Phase 1: Addressing the WANS, LANS & VLANSDCEsooGalwayInternetU Servesimuie the irterne10 002)Galway LAN80 hostsGO/O10.00.1/30CorkDCESo/1Nat OutsideBelfastGOODCE ZZ soGO/1200.100.10.64/26Nat InsideLimerick172.31.0.0/23GOOANVLAN VLAN3VLAN99Limerick LAN45 hostsWeb ServerCork VLANSAbout 200 hostsBelfast LAN25 hostsUse the following instructions to complete Phase 1:- Use 172.31.0.0/23 for internal addressing.I Apply /30 subnets on all serial interfaces, using the last available subnet.I Assign an appropriately sized subnet for the Cork LAN, has about 200 devices:VLAN 99: 25 devices (Management VLAN)VLAN 2: 55 hosts (R&D)VLAN 3: 20 hosts (HR)VLAN 4: 100 hosts (Production)- Assign the appropriately sized subnet to the Limerick LAN (45 hosts).Assign an appropriately sized subnet for the Belfast LAN (25 Hosts).I Assign an appropriately sized subnet for the Galway LAN (80 Hosts).- Document the addressing scheme in tables.Addresses will be assigned dynamically to hosts; refer to the DHCP sectiondocument for deils.The

Answered: Image /qna-images/answer/adb361ee-cbcd-42e8-9d50-f00a90e5c3db.jpg

Do fou Phase 1: Addressing the WANS, LANS & VLANS DCE so0 Galway Internet Seve simule rternet 10 0020) Galway LAN 80 hosts S0/0 10.0.0.1/30 s00 Cork DCE S/1 Belfast Nat Outside 200.100.10.64/26 Nat Inside 172.31.0.0/23 GOO DCE ZZ soo GO/1 Limerick Goo VLAN VLAN 99 VLAN Limerick LAN 45 hosts VLAN Web Server Cork VLANS About 200 hosts Beifast LAN 25 hosts Use the following instructions to complete Phase 1: 1 Use 172.31.0.0/23 for internal addressing. I Apply /30 subnets on all serial interfaces, using the last available subnet. 1 Assign an appropriately sized subnet for the Cork LAN, has about 200 devices: VLAN 99: 25 devices (Management VLAN) VLAN 2: 55 hosts (R&D) VLAN 3: 20 hosts (HR) VLAN 4: 100 hosts (Production) I Assign the appropriately sized subnet to the Limerick LAN (45 hosts). Assign an appropriately sized subnet for the Belfast LAN (25 Hosts). I Assign an appropriately sized subnet for the Galway LAN (80 Hosts). Document the addressing scheme in tables. Addresses will be assigned dynamically to hosts; refer to the DHCP section this document for details.

Do fou Phase 1: Addressing the WANS, LANS & VLANS DCE so0 Galway Internet Seve simule rternet 10 0020) Galway LAN 80 hosts S0/0 10.0.0.1/30 s00 Cork DCE S/1 Belfast Nat Outside 200.100.10.64/26 Nat Inside 172.31.0.0/23 GOO DCE ZZ soo GO/1 Limerick Goo VLAN VLAN 99 VLAN Limerick LAN 45 hosts VLAN Web Server Cork VLANS About 200 hosts Beifast LAN 25 hosts Use the following instructions to complete Phase 1: 1 Use 172.31.0.0/23 for internal addressing. I Apply /30 subnets on all serial interfaces, using the last available subnet. 1 Assign an appropriately sized subnet for the Cork LAN, has about 200 devices: VLAN 99: 25 devices (Management VLAN) VLAN 2: 55 hosts (R&D) VLAN 3: 20 hosts (HR) VLAN 4: 100 hosts (Production) I Assign the appropriately sized subnet to the Limerick LAN (45 hosts). Assign an appropriately sized subnet for the Belfast LAN (25 Hosts). I Assign an appropriately sized subnet for the Galway LAN (80 Hosts). Document the addressing scheme in tables. Addresses will be assigned dynamically to hosts; refer to the DHCP section this document for details.

