Q3: A steam power plant operates on the reheat regenerative Rankine cycle with a closed feedwater heater. Steam enters the turbine at 12.5 MPa and 550°C at a rate of 24 kg/s and is condensed in the condenser at a pressure of 20 kPa. Steam is reheated at 5 MPa to 550°C. Some steam is extracted from the low-pressure turbine at 1.0 MPa, is completely condensed in the closed feedwater heater, and pumped to 12.5 MPa before it mixes with the feedwater at the same pressure. Assuming an isentropic efficiency of 88 percent for both the turbine and the pump, determine (a) the temperature of the steam at the inlet of the closed feedwater heater, (b) the mass flow rate of the steam extracted from the turbine for the closed feedwater heater, (c) the net power output, and (d) the thermal efficiency.

Q3: A steam power plant operates on the reheat regenerative Rankine cycle with a closed feedwater heater. Steam enters the turbine at 12.5 MPa and 550°C at a rate of 24 kg/s and is condensed in the condenser at a pressure of 20 kPa. Steam is reheated at 5 MPa to 550°C. Some steam is extracted from the low-pressure turbine at 1.0 MPa, is completely condensed in the closed feedwater heater, and pumped to 12.5 MPa before it mixes with the feedwater at the same pressure. Assuming an isentropic efficiency of 88 percent for both the turbine and the pump, determine (a) the temperature of the steam at the inlet of the closed feedwater heater, (b) the mass flow rate of the steam extracted from the turbine for the closed feedwater heater, (c) the net power output, and (d) the thermal efficiency.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

B- Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 3 MPa and 350 °C and is condensed in the condenser at a pressure of 75 kPa. Determine the thermal efficiency of this cycle.
This is an Open feedwater not a closed feedwater thank you
A steady-state system for producing power consist of a pump, heat exchanger and a turbine. Watersteam power plant operates on an ideal reheat– regenerative Rankine cycle. Steam enters the highpressure turbine at 10 MPa and 550°C and leaves at 0.8 MPa. Some steam is extracted at thispressure to heat the feedwater in an open feedwater heater. The rest of the steam is reheated to500°C and is expanded in the low-pressure turbine to the condenser pressure of 10 kPa. Determinethe entropy generation associated with the reheating and regeneration processes. Assume a sourcetemperature of 1800 K. please i so another solution for this qustion and they didn't do any calculation for state 4 can i know why?
Q4: Consider a steam power plant that operates on an ideal reheat- regenerative Rankine cycle with one open feedwater heater, one closed feedwater heater, and one reheater. Steam enters the turbine at 15 MPa and 600°C and is condensed in the condenser at a pressure of 10 kPa. Some steam is extracted from the turbine at 4 MPa for the closed feedwater heater, and the remaining steam is reheated at the same pressure to 600°C. The extracted steam is completely condensed in the heater and is pumped to 15 MPa before it mixes with the feedwater at the same pressure. Steam for the open feedwater heater is extracted from the low-pressure turbine at a pressure of 0.5 MPa. Determine the fractions of steam extracted from the turbine as well as the thermal efficiency of the cycle. 1 kg 15 MPa 600°C Boiler 15 MPa 4 MPa 0.5 MPa 10 kPa Mixing chamber (0) Reheater Closed FWH www Pump III 4 MPa High-P turbine 10 P₁0 P₁1=4 MPa 600°C 2 12 1-y (11) 0.5 MPa Open FWH Low-P turbine Pump II Pump I 1-y-z 13 10…
A steam power plant operates on an ideal regenerative Rankine cycle. Steam enters the turbineat 6 MPa and 450 o C and is condensed in the condenser at 20 kPa. Steam is extracted from theturbine at 0.6 MPa to heat the feedwater in an open feedwater heater. Water leaves thefeedwater heater as a saturated liquid. The mass flow rate of steam through the boiler is 6 kg/s. Show the cycle on a T-s diagram and determine (a) thenet work per kilogram of steam flowing through the boiler and (b) the thermal efficiency of thecycle. (c) The quality of steam leaving the turbine (d) The fraction of steam extracted from the turbine
