Question 4.4A core was mounted in a gas permeameter to measure permeability, and thefollowing laboratory data are obtained from the experiment:Diameter of the core = 2.59 cm- Length of the core = 6.03 cm- Gas viscosity = 0.0148 cPq [cm/s]Р, [КРa]P, [kPa]13.0965.413.57.9144.611.24.1225.36.43.2319.44.1Determine the gas permeability and equivalent liquid permeability of the coreusing the above data (in Darcy units).

Answered: Image /qna-images/answer/2ffaaa37-d8b5-4681-a1d8-2a5879fc5275.jpg

Question 4.4 A core was mounted in a gas permeameter to measure permeability, and the following laboratory data are obtained from the experiment: - Diameter of the core = 2.59 cm %3D - Length of the core = 6.03 cm %3D - Gas viscosity = 0.0148 cP q (cm/s] P, [kPa] P, [kPa] 13.09 65.4 13.5 7.91 44.6 11.2 4.12 25.3 6.4 3.23 19.4 4.1 Determine the gas permeability and equivalent liquid permeability of the core using the above data (in Darcy units).

Question 4.4 A core was mounted in a gas permeameter to measure permeability, and the following laboratory data are obtained from the experiment: - Diameter of the core = 2.59 cm %3D - Length of the core = 6.03 cm %3D - Gas viscosity = 0.0148 cP q (cm/s] P, [kPa] P, [kPa] 13.09 65.4 13.5 7.91 44.6 11.2 4.12 25.3 6.4 3.23 19.4 4.1 Determine the gas permeability and equivalent liquid permeability of the core using the above data (in Darcy units).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A constant volume gas thermometer is used to determine the temperature of an unknown fluid. Pressure…

A: A constant volume gas thermometer is typically made up of a bulb filled with a predetermined amount…

Q: Plasma or Serum Colloid osmotic pressure -330 mm H,O pH 7.3–7.5 Viscosity (37°C) 1.2 cP Specific…

A: The value of viscosity is given in the table only.

Q: What is the heat loss coefficient that has a symbol Uair and is found from (volumetric flow density…

A: Given Data The volume is: V=23814 ft3 The natural air change oer hour is: ACPH=0.04 To Determine The…

Q: Part A The data below shows the laboratory data for a fluid obtained using a viscometer at 20°C and…

A: According to Newton's law of viscosity, the shear stress is the product of the absolute viscosity…

Q: The pump in the figure draws water from an 8-in. suction pipe and discharges through a 6-in. pipe in…

A: Velocity at point C = 12 ft/s Pressure at point A = -5 psi Efficiency = 70%

Q: B2) An automotive engine can be assumed as rectangular block with approximation size 0.4 m high, 0.6…

Q: The drag forces on objects of different size but similar shape have been measured in a moving fluid.…

A: GivenThe drag force can be calculated using the following formula:Where:D is the drag force.Cd is…

Q: 2. Outcomes 1 and 4.Show and explain all work. You must show and explain all work. The drag on the…

Q: SAE 10W-30 oil with viscosity 1 x 10-4 lbf s/ft2 is used as a lubricant between two parts of a…

Q: What is the Reynolds number and flow regime at the beginning and at the end of the pipe? If the…

A: It is given that Diameter of pipe (d)= 50 cm = 0.50 m length of pipe (L)= 10 m mass flow rate m.=…

Q: I need help correcting this problem (incorrect attempts are attached). Please step-by-step.

A: The drag force can be calculated using the following formula:Where:D is the drag force.Cd is the…

Q: η =2gr^2(ps−pl)/ 9v State the value of the viscosity and error on the value obtained in your…

A: To solve this problem, we need to use the given formula:Let's substitute the given values:Now, let's…

Q: 19 Find an expression for isothermal bulk modulus of elasticity for a gas which obeys Van der Waals…

Q: C1 (b). Calculate the capillary effect in mm in a glass tube of 4.2 mm diameter, when immersed in…

A: Solution C1(b): Given data: Diameter of the glass tube, d = 4.2 mm. The surface tension of water,…

Q: You are developing a porous membrane for use in a dialysis system. The membrane must be able to…

A: The fluid viscosity is μ=1.5 cP=0.015 poise The fluid flow rate is q=500cm3min The surface area of…

Q: Consider an Airbus A330, whose cargo hold has a volume of 43.3 m³. Assume the passenger compartment…

A: The volume of compartment is .The temperature is .The molecular weight of air is .The gas constant…

Q: QUESTION 1 A 1/5 scale model of a race car is to be tested in a pressurised air wind tunnel. In…

