None

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter8: Engineering Materials

Section: Chapter Questions

Problem 85CQ

See similar textbooks

Related questions

Q: 12. A pipe contains an oil of sp. gr. 0.8. A differential manometer connected at the two points A…

A: h2-h1=0.2m

Q: Darcy Experiment A set-up of Darcy Experiment involves measuring the pressure head at two…

A: Given data Hydraulic head at 1 (h1) = 66cm Hydraulic head at 2 (h2) = 54cm Travel distance (L) =…

Q: (3) An open jet of water at 20 °C exits a nozzle into sea-level air and strikes a stagnation tube,…

A: Consider the free body diagram ; Given data Pressure at section-1 (P1) =110kpa…

Q: Hydraulics 5. Obtain the gage pressure in a vessel of mercury at a point 475 mm below the liquid…

A: Given data- Depth (h) = 475 mm The liquid is Mercury.

Q: The diameter of a horizontal tube is 4 in., in which tetrabromoethane (spec. grav. = 0.30) is…

Q: A pressure gage at elevation 12 m at the side of the tank containing a liquid reads 100 kPa. Another…

Q: The cyclindrical tank with hemispherical ends shown in Fig. contains a volatile liquid and its…

Q: A single colurmn vertical manometer (i.e., micrometer) is connected to a pipe containing oil of sp.…

Q: EL 7 m (s, -0,75) EL 4.5 m EL 4.35 (s2 - 1.00) EL 2.15 EL 2 m (s3 1.50) EL O

A: The pressure at a different level, P = γH. γ - Unit weight of the fluid.H - Head of the fluid.…

Q: Liquid A, B, and C in the container shown below have specific gravities of 0.80, 1.00 and 1.60,…

Q: Q A U-tube manometer is connected to a pipe for measuring the pressure of oil (Specific gravity…

A: Given:- The specific gravity of the oil = 0.92 The specific gravity of the mercury = 13.6 The…

Q: Q-A glass tube of 2.5 mm internal diameter is immersed in oil of mass density 940 kg/m³ to a depth…

A: Given- Internal diameter=2.5 mm, Mass density=940 kg/m3, Depth=9 mm, Pressure=148 N/m2

Q: A cylindrical tank with a diameter D' = 50 mm is emptied by a tube with diameter D = 1mm and length…

A: Given, Diameter of tank = 50 mm or 0.05 m Diameter of tube = 1 mm or 0.001 m Length of tube = 1 m…

Q: Figure 1 shows the manometer apparatus with different fluids. mercury and oil are 13.56, and 0.9…

A: Given data in question Specific gravity Depth Area ratio Volume x = Volume y To find out Delta Z…

Q: The flow of water in the below diagram is from point X to Y. The oil is i of the inverted U-tube…

Q: A solvent used for plastic manufacturing consists of cyclohexanol in tank A and ethyl lactate in…

A: Specicific gravity of cyclohexanol, Sc=0.953Specific gravity of mercury, SHg=13.55Specific gravity…

Q: Question Liquid (S 1.5) A U-tube differential manometer containing two pipes at A and B. Pipe A…

A: Given; Specific gravity of liquid at A,S1=1.5 Specific gravity of liquid at B,S2=0.8 Pressure at…

Q: a pipe has a pressure of 4000 pascal and is connected to a 36 degree inclined single column…

A: We will take pressure at top level of mercury in reservoir same from both left and right side.

Q: Problem 4. The open tank shown in the figure have 2 piezometers attached on one side, containing two…

Q: 3. A solid cylinder d= 100mm and h = 95mm weighing 3.75N is immersed in a liquid SG = 0.9 inside a…

A: Let the height above the Liquid surface =h mLet the height above the Liquid surface =0.095-h mSO…

Q: 4. The pressure intensity at a point in a fluid is give is: (a) water, and (b) an oil of sp. gr.…

A: p=4.9N/cm2

Q: The cylindrical tank with hemispherical ends shown contains a volatile liquid and its vapor. the…

A: Gage Pressure: It is defined as the pressure measured with respect to atmospheric pressure. This…

Q: Figure 1 shows the manometer apparatus with different fluids. It is given that the specific density…

Concept explainers

Pressure and Stress

Question

Show complete solutions and figures.

The shown tank with an attached manometer contains water unit weight is 9.79 kN/cu.m.at 200^oC. The atmospheric pressure is 100kPa. There is a valve located 1m from the surface of the water in the manometer. The valve is closed trapping the air in the manometer, and the water is added to the tank to the level of the valve. Find the increase in the elevation of the water in the manometer assuming the air in the manometer is compressed isothermally.

a) 101.3mm b) 92.7mm c) 73.2mm d) 82.4mm e) None

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.