Q6. As shown in the image below, the spring (with spring constant k = 2.4 kN/m) is fixed to block A, and block B is pressed against the spring. The masses of blocks A and B are mÃ = 19 kg and m² = 15 kg, respectively. The spring is initially compressed by 240 mm, and then both blocks are released from rest. Determine the velocity of block A at the instant block Bloses contact with the spring. Right is considered the positive direction and negative sign must be included if the velocity points to the left. (Hint, neglect friction, and since there is no impulsive force, energy is conserved.) Please pay attention: the numbers may change since they are randomized. Your answer must include 3 places after the decimal point, and proper SI unit. Your Answer: k B

Q6. As shown in the image below, the spring (with spring constant k = 2.4 kN/m) is fixed to block A, and block B is pressed against the spring. The masses of blocks A and B are mÃ = 19 kg and m² = 15 kg, respectively. The spring is initially compressed by 240 mm, and then both blocks are released from rest. Determine the velocity of block A at the instant block Bloses contact with the spring. Right is considered the positive direction and negative sign must be included if the velocity points to the left. (Hint, neglect friction, and since there is no impulsive force, energy is conserved.) Please pay attention: the numbers may change since they are randomized. Your answer must include 3 places after the decimal point, and proper SI unit. Your Answer: k B

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

* 5. In preliminary design studies for a sun- powered car, it is estimated that the mass of the car and driver will be m kg and the torque produced by the engine will result in a F, newton tangential force on the car. Suppose that the car starts from rest on the track at A and is subjected to a constant Ft newton tangential force. Determine the magnitude of the car's velocity and the normal component of R m END B A START l m Figure 5. force on the car when it reaches B. m = .15.. kg Fe .newton .m R = 31.25
The 4-lb collar is compressed against a spring a distance of 6 inches and then releasedfrom rest. The spring can be considered elastic and has a constant of k = 10 lb/in. Thespring is not adhered to the collar, and can be considered massless, so it will notextend into tension. Plot the acceleration of the collar as a function of x for x = 0 to 7 inches.What is the velocity as the collar leaves the spring?
The collar has a mass of 2 kg and is attached to the light spring, which has a stiffness of 30 N∕m and an unstretched length of 1.5 m. The collar is released from rest at A and slides up the smooth rod under the action of the constant 50-N force. Calculate the velocity v of the collar as it passes position B. Use
A 4-lb collar can slide without friction along a horizontal rod and is released from rest at A . The undeformed lengths of springs BA and CA are 10 in. and 9 in., respectively, and the constant of each spring is 2800 lb/in. Determine the velocity of the collar when it has moved 1 in. to the right.
A motorcycle and rider have a combined mass of 350kg. The vehicle's velocity is 100 km/hr. The rider is to go up a hill incline of 10 meters. The wheels each have a mass of 20 kg and a diameter of 500mm. The wheel design consists of 6 spokes with a mass of 0.5 kg for each spoke. a. Determine the vehicle's velocity at the top of the hill, assuming it was a rolling vehicle with engine being turned off. a. Indicate the vehicle's velocity at each meter through the climb. b. Explain the transfer energy and how this affects the behaviour of the system. At another point in its journey, the motorcycle and rider travel at 80 km/h around a left-hand bend of radius 30m. Calculate: a) The angular velocity of each wheel. b) The moment of inertia of each wheel. c) The angular momentum of the wheel prior to entering the bend. d) The magnitude of the gyroscopic torque produced on the bike as the rider is driving around the bend. What is the effect and why is it important to calculate the gyroscopic…
The uniform slender rod (6.7 kg) is pinned at point O. If a 7.6-g bullet shoots into the rod with a speed of 640 m/s and becomes embedded in it, determine the total angular momentum H (in kg•m²/s) about point O immediately after that. The rod and the bullet are considered one system. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². G 0.2 m ↓ Your Answer: 1 m Answer
Dynamics of Rigid Bodies. Please answer in clear and complete solution
The double pulley shown in the figure is formed by two wheels that are coupled to each other. The complete pulley (formed by the two wheels) has a mass of 15 kg and a turning radius of 110mm. Block A has a mass of 40 kg. If a force of 2 kN is applied to the tied rope of the inner pulley wheel, determine the speed of block A after 3 seconds. At the beginning, the whole system was at rest. Disregard the mass of the string and consider that the moment of inertia (kg.m²) of the complete pulley is given by IP = mko²where m is the mass of the pulley and Ko is the radiusspinning
The collar with mass of 0.7 kg is released from rest at position A and travels down the smooth circular rod in the vertical plane. If the velocity of the collar at Point C is 3.3 m, determine the tangential component of acceleration of the collar (in m) at Point C. The spring has a stiffness of k = 140 N and an unstretched length of 0.5 meters. Consider R = 1.7 meters, 0 = 33°, and g =10 A m R/2 D В R
The uniform slender rod (7.1 kg) is pinned at point O. If a 5.4-g bullet shoots into the rod with a speed of 660 m/s and becomes embedded in it, determine the total angular momentum H (in kg.m²/s) about point O immediately after that. The rod and the bullet are considered one system. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². G1m 0.2 m
The homogeneous sphere with mass m is held 1 m above the horizontal plane and rotates with an angular velocity of 30 rad/s clockwise. The sphere is then released and falls impacting the ground below at A. Determine the velocity of the centre of mass of the sphere after it bounces. Assume the ground is rough so no slipping occurs, and the coefficient of restitution is 0.9. Solve all questions using Impulse and Momentum methods
Part A The system is released from rest at 0= 0° when a constant couple moment M = 100 N·m is applied. (Figure 1) If mass of the cable and links AB and BC can be neglected, and each pulley can be treated as a disk having a mass of 6 kg, determine the speed of the 20-kg block at the instant link AB has rotated 0-90°. Note that point C moves along the vertical guide. Also, the cable does not slip on the pulleys. Express your answer to three significant figures and include the appropriate units. HÅ 1" UP 3.23 A C EWC ? m S Submit Previous Answers Request Answer X Incorrect: Try Again: 4 attempts remaining 50 mm F 200 mm BO E 100 mm V 0 -50 mm D M 100 Nm A