An ideal Rankine cycle with one stage of reheat utilizes steam as working medium. Boiler pressure is 4 MPa, the boiler exit temperature is 400°C, and the condenser pressure is 10 kPa. The reheat takes place at 0.4 MPa and the steam leaves the reheater at 400°C. (Enthalpies are in KJ/kg.). Determine the thermal efficiency of the cycle. Determine also the thermal efficiency if there is no reheater. Without the reheater, the thermal efficiency is: Select one: O a. 35.29% O b. 32.95% O c. 34.51% O d. 33.15%
Please show the solution. Thank you very mmuch
A steady-state system for producing power consist of a pump, heat exchanger and a turbine. Watersteam power plant operates on an ideal reheat– regenerative Rankine cycle. Steam enters the highpressure turbine at 10 MPa and 550°C and leaves at 0.8 MPa. Some steam is extracted at thispressure to heat the feedwater in an open feedwater heater. The rest of the steam is reheated to500°C and is expanded in the low-pressure turbine to the condenser pressure of 10 kPa. Determinethe entropy generation associated with the reheating and regeneration processes. Assume a sourcetemperature of 1800 K. Please Solve step by step.
Scenario (1) The first steam power plant operates on an ideal reheat Rankine cycle. Steam enters the first turbine at 8 MPa and 500 C and leaves at 3 MPa. Steam is then reheated at a constant pressure to 500 C before it expands to 20 kPa in the low-pressure turbine. Assuming that heat is being added to the boiler from a high temperature source at 1800 K and the condenser is transferring heat to a temperature sink at 300 K. Task 1 Investigate the effect of changing pump efficiency on the overall thermal efficiency of the thermodynamics cycle (Hint: You will assume different values for the isentropic pump efficiency such as: 70%, 80%, 90%, 95%, and 100%, then observe how it will change the thermal efficiency of the cycle). Representing the results in a plot is recommended.
Scenario (1) The first steam power plant operates on an ideal reheat Rankine cycle. Steam enters the first turbine at 8 MPa and 500 C and leaves at 3 MPa. Steam is then reheated at a constant pressure to 500 C before it expands to 20 kPa in the low-pressure turbine. Assuming that heat is being added to the boiler from a high temperature source at 1800 K and the condenser is transferring heat to a temperature sink at 300 K. Task 1 Investigate the effect of changing turbine efficiency on the overall thermal efficiency of the thermodynamic cycle. (Hint: You will assume different values for the isentropic turbine efficiency such as: 70%, 80%, 90%, 95%, and 100%, then observe how it will change the thermal efficiency of the cycle). Representing the results in a plot is recommended.
An ideal Rankine cycle with one stage of reheat utilizes steam as working medium. Boiler pressure is 4 MPa, the boiler exit temperature is 400°C, and the condenser pressure is 10 kPa. The reheat takes place at 0.4 MPa and the steam leaves the reheater at 400°C. (Enthalpies are in KJ/kg.). Determine the thermal efficiency of the cycle. Determine also the thermal efficiency if there is no reheater. The thermal efficiency is: Select one: O a. 35.60% O b. 36.73% O c. 37.50% O d. 33.75%
An ideal Rankine cycle with one stage of reheat utilizes steam as working medium. Boiler pressure is 4 MPa, the boiler exit temperature is 400°C, and the condenser pressure is 10 kPa. The reheat takes place at 0.4 MPa and the steam leaves the reheater at 400°C. (Enthalpies are in KJ/kg.). Determine the thermal efficiency of the cycle. Determine also the thermal efficiency if there is no reheater. The quality at the exhaust of the low pressure turbine is: Select one: O a. 13% O b. 97% O c. 3% O d. 87%