A hollow spherical container with thermal conductivity of 25W / m * K and an inner diameter of 28cm and outer diameter of 30cm is kept at an inner surface temperature of 400K . The spherical container is covered with 2 insulating materials having a thickness of 7cm and 8cm, respectively . The thermal conductivity of two insulating materials is 0.18 W/mK. Determine the conduction transfer rate of the spherical container and the intermediate temperature , if the outermost temperature is 270K. Draw schematic diagram and show your solution,

A hollow spherical container with thermal conductivity of 25W / m * K and an inner diameter of 28cm and outer diameter of 30cm is kept at an inner surface temperature of 400K . The spherical container is covered with 2 insulating materials having a thickness of 7cm and 8cm, respectively . The thermal conductivity of two insulating materials is 0.18 W/mK. Determine the conduction transfer rate of the spherical container and the intermediate temperature , if the outermost temperature is 270K. Draw schematic diagram and show your solution,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a draw batch furnace front made of a 20-mm thick steel plate with a ther- mal conductivity of 25 W/m-K. The furnace is situated in a room with surrounding air temperature of 20 C and an aver- age convection heat transfer coefficient of 10 W/m2-K. If the inside surface of the furnace front is subjected to uniform heat flux of 5 kW/m2 and the outer surface has an emissiv- ity of 0.30, determine the inside surface temperature of the furnace front. I= 20°C Furnace front 4=5kW/m Air, 20 C h= 10 W/m K E=0,30 A= 25 Wim K Page 4.
Consider a furnace (as a plane wall) which has a thickness of 15 cm and a surface area of 1 m?. The inside surface of the furnace wall (the hot left side of the wall) is at temperature T1. The furnace wall is made of brick with thermal conductivity of 1.198 W/m.K. The outside surface of the furnace wall (the right side of the wall) has a surface emissivity of 0.8 and is maintained at T2=101 °C and subject to air at 25 °C with convection heat transfer coefficient of 20 W/m?.K. The surroundings temperature at the outside of the furnace wall is at 25 °C. Required: Draw a clear and consistent schematic of the problem and label the operating conditions on the schematic. Perform systematic analysis, state your assumptions and justify the equation used and determine the following (circle your final answers): (i) The rate of heat transfer by convection (in W); (ii) The rate of heat radiation (in W); (iii) The surface temperature of the furnace wall T1 (in °C); (iv) The rate of conduction heat…
700 W/m3 electrical heat is generated in a large plane wall whose one side is insulated while the other side is subjected to convection. The thermal conductivity of the wall is (k W/m.K) and the convection heat transfer coefficient is (h = 17 W/m?K). Determine the location and the value for the maximum temperature and the minimum temperature in the plate for steady one-dimensional heat transfer. Assume T. = 25°C. A=1 m?; L= 25 cm). = 20
A sphere ( k=204 W/m K) with inner diameter 4 cm and outer diameter of 8 cm . The inside temperature is 100C and the outer temperature 50 C . Calculate the rate of heat transfer
. Consider a large plane wall of thickness L = 0.4 m, thermal conductivity k = 2.3 W/m °C, and surface area A = 20 m². The left side of the wall is maintained at a constant tem- perature of T₁ = 80°C while the right side loses heat by con- vection to the surrounding air at T = 15°C with a heat transfer coefficient of h = 24 W/m². °C. Assuming constant thermal conductivity and no heat generation in the wall, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the wall, (b) obtain a relation for the variation of temperature in the wall by solving the differential equation, and (c) evaluate the rate of heat trans- fer through the wall. Answer: (c) 6030 W
In an experiment to measure the thermal conductivity of a plate of unknown material with area 1 m2 and thickness 0.1m, one of its surfaces is maintained at 100 °C and the other at 20 °C and a heat at the rate of 100 kW was supplied across it. Determine the thermal conductivity of the hot plate. Is the material metallic, non-metallic, or gas/liquid?
An electrical wire with 0.4cm in diameter and 2.5m long extends across a room with 15deg C temperature. Heat is generated in the wire as a result of resistance heating, and the surface of the wire is measured to be 162degC. the voltage drop and electric current along the wire is 60V and 1.64 A, respectively. Determine the convection heat transfer coefficient for the heat transfer between the surface of the wire and the room air. Hint, electric power formula. Round your answer to 2 decimal places.
It is measured that a 2-m2 wall has a heat transfer rate of 7200 W. If the thickness of the wall is 0.02-m and the temperature difference on either side of the wall is 60ºC, determine the thermal conductivity in W/m K.
Consider a wall made of Material A that is 4.5m long, 3.0m high, and 0.22m thick. The interior and exterior design temperatures are Too1 and Too2, respectively, the heat transfer coefficients on the interior and exterior surfaces are 10 and 20W / m2 •C. If insulating material is placed on the inside surface of the wall to maintain the temperature shallow from it to T1. Determine the required thickness of the insulating material.
The outside temperature on a particular winter's day is 0°C. Consider two identical houses, each of external surface area 200 m² and internal temperature 20°C. The walls of the first are constructed of a single layer of brick, of thermal conductivity 1 W m-1 °C-1 and thickness 20 cm. What is the heat flux Q out of this house? What is its rate of heat loss in Watts? The walls of the second house are constructed of two layers of brick, each 10 cm thick, and a layer of insulation, also 10 cm thick. The insulation is made mostly out of air, thermal conductivity 0.01 W m of heat loss from this house? How different would your answer be if you neglected the layers of brick in this calculation? -1 °C-1. what are the heat flux and the rate
Its thickness is 1.18 m, its thermal conductivity is 2.75 W/m.°C and its surface area is 15m2Consider a wide plane wall. Inside of the base plateThere is a uniform heat flux produced on its surface with the help of the resistance wire inside.590 W/m2 on the left surface of the wall at x=0net heat fluxand the temperature on this surface was measured as 590 °C. On the wallassuming that there is no heat generation and that the thermal conductivity is constant;a) The differential equation for continuous one-dimensional heat conduction in the wall, andSet the boundary conditions.b) Solve the differential equation to obtain a relation for the temperature change at the wall.c) Calculate the heat loss rate from the wall.