Required informationNOTE: This is a multi-part question. Once an answer is submitted, youwill be unable to return to this part.Consider an ice-producing plant that operates on the ideal vaporcompression refrigeration cycle and uses refrigerant-134a as theworking fluid. The refrigeration cycle operating conditions require anevaporator pressure of 180 kPa and the condenser pressure of 1400kPa. Cooling water flows through the water jacket surrounding thecondenser and is supplied at the rate of 250 kg/s. The cooling waterhas a 10°C temperature rise as it flows through the water jacket. Toproduce ice, potable water is supplied to the chiller section of therefrigeration cycle. For each kg of ice produced, 333 kJ of energy mustbe removed from the potable water supply.(Take the required values from saturated refrigerant-134a tables.)Determine the mass flow rate of the potable water supply, in kg/s.The mass flow rate of the potable water supply iskg/s.

Refrigerant is R-134aEvaporator pressure P1 = P4 = 180 kPaCondenser pressure P2 = P3 = 1400 kPaMass…

Answered: Required information NOTE: This is a…

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. Consider a refrigerator that uses refrigerant-134a as its working fluid and operates on the ideal vapor-compression refrigeration cycle except that the compression process is non-ideal. The condenser is maintained at 900 kPa, and the evaporator at -26°C. Assume that Stream 1 is a saturated vapor and that Stream 3 is a saturated liquid. 3 Warm environment QH HAMA Condenser Expansion valve Evaporator Jum Cold refrigerated space 2 Win Compressor a) If the mass flow of the refrigerant is 1.2 kg/s, what is the rate of heat removal from the cold space? Give your answer to the nearest kW. b) What is the COP of this refrigerator if the compressor has an isentropic efficiency of 87%?
An air conditioner based on the vapor-compression refrigeration cycle uses R-134a as the working fluid. The air conditioner will used to cool a 0.3 kg/s stream of dry air from 40°C to -5°C. The air conditioner operates in 40°C surroundings and the compressor efficiency is 75%. a) Select evaporator and condenser pressures that will allow heat to be transferred from the air stream to the R-134a in the evaporator, and from the R-134a to the surroundings in the condenser. b) Find the coefficient of performance of the refrigeration cycle. c) Find the power input needed to operate the air conditioner, in kW. Use Cengel's R-134a tables posted on Canvas to model the refrigerant. Expansion Valve TOUT = -5°C 3 40°C Surroundings QCONDENSER 2 Condenser Evaporator 1 QEVAPORATOR -MAIR = 0.3 kg/s Compressor TIN = 40°C COMPRESSOR
! Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50°C at a rate of 0.024 kg/s and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 4°C. (Take the required values from saturated refrigerant-134a tables.) Он 750 kPa (3) Condenser Expansion valve Evaporator +M QL 800 kPa 50°C Compressor Determine the COP of the heat pump. (You must provide an answer before moving to the next part.) The COP of the heat pump is
ervi n.k2603@sadiq.edu.iq SwMO Aslacel Asiacell jjs 0701 The name and photo associated with your Google account will be recorded when you upload files and submit this form. Your email is not part of 070E your response. Required Untitled Question * Q1: Refrigerant-134a is the working fluid in an ideal compression refrigeration cycle. The refrigerant leaves the evaporator -20°C and has a condenser pressure of 0.9 MPa. The mass flow rate is 3 kg/min. Find COP, COPR Carnot for same Tma and Tmin , and the tons of refrigeration. 1 Add file Untitled Question * Q2: A simple VCRC using R-134a operates with a condensing temperature of 30°c and an evaporating temperature of -20°c .The system produces 50 kw of refrigeration. Determine the : a) Thermodynamic property values at the four main state points of the cycle, b) COP, c) Rate of refrigerant flow. 1 Add file Submit Clear form This form was created inside of tmam Ja'afar Al-Sadia وأثق السلأمي 11:41p äc lull 22.04.02
