In a batch-production machining operation, the batch quantity = 65 parts. Part handling time each cycle = 2.5 min, and machining time per part = 3.44 min. It takes 75 min to set up the machine for production. Tool change time = 3.0 min. tool must be changed every 18 parts. Availability of the machine tool = 98%, and the scrap rate= 0. Determine: (a) production rate (b) How many hours are required to complete the batch? WRITE YOUR ANSWERS HE b) ******

In a batch-production machining operation, the batch quantity = 65 parts. Part handling time each cycle = 2.5 min, and machining time per part = 3.44 min. It takes 75 min to set up the machine for production. Tool change time = 3.0 min. tool must be changed every 18 parts. Availability of the machine tool = 98%, and the scrap rate= 0. Determine: (a) production rate (b) How many hours are required to complete the batch? WRITE YOUR ANSWERS HE b) ******

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a milling process, where a pocket with width (X) of 400mm, Length (Y) 300mm, and depth (z) of 15 mm. The cutting tool is a 12 mm diameter flat end mill with 4 cutting edges. For some reason, the tool can be radially immersed in the material at most 50% of the tool diameter. The spindle speed is selected as 2000 rpm, where the max allowable axial cutting depth is 2.5 mm. a) Calculate the number of total cutting steps, indicating which feed direction would you prefer x or y. It may be preferred to have feed rate can be along X direction Total # of cutting steps: If feed direction is along X, the total number of cutting steps is 294 b) Calculate the minimum achievable cycle time if the feed rate is 0.15 mm/rev/tooth. Approx cycle time: 98 minutes
Please typing answer only IENG 302 - Manufacturing Processes: We are reducing the diameter of a 95.8 mm cylinder to 30.04 mm using 7 roughing passes and 3 finishing passes. The finishing operations use a depth of cut of 1.51 mm. The roughing operations are performed with a feed rate of 9.61 mm/s and the finishing operation is performed with a feed rate of 11.31 mm/s. a) What is the depth of cut for a roughing pass? b) What is the rate of material removal (mm^3/s) for the third roughing pass? c) What is the rate of material removal (mm^3/s) for the final finishing pass? d) What is the average rate of material removal (mm^3/s) for the roughing operations?
operation, the shear IS cIose to, In turning operation, spindle speed is set to provide a cutting speed of 2.2 m/: The feed and depth of cut are 0.32 mm and 2.1 mm, respectively. The tool rake angle is 15°. After the cut, the deformed chip thickness is measured to be 0.43 mm. Using the Orthogonal model as an approximation of turning operation, the shear strain is close to, In turning operation, spindle speed is set to provide a cutting speed of 2.4 m/
4) Tool Life: A HSS tool has been used for a metal cutting operation shows a Taylor relationship of VT0.125-44.5. Originally 15 minutes were required to remove a dull tool. A new tool holder has made it possible to reduce the time to 5 minutes. What increase in cutting speed does this permit to obtain the maximum rate of production from the operation?
Conventional lathe and a CNC lathe are under consideration for machining a given part, data shown
A certain job shop specializes in one-of-a-kind orders dealing with parts of medium-to-high complexity. A typical part is processed sequentially through 10 machines in batch sizes of 1. The shop contains a total of eight conventional machine tools and operates 40 hr/wk of pro duction time. Average time values on each part per machine are: machining time = 0.5 hr, work handling time = 0.3 hr, tool change time = 0.2 hr, setup time = 3 hr, and non operation time = 12 hr. A new programmable machine is being considered that can per form all 10 operations in a single setup. The programming of the machine for this part will require 20 hr; however, the programming can be done off-line, without tying up the machine. Setup time will be just 2 hr because simpler fixtures will be used. Total machining time will be reduced to 80% of its previous value due to advanced tool control algorithms; work han dling time will be the same as for one machine; and total tool change time will be reduced by…
I need the answer as soon as possible
Solve the question below- except that availability = 95%. In a sequential batch machining operation, setup time is 1.5 hours, and the batch size is 120 units. The cycle time consists of part handling time of 30 sec and processing time of 2.85 min. One part is produced each cycle. Tool changes must be performed every 10 parts, and this takes 2.0 min. Determine the average production rate. O O
Question 2: The cost of a machine is 6200 S and scrape value is 130 S. The maintenance costs found from experience are follow. When should the machine be replaced? 3 Year Cost of 4 550 8 2000 1 2 150 300 410 960 1350 1850 maintenance
Fast please
Q1:- Put a mark of True or false for below:- (a):- The milling cutting tool has a single cutting edge? (b):- At the break-even point, the total revenue equals the total cost? (c):- The right-hand rule is used to define machine axes? (d):- Design error is a simple mistake? (e):- The quality of products is poor in mass production? (f):- Allowances must be left before turning? (g):- Up-ward milling is better than down-ward milling?
Standard time & work sampling The following data resulted from a time study made on a horizontal milling machine: Mean manual effort time per cycle: 4.62 min Mean cutting time (power feed): 3.74 min Mean performance rating: 115 percent Machine allowance (power feed): 10 percent Fatigue allowance: 15 percent questions: 1.) What is the Basic Time for the manual effort? 2.) What is the Standard Time for the manual effort? 3.) What is the Standard Time for the machine?