f. A study of the physical characteristic of honey was conducted due to the large demand of royal jelly. A capillary tube viscometer was used by a researcher in determining the viscosity of the honey. The viscometer is 250 mm long with an outside diameter of 55mm and effective thickness of 2.5mm and was used horizontally so that the effect of gravity was neglected. At an ambient temperature of 30°C the following data were collected: ΔΡ (Pa) 10.0 Q (cc/s) 1.25 1.55 12.5 15 17.5 20.0 1.80 2.05 2.55 What will be the stress produced per unit length in the tube used in the production of royal jelly if it has a radius of 5mm and a flow of 1 capsule per second. (1 capsule = 0.85 cc of royal jelly).

f. A study of the physical characteristic of honey was conducted due to the large demand of royal jelly. A capillary tube viscometer was used by a researcher in determining the viscosity of the honey. The viscometer is 250 mm long with an outside diameter of 55mm and effective thickness of 2.5mm and was used horizontally so that the effect of gravity was neglected. At an ambient temperature of 30°C the following data were collected: ΔΡ (Pa) 10.0 Q (cc/s) 1.25 1.55 12.5 15 17.5 20.0 1.80 2.05 2.55 What will be the stress produced per unit length in the tube used in the production of royal jelly if it has a radius of 5mm and a flow of 1 capsule per second. (1 capsule = 0.85 cc of royal jelly).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Liquid A(sp gr = 1.02) at a temperature of 29°C is flowing at a rate of 124gal/min in a pipe with an inside diameter of 2.887 in. If the Reynolds number is 9.1 x 105 6, what is the viscosity of liquid A in centipoise. Express in 4 decimal values.
A device's outer cylinder diameter is 5" and its distance from outer cylinder to the inner cylinder is 0.0345". The said outer cylinder of the device is rotated at 219 rpm and produces a torque of 1.20 lbf-ft. Determine the viscosity of the fluid inside the concentric cylinders of the viscometer it its length is 3'. Express your answer in 7 decimal places and in Ibf-s/ft?.
B1. Determine the kinematic viscosity of the fluid between the plates as shown in Figure B1 given the following information: F = 5N h = 0.5mm v = 7m/s L=21 cm w = 10cm SG= 0.80 Moving plate Stationary plate Fluid Figure B1 V
Calculate the uncertainty for the MW if the intrinsic viscosity was measured to be 0.20 g/dL (u is 0.02 g/dL) using the Mark-Houwink constants a = 0.31 and K = 0.0040 dL/g. Propagate the uncertainty.
A steel ball with the density of 6324 kg/m and the radius of 0,48 cm was dropped into the oil whose viscosity was to be measured as is seen in the figure. When the ball attains a constant velocity, the distance that the ball travelled was measured as 97 cm within the time interval of 4 sec. Before the experiment, the mass of the 100 ml-oil was measured as 2,8 gr. According to the data given above, find; a) the density of the oil (in kg/m). (Please do not use any decimal digit.) Yanıt:
P2, µ2 2h P1 Po ρ1, μι L Figure 3: Two layer flow for (b) (b) Consider two immiscible (do not mix) fluid layers with different densities and viscosities which glide smoothly between two parallel horizontal walls, as shown in figure 3. Let pı and p2 be the densities and µ1 and µ2 be the viscosities of the two fluids, respectively. The flow is the result of an imposed constant pressure gradient, 2, similar to that of the Poiseuille flow. Assume a steady, incompressible, parallel viscous flow with p1 > P2 and µi > µ2- (i) Using the Navier-Stokes equations find the velocity profiles of both fluids. (ii) Ensure the fluid obeys the following conditions: The shear stress is continuous at the interface between the two fluids. • The velocity profile is continuous at the interface between the two fluids. No-slip boundary at the walls. (iii) Sketch the velocity profile. (iv) Determine where the maximum velocity occurs and explain why. (Hint: think about the respective viscosities and densities).…
A study of the physical characteristic of honey was conducted due to the large demand of royal jelly. A capillary tube viscometer was used by a researcher in determining the viscosity of the honey. The viscometer is 250 mm long with an outside diameter of 55mm and effective thickness of 2.5mm and was used horizontally so that the effect of gravity was neglected. At an ambient temperature of 300C the following data were collected: \ΔΡ (Pa) Q (cc/s) 10.0 1.25 12.5 1.55 15 1.80 17.5 2.05 20.0 2.55 What will be the stress produced per unit length in the tube used in the production of royal jelly if it has a radius of 5mm and a flow of 1 capsule per second. (1 capsule = 0.85 cc of royal jelly).
A device's outer cylinder diameter is 7" and its distance from outer cylinder to the inner cylinder is 0.0356". The said outer cylinder of the device is rotated at 242 rpm and produces a torque of 1.59 lbf-ft. Determine the viscosity of the fluid inside the concentric cylinders of the viscometer it its length is 4'. Express your answer in 7 decimal places and in lbf-s/ft2. (ANSWER MUST BE 7 DECIMALS)
A gas whose viscosity is 0.98 centipoise flows through a tube 1.0 mm in diameter and 200 mm long. Find the volume in cubic centimetre of the gas which passes through the tube every 10 secs at a pressure of 2 atm.
A study of the physical characteristic of honey was conducted due to thelarge demand of royal jelly. A capillary tube viscometer was used by aresearcher in determining the viscosity of the honey. The viscometer is250 mm long with an outside diameter of 55mm and effective thickness of2.5mm and was used horizontally so that the effect of gravity wasneglected. At an ambient temperature of 30oC the following data werecollected: ΔP (Pa) Q (cc/s)10.0 1.2512.5 1.5515 1.8017.5 2.0520.0 2.55 What will be the stress produced per unit length in the tube used in theproduction of royal jelly if it has a radius of 5mm and a flow of 1 capsuleper second. (1 capsule = 0.85 cc of royal jelly).
A device's outer cylinder diameter is 5" and its distance from outer cylinder to the inner cylinder is 0.0411". The said outer cylinder of the device is rotated at 296 rpm and produces a torque of 1.99 lbf-ft. Determine the viscosity of the fluid inside the concentric cylinders of the viscometer it its length is 5'. Express your answer in 7 decimal places and in lbf-s/ft2.
The viscosity of crude oil under conditions of standard temperature and pressure is 7.13(10^-3) N · s/m^2. The viscosity of crude oil in U.S. Customary units (lb · s/ft^2) is?