Answered: is the lathe operation, which is…

is the lathe operation, which is performed without the cutting tool moving perpendicular to the axis of workpiece. Grooving Operation Knurling Parting-Off Facing

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter5: Turning

Section5.5: Taper Turning

Problem 8RQ: What must be known to use the compound-rest taper turning method?

See similar textbooks

Related questions

Q: In a multi point cutting tool the negative rake angle is used for high tensile strength materials.…

A: In multipoint cutting tools, the angle of the rake surface from the reference plane that is normal…

Q: From the speed chart below, determine the correct cutting speed for facing a 2 in. diameter Cast…

Q: The advantage of an independent chuck is that the work can be centred to high precision. Select one:…

A: True

Q: Which drawing of the spindle assembly is sectioned in accordance with AS 1100?

Q: Name the various ways in which a work-part can be held in a lathe.

A: given: Name the various ways in which a work-part can be held in a lathe.

Concept explainers

Automation in manufacturing processes

The term automation refers to the technique through which the creation of an apparatus takes place using an automatic process or a system. Let us try to understand this with an example.

Question

is the lathe operation, which is performed without the cutting tool
moving perpendicular to the axis of workpiece.
Grooving Operation
Knurling
Parting-Off
O Facing

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The end of a large tubular workpart is to be faced on a NC vertical boring mill. The part has an outside diameter of 38.0 in and an inside diameter of 24.0 in. If the facing operation is performed at a rotational speed of 40.0 rev/min, feed of 0.015 in/rev, and depth of cut of 0.180 in, determine (a) the cutting time to complete the facing operation and the cutting speeds and metal removal rates at the beginning and end of the cut.
A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an initial length of 154 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii) During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Total time required to complete the turning operation is 59.6 minutes
A Ø2.0" piece of alloy steel needs to be turned in a lathe using a carbide cutting tool. The surface speed is 425 ft/min and the chip load is .008 in/rev. What is the recommended feed for the turning operation above? O .008 in/rev O .008 in/min O 6.8 in/rev O 425 in/min O 6.8 in/min
Question 1. The shaping machine is used to machine flat metal surfaces especially where a large amount of metal has to be removed. The shaper machine is a reciprocating type of machine basically used for producing the horizontal, vertical or flat surfaces. The shaper holds the single point cutting tool in ram and workpiece is fixed in the table. A shaper mechanism is designed to give a slow cutting stroke and a quick return to a blade attached to the slider at C. Determine the velocity of the slider block C at the instant 0= 60°, if link AB is rotating at 4 rad/s. 125 mm C 45 B WAR =4 rad/s 300 mm
Please need within 30 min Thank you.
A twin-spindle drill simultaneously drills one ½-in hole and one ¾" through a 1" wide work piece. Both holes are twist drill with 118° point angles. cutting speed for material is 230 ft/min. The rotation speed of each spindle can be configured individually. The feed rate of both holes must be set to the same value, since both spindles go down at the same speed. The forward speed is set in such a way that the speed total metal removal does not exceed 1.50 in3 /min. Determine: a) the velocity maximum feedrate (in/min) that can be used, b) the individual feedrates (in/rev) that result in each hole and c) the time required to drill the holes.
A turning operation is performed on a cylindrical work part whose diameter = 150 mm and length = 500 mm. Cutting speed = 3.0 m/s, feed = 0.3 mm/rev, and depth of cut = 2 mm. Determine: a. the cutting time and, b. the material removal rate. Equations used Tm= TD.L fv
A mild steel specimen of Initial diameter of 30.5 mm is turned to final diameter of 27 mm for an initial length of 153 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii)During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Time required to complete one single turning operation is 3.5 minutes (a)Find number of passes to finish the entire turning operation (b) Total time required to complete the turning operation in minutes
1. A workpiece with 25mm diameter is turned in a centre lathe with a back rake angle of 12 degrees and front relief angle 7 degrees. Calculate the actual cutting angles (rake angle and clearance angle) if the cutting tool is set (a) 0.8mm above the centre line of the work piece, and (b) 0.8mm below the centre line of the work piece. Rake angle h End clearance angle Figure. Tool setting errors
Solve the encircled blanks
Name the various ways in which a work-part can be held in a lathe.
What must be known to use the compound-rest taper turning method?