For a metal plate (k = 50 W/m°C and a = 0.000030 m^2 / s) that is at a uniform initial temperature of 90 °C, and which is exposed to a current of air at 20°C with a heat transfer coefficient of 210 W/ m2°C on the surface, determine the temperature at the surface and at a depth of 10 cm after 3 minutes of exposure. Assume a semi-infinite surface, one- dimensional conduction, and constant thermophysical properties

For a metal plate (k = 50 W/m°C and a = 0.000030 m^2 / s) that is at a uniform initial temperature of 90 °C, and which is exposed to a current of air at 20°C with a heat transfer coefficient of 210 W/ m2°C on the surface, determine the temperature at the surface and at a depth of 10 cm after 3 minutes of exposure. Assume a semi-infinite surface, one- dimensional conduction, and constant thermophysical properties

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 1-in Sch 40 stainless steel pipe with a thermal conductivity of 45 W/m-K can move 1,000 kg of saturated steam per hour at 150 °C. Refractory material 0.25 inches thick with a thermal conductivity of 0.025 W/m-K insulates the pipe. At a temperature of 25 °C, the pipe is exposed to the outside air. There is a 1135 W/m2 internal heat transfer coefficient.40 W/m2-K is the outside heat transfer coefficient, whereas -K. Suppose that only the radial direction is involved in steady-state heat transfer and that radiation effects are negligible. ✓ Determine how much heat is being lost through these pipes to the environment.a. 399.1 W/mb. 1525.0 W/mc. 618.4 W/md. 1128.7 W/me. none of the above √ How about the insulated pipe's surface temperature?a. 118.5 °Cb. None of the abovec. 101.5 °Cd. 216.3 °Ce. 292.2 °C
700 W/m3 electrical heat is generated in a large plane wall whose one side is insulated while the other side is subjected to convection. The thermal conductivity of the wall is (k W/m.K) and the convection heat transfer coefficient is (h = 17 W/m?K). Determine the location and the value for the maximum temperature and the minimum temperature in the plate for steady one-dimensional heat transfer. Assume T. = 25°C. A=1 m?; L= 25 cm). = 20
Heat is generated inside a solid cylinder (D=30 cm, L=90 cm, k=5 W/m.K ) at q=6x104 W/m2. Determine the surface temperature of the cylinder if it is surrounded with a fluid with Ta=20 oC, and ha=50 W/m2.K). Note that at the surface Qcond=Qconv
The exterior wall of a house is composed of a 20 cm thick layer of ordinary brick (conductivity 0.72 W/m K) and a 2.5 cm layer of plaster (conductivity 0.17 W/m K ) on each side (two layers in total). Other purely conductive resistances can be neglected, such as the layer of paint on both sides of the wall. Assume the outer face of the wall is at 35 °C and the inner face is at 20 °C and fill in the gaps. The magnitude of the heat flux through the wall corresponds to the _________ W/m2 and is perpendicular to the wall ________________(fill in with "outside-in" or "inside-out") of the environment. If the wall has a total area of 300m2, the heat transfer rate corresponds to ___________________
The convection coefficient for a hot a fluid flowing over a cool surface is 150 W/m^2. The fluid temperature is 410 K and the surface is held at 290 K. Determine the heat transfer per unit surface area from the fluid to the surface.
. Consider a large plane wall of thickness L = 0.4 m, thermal conductivity k = 2.3 W/m °C, and surface area A = 20 m². The left side of the wall is maintained at a constant tem- perature of T₁ = 80°C while the right side loses heat by con- vection to the surrounding air at T = 15°C with a heat transfer coefficient of h = 24 W/m². °C. Assuming constant thermal conductivity and no heat generation in the wall, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the wall, (b) obtain a relation for the variation of temperature in the wall by solving the differential equation, and (c) evaluate the rate of heat trans- fer through the wall. Answer: (c) 6030 W
It is measured that a 2-m2 wall has a heat transfer rate of 7200 W. If the thickness of the wall is 0.02-m and the temperature difference on either side of the wall is 60ºC, determine the thermal conductivity in W/m K.
asap
A constant heat flux comes to the x = 0 surface of a plane wall with a thickness of 25 cm and a heat transfer coefficient of 15 W / mK. The plane wall loses heat from the x = L surface by both convection and radiation. The temperature of the x = L surface is 45 ° C, the spreading rate is 0.8, and this surface is exposed to 20 ° C temperature and 15 W / m2K heat convection conditions. Since the temperature of the surfaces surrounding the plane wall is 16 ° C, determine the temperature of the x = 0 surface of the wall.
The thermal conductivity of a solid material can be determined using asetup similar to the one shown in the accompanying figure. The thermocouples are placed at 2.5 cm intervals in the known material (copper alloy, k - 52 w/m.k) and the unknown sample, as shown. The known material is heated on the top by a heating element, and the bottom surface of the sample is cooled by running water through the heat sink shown. Determine the thermal conductivity of the unknown sample for the set of data given in the accompanying table. Assume no heat loss to the surroundings and perfect thermal contact at the common interface of the sample and the copper.