A vapor-compression refrigeration system which utilizes refrigerant 134a as the working fluid comprises the two-stage compression configuration seen in the schematic below, with intercooling between the stages. 5 Condenser Expansion valve High-pressure compressor 6 3 Flash chamber 9 2 7 Expansion valve Low-pressure compressor Evaporator 1 The direct contact heat exchanger and the flash drum operate at 4 MPa, and the condenser pressure is 1.2 MPa. Saturated vapor at -30 °C enters the first compressor stage. Saturated liquid streams at 0.4 MPa and 1.2 MPa enter the low- and high-pressure expansion valves, respectively. The refrigeration capacity of the system is estimated to be 35.2 kW and each compressor is assumed to operate isentropically. Evaluate each compressor power input and the overall coefficient of performance of the system.
The ordinary household refrigerator is a good example of the application of this cycle. Evaporator Freezer compartment Capillary ube Kitchen air 25°C -18°C Condenser coils 3°C Comprosor HW: Q1: Refrigerant-134a is the working fluid in an ideal compression refrigeration cycle. The refrigerant leaves the evaporator -20°C and has a condenser pressure of 0.9 MPa. The mass flow rate is 3 kg/min. Find COP,, COPR. Camat for same Tmas and Tmin, and the tons of refrigeration. Q2: A simple VCRC using R-134a operates with a condensing temperature of 30°c and an evaporating temperature of -20°c .The system produces 50 kw of refrigeration. Determine the : a) Thermodynamic property values at the four main state points of the cycle, b) COP, c) Rate of refrigerant flow. Another measure of the effectiveness of the refrigeration cycle is how much input power to the compressor, in horsepower, is required for each Ton of cooling. The unit conversion is 4.715 hp per Ton of cooling To convert from COP to…
! Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Consider a two-stage cascade refrigeration cycle with a flash chamber as shown in the figure with refrigerant-134a as the working fluid. The evaporator temperature is −10°C and the condenser pressure is 1600 kPa. The refrigerant leaves the condenser as a saturated liquid and is throttled to a flash chamber operating at 0.45 MPa. Part of the refrigerant evaporates during this flashing process, and this vapor is mixed with the refrigerant leaving the low-pressure compressor. The mixture is then compressed to the condenser pressure by the high-pressure compressor. The liquid in the flash chamber is throttled to the evaporator pressure and cools the refrigerated space as it vaporizes in the evaporator. The mass flow rate of the refrigerant through the low-pressure compressor is 0.11 kg/s. Assume that the refrigerant leaves the evaporator as a saturated vapor…
Please only answer question 4 Parts C and D
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.29 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of 430 W from the surroundings. The heat exchanger loses no heat to the environment. 26°C 42°C ↓ Condenser 3 Expansion valve Water 18°C Evaporator QL (2) 1.2 MPa 65°C lin Win Compressor 60 kPa -34°C Determine the COP of the refrigerator. (You must provide an answer before moving on to the next part.) The COP of the refrigerator is
MODULE: THERMODYNAMIC QUESTION 5 Consider a two-stage cascade refrigeration cycle with a flash chamber as shown in the figure with refrigerant-134a as the working fluid. The evaporator temperature is −10.09°C and the condenser pressure is 1600 kPa. The refrigerant leaves the condenser as a saturated liquid and is throttled to a flash chamber operating at 0.4 MPa. Part of the refrigerant evaporates during this flashing process, and this vapour is mixed with the refrigerant leaving the low-pressure compressor. The mixture is then compressed to the condenser pressure by the high-pressure compressor. The liquid in the flash chamber is throttled to the evaporator pressure and cools the refrigerated space as it vaporizes in the evaporator. Assuming the refrigerant leaves the evaporator as a saturated vapour determine the COP of this refrigerator. NOTE: Your answer should be in 2 decimal places.

Recommended textbooks for you

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Control Systems Engineering

Mechanical Engineering

ISBN:

9781118170519

Author:

Norman S. Nise

Publisher:

WILEY

Mechanics of Materials (MindTap Course List)

Mechanical Engineering

ISBN:

9781337093347

Author:

Barry J. Goodno, James M. Gere

Publisher:

Cengage Learning

Engineering Mechanics: Statics

Mechanical Engineering

ISBN:

9781118807330

Author:

James L. Meriam, L. G. Kraige, J. N. Bolton

Publisher:

WILEY

SEE MORE TEXTBOOKS