Q14) An air-conditioner with refrigerant-134a as the working fluid is used to keep a room at 26°C by rejecting the waste heat to the outdoor air at 34°C. The room gains heat through the walls and the windows at a rate of 250 kJ/min while the heat generated by the computer, TV, and lights amounts to 900 W. The refrigerant enters the compressor at 500 kPa as a saturated vapor at a rate of 100 L/min and leaves at 1200 kPa and 50°C. Determine (a) the actual COP,(b) the maximum COP, and (c) the minimum volume flow rate of the refrigerant at the compressor inlet for the same compressor inlet and exit conditions.

Q14) An air-conditioner with refrigerant-134a as the working fluid is used to keep a room at 26°C by rejecting the waste heat to the outdoor air at 34°C. The room gains heat through the walls and the windows at a rate of 250 kJ/min while the heat generated by the computer, TV, and lights amounts to 900 W. The refrigerant enters the compressor at 500 kPa as a saturated vapor at a rate of 100 L/min and leaves at 1200 kPa and 50°C. Determine (a) the actual COP,(b) the maximum COP, and (c) the minimum volume flow rate of the refrigerant at the compressor inlet for the same compressor inlet and exit conditions.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 35°C at a rate of 0.018 kg/s and leaves at 800 kPa as a saturated liquid. The compressor consumes 1.24 kW of power. Use data from the tables. 800 kPa x=0 Jo Expansion valve 19H Condenser Evaporator QL Compressor 800 kPa 35°C Determine the rate of heat absorption from the outside air. The rate of heat absorbed from the outside air is W₁ kW.
PROBLEM: A flashed-steam geothermal power plant is located where underground hot water is available as saturated liquid at 715 kPa, The well head pressure is 680 kPa. The flashed steam enters a turbine at 635 kPa and expands to 15 kPa, when it is condensed. The flow rate from the well is 35.3 kg/s. Determine: Draw the T-S diagram The mass flow rate of steam in kg/s The power produce in KW The cooling water flow in kg/s if water is available at 25 oC and a 15°C rise is allowed through the condenser.
750 kPa 800 kPa 55°C Condenser (3) Expansion valve Compressor Evaporator Figure 3 4. The liquid leaving the condenser of a 30 kW heat pump using refrigerant 134a as the working fluid is subcooled by 5.4°C. The condenser operates at 1 MPa and the evaporator at 0.4 MPa. How does this subcooling change the power required to drive the compressor as compared to an ideal vapour-compression refrigeration cycle? (3.41 kW, 3.25 kW)
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.28 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of 420 W from the surroundings. The heat exchanger loses no heat to the environment. 26°C 42°C Condenser Expansion valve Evaporator OL Water 18°C 1.2 MPa 65°C Oin W in Compressor 60 kPa -34°C Determine the COP of the refrigerator. (You must provide an answer before moving on to the next part.) The COP of the refrigerator is 1.824 >
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.28 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of 420 W from the surroundings. The heat exchanger loses no heat to the environment. 26°C 42°C ↑ 4 Condenser Expansion valve Evaporator QL Water 18°C 1.2 MPa 65°C ↑gin Win Compressor 60 kPa -34°C Determine the theoretical maximum refrigeration load for the same power input to the compressor. The theoretical maximum refrigeration load for the same power input to the compressor is KW.
Q1.2 Consider a two-stage compression refrigeration system operating between the pressure limits of 0.8and0.14 MPa(see Fig. Q 2). The working fluid isrefrigerant -134a. The refrigerant leaves thecondenser as a saturated liquid and is throttled to aflash chamberoperating at0.4 MPa. Part ofthe refrigerant evaporates during this flashing process, and this vapour is mixed with the refrigerantleaving the low-pressure compressor. The mixture is then compressed to the condenser pressure bythe high-pressure compressor. The liquid in the flash chamber is throttled to the evaporator pressure,and it cools the refrigerated space as it vaporizes in the evaporator. Assuming the refrigerant leavesthe evaporator as saturated vapor and both compressors are isentropic, determine(a) the coefficient of performance (COP).Re-draw the schematic diagram and sketch the cycle accurately on a T-s diagram with the propertyvalues labelled at all state points.
A heat pump cycle using water as the working fluid consists of a compressor, a condenser, an expansion valve, and an evaporator. Saturated vapor with mass flow rate of 1 kg/s at 0.5 MPa (state 1) enters the condenser and leaves it as saturated liquid at the same pressure (state 2). The pressure in the evaporator is 0.01 MPa. The condenser and the evaporator processes are isobaric. The compressor is adiabatic and reversible. The valve is adiabatic. A. List all the known information and assumptions. B. Determine the heat output of the condenser (QH) C. Determine the heat input of the evaporator(Qc) D. Determine the coefficient of performance of the heat pump. E. Determine the coefficient of performance of a Carnot heat pump running between the same temperatures TH and TC at the evaporator and condenser. F. Calculate the entropy generation in the compressor. G. Draw the TS diagram for the cycle on paper. (Hint: you must calculate T1, T2, T3, T4, h1, h2, h3, h4, s1, s2, s3, s4, and draw…
Condenser a steam power plant that operates on a simple ideal ranking cycle and has a net power output of 22MW. Steam enters the turbine at 7Mpa and 450.05°C and is cooled in the condenser at a pressure of 10kpa by running cooling water from a lake through the tubes of the condenser at rate of 1750 kg/s. Determine the mess flow rates of steam through the steam turbine assuming that the cp of superheated steam is 2.9593kJ/kg.K.
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.28 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of 420 W from the surroundings. The heat exchanger loses no heat to the environment. 26°C 42°C Expansion valve 4 Condenser ↓ Evaporator Water 18°C QL 1.2 MPa 65°C Qin W in Compressor 60 kPa -34°C Determine the quality of the refrigerant at the evaporator inlet. (Take the required values from saturated refrigerant-134a tables.) (You must provide an answer before moving on to the next part.) The quality of the refrigerant at the evaporator inlet is
1. Below is a schematic diagram of a simple steam power plant.Steam is heated inside an isobaric boiler and enters the turbine at 1 MPa and 300°C. It exits the turbine at 500 kPa, saturated vapor. The steam is then cooled down to saturated liquid at 500 kPa by cooling water flowing in at 35 °c and out at 85 °C of the condenser. The needed power of the pump is 11.071 MW. The steam is pumped into a throttling device back to the boiler.The mass flow rate of steam circulating the condenser is 100 kg/s. Determine the following: a. Turbine work in MW b. Heat rejected from the condenser in MW c. Mass flow rate of cooling water in kg/s d. Inlet boiler temperature in °C e. Heat added in the boiler in MW Qboiler Isobaric Boiler P1= 1MPA T1= 300°C Wpump=11.071 MW Wturbine Condenser P2= 500 kPa P2= 500 kPa Saturated Saturated Liquid Vapor T2,cw = 85°C T1,cw = 35°C Qcondenser m2 =100 kg/s Turbine EPump
Question 3 In a vapour-compression refrigeration system, refrigerant - 134a enters the compressor superheated at 200 kPa and - 5 °C. The refrigerant enters the condenser at 1.4 MPa and 75 °C, and exits at 1.4 MPa as a saturated liquid. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 105 kW, represent the cycle on a T-s diagram and determine: a) the mass flow rate of the refrigerant in kg/s, b) the power input to the compressor in kW, c) the coefficient of performance, and (2) d) the isentropic compressor efficiency