i. A sandstone core sample is saturated 100% with water. Calculate the absolute permeability of the core sample if the water is flowing at 6.21 cubic centimetres per second. The length of the core sample is 14 centimetres and its diameters is 6 centimetres. The pressure differential across the core sample is 15 atmospheric pressure and the water viscosity is 1.2 centipoises.

i. A sandstone core sample is saturated 100% with water. Calculate the absolute permeability of the core sample if the water is flowing at 6.21 cubic centimetres per second. The length of the core sample is 14 centimetres and its diameters is 6 centimetres. The pressure differential across the core sample is 15 atmospheric pressure and the water viscosity is 1.2 centipoises.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.16P

See similar textbooks

Similar questions

A limestone core sample is saturated 100% with water. Calculate the absolute permeability of the core sample if the water is flowing at 4.15 cubic centimetres per second. The length of the core sample is 13.61 centimetres and its diameters if 7.13 centimetres. The pressure differential across the core sample is 25 atmospheric pressure and the water viscosity is 1.1 centipoises. Explain a method of how the permeability of this reservoir can be improved.
Determine the following: a) depth of water in the test well is ______ m b) Transmissbility of the impermeable layer is _____ sq.m/s c) Permeability of the aquifer is ____ m/s
Determine the equivalent liquid permeability for a core sample taken from a sandstone formation. Nitrogen was used to obtain the following data
The hydraulic conductivity of a sand at a void ratio of 0.62 is0.03 cm/sec. Estimate its hydraulic conductivity at a void ratioof 0.48.
The figure shows a cross section through the strata underlying a site of which the permeability properties are of importance. Assume the coefficient of permeability in the horizontal and vertical directions to be the same in each stratum. (each layer is hydraulically isotropic). Estimate the ratio of equivalent hydraulic conductivity: kh(eq)/kv(eq) A: h=4.1 m, k=11x10^-4 mm/s B: h=1.49 m, k=69x10^-5 mm/s C: h=1.16 m, k=36x10^-7 mm/s D: h=2.91 m, k=51x10^-10 mm/s
The hydraulic conductivity of a sand at a void ratio of 0.750 is 0.047 cm/s. Estimate the coefficient of permeability at a void ratio of 0.450 1. Using Casagrande equation 2. Using Kozeny-Carman equation
For a laboratory consolidation test on a clay specimen (drained both sides), the following were obtained. Thickness of the clay layer = 25mm o_1 = 200KN/m^2 o'2 = 400KN/m^2 e_1 = 0.73 e_2 = 0.61 Time for 50% consolidation (t_50 = 2.8min: From table U = 50%, Tv = 0.197 %3D Determine the hydraulic conductivity (in cm/sec) of the clay for the loading range.
Calculate the total stress, pore water pressure and effective stress at point A, D, and C. If the groundwater table drops 1 m, calculate the effective stress at point C. Will the effective stress increase or decrease? 6m Dry sand G₂=2.68 e = 0.55 Groundwater table B Saturated sand 13m G₁ = 2.75 e = 0.85 76
Given the following: H1 = 1.5 m H2 = 3.0 m H3 = 2.0 m K1 = 0.001 cm/sec K2 = 0.032 cm/sec K3 = 0.000041 cm/sec 1. Find the effective average permeability of the deposit in the horizontal direction. (in cm/s) 2. Find the effective average permeability of the deposit in the vertical direction. (in cm/s) 3. What is the ratio of the equivalent hydraulic conductivity?
Subject: Soil Mechanics Please provide a solution and a diagram For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. a. 1.081 x 10^-3 b. 2.56 x 10^-2 c. 1.31 x 10^-7 d. 1.23 x10 ^-5
Solve correct
Qs. The difference between the free water levels in two wells 48 m part in an aquifer is 0.6m. It took an interval of 8 hours between detecting the traces of a tracer material at the two wells in succession. The porosity of the aquifer is 25%. The coefficient of permeability of the aquifer is_______ cm/sec.please dont solve wrong