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

Cisco Router Create Topology as below and troubleshoot the problem: 4 Routers 3 switches 3 PCs PC1--> 192.168.1.2 Gateway: 192.168.1.1 PC2--> 192.168.2.2 Gateway: 192.168.2.1 PC1--> 192.168.5.2 Gateway: 192.168.5.1 Router 1: f0/0 : 192.168.1.1 se1/0: 192.168.3.1 se1/1: 192.168.7.2 Router 2: f0/0: Not set se1/0: 192.168.4.1 se1/1: 192.168.3.2 se1/2: 192.168.8.1 Router 3: f0/0: 192.168.2.1 f0/1: 192.168.5.1 se1/0: 192.168.4.2 se1/1: 192.168.6.2 Router 4: f0/0: 192.168.5.1 se1/0: 192.168.6.1 se1/1: 192.168.7.1 se1/2: 192.168.8.2 Please make sure to identify each identified problem separately in plain English and provide the following screenshot as evidence of successful troubleshooting:a. Successful ping between: PC1 <--> PC2b. Successful ping between: PC2 <-->PC3c. Successful ping between: PC3 <-->PC1
Assume the topology below: what is the preferred path that will be used when OSPF routing protocol is used? FE1/0 10.0.1.1/24 100 Mbps 100 Mbps 100 Мbps 10.1.1.0/24 .2 10.1.0.0/24 .2 10.0.0.0/24 10.1.2.1/24 R3 R2 R4 FEO/O FE2/0 10.1.3.1/24 FE1/0 FEO/0 FE1/0 FEO/0 FEO/0 FE1/0 FE3/0 10.0.3.1/24 FE2/0 10.0.2.1/24 10 Mbps 10 Mbps FE2/0 10.1.3.2/24 FE3/0 10.0.3.2/24 R4 > R3 > R2 > R1 R4 > R5 > R1 None of the above Both R4 > R3 > R2 > R1 and R4 > R5 > R1
Question 4 Given below a Point-to-point communication trace taken by Wireshark a network protocol analyzer software. ETHER: Ethernet Header ETHER: Packet 3 arrived at 11:42:27.64 ETHER: Packet size = 64 bytes ETHER: Destination = 8:0:20:18:ba:40 ETHER: Source = aa:0:4:0:1f:c8 ETHER: Ethertype = 0800 (IP) IP: IP Header IP: Version = 4 = 20 bytes IP: Header length IP: Type of service = 0x00 = 0 (precedence) = normal delay 0... = normal throughput = normal reliability IP: х хх. ... IP: ... 0 .... IP: IP: .0.. IP: Total length = 40 bytes = 41980 IP: Identification IP: Flags = 0x4 = do not fragment last fragment 0 bytes IP: .1.. IP: ..0. IP: Fragment offset = IP: Time to live = 63 seconds/hops IP: Protocol = 6 IP: Header checksum = af63 IP: Source address = 163.173.32.65 IP: Destination address = 216.58.207.4 IP: No options ТСP: ----- ТСР Нeader TCP: Source port = 1368 TCP: Destination port = 25 (SMTP) TCP: Sequence number = 143515262 TCP: Acknowledgement number = 3128387273 TCP: Data…
16) a layer 4 connection, what action should a system take if it receives a synchronize packet? Send PSK No Action Send ACK Send CTS
Question text Host A sends out an Ethernet frame with destination address of FF:FF:FF:FF:FF:FF as shown in the diagram below. Which hosts and devices will receive the frame? Router1 Router2 ::::: Host A Switch1 Switch2 Host B Host C Host D Select one or more: a. Host A b. Host B c. Host C d. Host D e. Switch1 f. Switch2 g. Router1 h. Router2 Question 5
8 remind in class, we have discussed an ideal multiple access protocol (in the link layer) should have the following characters: 1. When only one node wants to transmit, it can send at rate R (full speed), and 2. Fully decentralized. Which of the following protocol fulfill these two characters? a. ALOHA b. Polling c. FDMA d. TDMA
I have a Networking question. How to configure these virtual devices to send packets from one network to another through router?
Serial 0/1 Serial 0/0 Fast Ethernet 0/0 None of the above
Concept : Ip adress In the end How it's 255.255. 252 ?
What static routes need to be added to routers A and B for PC communication across the whole topology?
I have this drawing on packet tracer the DNS and the http and ip addresses are added according to what has been written I need help connecting all the devices of the first router to the second router and all the devices of the second router to the first router
QUESTION 3 Select the protocols below that are connection oriented. HDLC IP TCP UDP