Concept explainers

Properties of Fluids

The term fluid represents a type of substance that can easily change its shape under any external pressure/force and can flow. Fluids can acquire any shape in which it is stored and can resist normal stresses but cannot resist shear stress in rest condition. Whenever external shear stress is applied to fluids, it starts to flow. The fluids may be liquid or gas. Example- water, air, etc.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

% ParametersD = 0.1; % Diameter of the tube (m)L = 1.0; % Length of the tube bundle (m)N = 8; % Number of tubes in the bundleU = 1.0; % Inlet velocity (m/s)rho = 1.2; % Density of the fluid (kg/m^3)mu = 0.01; % Dynamic viscosity of the fluid (Pa.s) % Define the grid size and time stepdx = D/10; % Spatial step size (m)dy = L/10; % Spatial step size (m)dt = 0.01; % Time step size (s) % Calculate the number of grid points in each directionnx = ceil(D/dx) + 1;ny = ceil(L/dy) + 1; % Create the velocity matrixU_matrix = U * ones(nx, ny); % Perform the iterationsfor iter = 1:100 % Calculate the velocity gradients dUdx = (U_matrix(:, 2:end) - U_matrix(:, 1:end-1)) / dx; dUdy = (U_matrix(2:end, :) - U_matrix(1:end-1, :)) / dy; % Calculate the pressure gradients dpdx = -mu * dUdx; dpdy = -mu * dUdy; % Calculate the change in velocity dU = dt * (dpdx / rho); % Update the velocity matrix U_matrix(:, 2:end-1) = U_matrix(:, 2:end-1) + dU; % Apply…
f. A study of the physical characteristic of honey was conducted due to the large demand of royal jelly. A capillary tube viscometer was used by a researcher in determining the viscosity of the honey. The viscometer is 250 mm long with an outside diameter of 55mm and effective thickness of 2.5mm and was used horizontally so that the effect of gravity was neglected. At an ambient temperature of 30°C the following data were collected: Q (cc/s) 1.25 1.55 1.80 2.05 ДР (Ра) 10.0 12.5 15 17.5 20.0 2.55 What will be the stress produced per unit length in the tube used in the production of royal jelly if it has a radius of 5mm and a flow of 1 capsule per second. (1 capsule = 0.85 cc of royal jelly).
Kerosene has an API gravity of 42.5. What is the specific gravity of kerosene at 16°C? How does this compare with the value in Table 2.7? What is the energy density (MJ/L) of kerosene at 16°C? Use the data given in Table 2.7.
1. To determine the dynamic viscosity of a liquid you take repeated measurements of the liquid density and kinematic viscosity. These data are summarized in the following table: Avg. measurement Total Uncertainty P 999 kg/m³ ±0.5% V 1.23 mm²/s ±0.01 mm²/s kg Ns What is the dynamic viscosity? Give dynamic viscosity in units of; which is the same as ms 2. Determine the absolute and relative uncertainties in the dynamic viscosity.
The kinematic viscosity of and specific gravity of a liquid are 3.5 x 10-4 m^2 /s and 0.79, respectively. What is the dynamic viscosity of the liquid in N-s/m^2?
A gymnast holds a steady handstand on the top of the uneven bars as shown. ITNEASTICS a. As long as the gymnast grasps the bar and holds this position, how many degrees of freedom are represented by this system? (explain) b. The 2.5 m bar has a 3.5 cm diameter, a linear density of u = 8 kg/m and a modulus of Elasticity of E = 8000 MPa, and the gymnast has a mass of 45 kg. What is the static deflection of the midpoint of the bar? c. What is the dynamic equation for the vertical motion of the bar about the static equilibrium point as the gymnast holds this position? d. What is the characteristic equation and natural frequency of the motion?
Find visocisity of whole blood @ 37oC
1. What is a fluid? kg [6 marks] 2. A tank is filled with oil with density p = 830; If the volume of the tank is V = 1.01m³ determine the amount of mass in the tank in kilograms. Show your workings. m³ [6 marks] 3. A pipe of diameter 0.18 m has a flow rate of 0.025 m³/s, what is the average velocity in the pipe? Show your workings. [6 marks] 4. The flow rate in a pipe is 1446 litres per minute, what is this in SI units Show your workings. )? [5 marks] 5. The equation below is a simplified form of the continuity equation. dm dt CV Σmin -Σmout The derivative term with respect to time is which of the following: a. The rate of change of the mass within a given control volume b. Always zero by definition c. Zero for transient time dependant flow conditions d. Zero when the mass flow rate coming into the control volume is smaller than the mass flow rate exiting the control volume e. Zero when the mass flow rate entering the control volume is greater than the mass flow rate leaving the…
Can you help with both please.