For the Figure shown, answer the following three questionsOxygen is first at a pressure of 250 kpa and 300 C, piston mass and diameter are 35 kg.and 0.1 m respectively and initially pushes against stops. The outside atmosphere is at 30C and 100 kpa The cylinder is cooled to ambient temperature as heat is transferred to thesurroundings7- the temperature when the piston start moving down isа. 56 Сb. 200 Cc. 27.5 Cd. 30 CAir25 сm8- The pressure of the gas when the temperature reaches ambient isa. 203.2 kpab. 131.2 kpac. 143.7 kpad. 250 kpa9- The distance that the piston dropped when the temperature reaches ambient isa. 0.53 cmb. 2.04 cmc. 0.64 cmс.d. 5.3 cm10- Distillation columns are part ofa. fuel cellsb. commercial refrigeration cyclesc. steam power plantsd. air separation plants

“Since you have asked multiple questions, we will solve the first question for you. If you want any…

For the Figure shown, answer the following three questions Oxygen is first at a pressure of 250 kpa and 300 C, piston mass and diameter are 35 kg. and 0.1 m respectively and initially pushes against stops. The outside atmosphere is at 30 C and 100 kpa. The cylinder is cooled to ambient temperature as heat is transferred to the surroundings 7- the temperature when the piston start moving down is а. 56 С b. 200 С с. 27.5 С Air d. 30 C 2.

For the Figure shown, answer the following three questions Oxygen is first at a pressure of 250 kpa and 300 C, piston mass and diameter are 35 kg. and 0.1 m respectively and initially pushes against stops. The outside atmosphere is at 30 C and 100 kpa. The cylinder is cooled to ambient temperature as heat is transferred to the surroundings 7- the temperature when the piston start moving down is а. 56 С b. 200 С с. 27.5 С Air d. 30 C 2.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a cylinder of an automobile engine, immediately after combustion the gas is confined to a volume of 53.0 cm³ and has an initial pressure of 3.60 × 106 Pa. The piston moves outward to a final volume of 300 cm³, and the gas expands without energy transfer by heat. (Assume the gas in the engine is diatomic with y 1.40.) (a) What is the final pressure of the gas (in kPa)? = 317.920813906 kPa (b) How much work is done by the gas in expanding (in J)? 238.559389571 J (c) What If? If the engine operates in an ideal Otto cycle and 0.0125 mol of fuel-air mixture is injected into the cylinder during the intake stroke, what are the temperatures (in K) at points A, B, C, and D of the cycle as shown in the figure? P TA TC Adiabatic C processes ΤΑ A B TB То Тр = = = || B V V2 V₁ K K K K K
Water contained in a piston-cylinder assembly undergoes two processes in series (point 1 to point 2 and point 2 to point 3): point 1: T1 = 100°C and P1 = 5bar point 2: 71= 151.9°C and P2 = 5bar and v2 = 0.300 .300 m³ point 3: 73= 200°C and v3 = .300" kg Use the thermodynamic tables A.2, A.3, and A.4 to answer the following questions: For questions 1, 3, and 5 choose from: subcooled water, saturated water, saturated liquid, saturated vapor, superheated vapor 1) What is the thermodynamic state of water at point 1: 2- What is the specific volume of water at point 1: 3) What is the thermodynamic state of water at point 2: 4) What is the quality of water (x) at point 2: 3) What is the thermodynamic state of water at point 3: 4) What is the pressure of water at point 3: (bar) On paper draw points 1, 2, and 3 on the following P-v and T-v diagrams and show the two processes. Add number values, units, and constant pressure or temperature lines if needed. Specify which table you used to find…
The 1st law of thermodynamics is ΔU = Q –W. Use this statement of the 1st law to show (mathematically) its equivalent statement: “Total energy of the universe is constant”. Here, the universe can be defined as: system + surroundings (everything but the system –everything outside the system). (Hint: this can be shown by two ways-you may either treat system and surroundings as two systems next to each other, or you may treat system + surroundings (universe) as one system.)
This question requires the use of the extracts from the tables of thermodynamic properties supplied. Ammonia, NH3, was once a commonly used refrigerant. In a particular (very old) refrigeration plant, ammonia has a pressure of 2.9 bar and a temperature of 40 °C. What would be the specific enthalpy of the ammonia under these conditions. О а. 1622 kJ/kg O b. 1552 kJ/kg O c. 1665 kJ/kg O d. 1433 kJ/kg О е. 135 kJ/kg
Assume the following: ●In a light water reactor, approximately 1.0kg of spent nuclear fuel is produced for every50. megawatt-days (MWd) of thermal energy input. ●For the purposes of this analysis, assume the spent nuclear fuel produced is 1.8% Pu-240by mass. Pu-240 has a half-life of 6,430 years. ●The thermal efficiency of the power plant is 38% ●Use equation for radioactive decay: Qt= Q0^e-kt where: ○Qt = quantity of radioactive material at time t ○Q0 = original quantity of radioactive material ○k = the decay constant ○t = time interval in years ○The decay constant k is defined by the relation: Half life = ln(2)/k Diablo Canyon stores 95% of its spent nuclear fuel onsite. ii) How many metric tons of Pu-240 in the spent fuel will still be onsite in that year?
The traditional method of measuring blood pressure uses asphygmomanometer , fi rst recording the highest ( systolic )and then the lowest ( diastolic ) pressure from which fl owing“Korotkoff” sounds can be heard. Patients with dangeroushypertension can exhibit systolic pressures as high as5 lbf/in 2 . Normal levels, however, are 2.7 and 1.7 lbf/in 2 ,respectively, for systolic and diastolic pressures. Themanometer uses mercury and air as fl uids.( a ) How high in cm should the manometer tube be?( b ) Express normal systolic and diastolic blood pressure inmillimeters of mercury.
This question requires the use of the extracts from the tables of thermodynamic properties supplied. Ammonia, NH3, was once a commonly used refrigerant. In a particular (very old) refrigeration plant, ammonia has a pressure of 2.9 bar and a temperature of 40 °C. What would be the specific enthalpy of the ammonia under these conditions. 1433 kJ/kg a. b. 1552 kJ/kg 135 kJ/kg O d. 1622 kJ/kg O e. 1665 kJ/kg
Fluid mechanics The piston-cylinder unit contains a large amount of 20 atm and 0.04 m² of liquid. The liquid expands reversibly according to the law pv' = Cuntil its volume reaches twice its initial value. The liquid is then cooled again under constant pressure until the piston returns to its starting position. Now heat is applied reversibly while the piston is blocked until the pressure rises to the initial value of 20 atmospheres. Calculate the network formed by the liquid. Assume liquid means fluid
Anideal gas with a mass of 2 kg reversibly and polytropically expands up to 3 times its initial volume in a piston-cylinder assem bly. The temperature of the ideal gas drops from 300° Cto 60° C. (a) If the heat energy inputis 20 kJand the boundary work output is 100 kJ, the specificheats of the gas cv [kJ/ kgK] and find the cp [kJ/ kgK] values. (b) If the heat energy output is 20 kJand the boundary work output is 100 kJ, the specificheats of the gas cv [kJ/ kgK] (c) Find the value k, which is the ratio of specificheats. (d) If the heat energy input is 20 kJ, the boundary work output is 100 kJ and the entropy generation is 0.36 kJ/K, then the thermal energy Calculate the source tem perature as [° C].
An air-conditioning system made up of a compressor and heat exchanger is shown in the figure below. This system is operating at steady-state with air flowing through the heat exchanger while the refrigerant first flows through a compressor before entering the heat exchanger. The refrigerant and air do not mix in the heat exchanger. Two control volumes are defined in the figure and both of these control volumes are to be used to answer the questions from this problem. Rotating Shaft 3 Compressor Refrigerant 12 I Control volume B wwwwwww wwwww Heat Exchanger 1 1 I 5 Air Control _' volume A The air enters the heat exchanger (inlet marked 1 in the figure) at a temperature of -13 °C, volumetric flow rate of 0.03 m³/min, and pressure of 101 kPa. Upon exiting the heat exchanger, the air is at a temperature of 42 °C (outlet marked 2 in the figure). The air can be modeled as an ideal gas with gas constant of 287 J/kg.K. The refrigerant enters the compressor (inlet marked 3 in the figure) at a…
Question 11 A 4 stroke gasoline reciprocating internal combustion engine operating stoichiometrically in an environment at standard temperature and pressure consumes 0.8 kilograms of fuel per hour and it has a displacement of 0.77 litres. The engine speed is 2,714 revolutions per minute. Assume the ambient air density is 1.2 kg/m3. What is the volumetric efficiency of the engine. Enter your answer as a rounded percentage. e.g., if the volumetric efficiency is 63.6%, enter the number 64.
A gas enters the furnace with the following conditions: P, = 27 psia; V1 = 11.7 cu. feet per pound; U1= 102.6 Btu per pound; V, = 162 feet per second. The substance leaves the system with the following conditions: P2 = 34 psia; V2 = 10.3 cu. feet per pound; U2= 149.0 Btu per pound; V2 = 605 feet per second. Change in elevation are negligible and 10 Btu per pound heat is added to the fluid as it passes through the system. Calculate the work done on or done by the system.