Discuss “Contract System” of CNW KPK for civil construction work from inviting of tender to allotment of work
Q: The following table represents the activities of a small construction pro- ject that is required as…
A: Critical Path - It is the longest set of activity or sequence that is carried out to complete the…
Q: A construction contract is an agreement between two or more parties to execute the construction…
A: There are numerous project delivery methods in Malaysia for housing projects. However Traditional…
Q: Which of the following is not a phase of construction project? Select one: a. Tendering b.…
A: Thank you for the question. As per honour code we will answer the first question since exact was not…
Q: In the execution of any project, the contractor's role and responsibility is to: Oa. maintain safety…
A: Explaination : The Contractor has to control the work environment of the project. Contractor makes…
Q: P6.4. What value of 0 is associated with the minimum volume of cable material required to support…
A:
Q: EXPLAIN YOUR ANSWER COMPREHENSIVELY. Mr. Jobert commissioned you to estimate the construction of a…
A: The cost estimate is made before the construction of the work of any project it is generally…
Q: You are the Team Lead of a Consultant building a multi-use facility. The facility consists of 150…
A: There are many methods to be adopted to prepare the bill of quantities and used for valuing work on…
Q: In a circumstances in a private construction where there are any indications that the work done is…
A: Introduction- Construction- It is the process of planning and management of the construction of…
Q: Upon completion of all preliminary stages of a project (design development and detail design), the…
A: Tendering process It is process in construction for submitting scheme to take up the construction…
Q: Salary of foreman in a project is considered as direct labor t or f
A: Given Statement : Salary of foreman in a project is considered as direct labour----
Q: At what conditions can the contractor appeal for a suspension of work?
A: Explanation- Absolutely, the Contractors may suspend or cancel the Contract with fifteen (15) days'…
Q: General Contractors working an a project that requires several months to complete typically request…
A: Solution: The answer is Option G, ALL OF THE ABOVE
Q: Your company, a G7 contractor is appointed as main contractor for construction of a new recreational…
A: Hi there!This question should is opinion based and we cannot provide solution for just…
Q: a type of construction contract and make a brief discussion of its advantages and disadvantages to…
A: A contract protects both the builder and the owner by ensuring that expectations are clear from the…
Q: C. Discuss the consideration provided under construction contracts by a. Client b. Contractor
A: Consideration provide under construction contract under clients- Client is the person who give…
Q: Q1/ Answer by true or false (T or F) of TEN of the following: 1- The main contractor does not need…
A: Some statements regarding contractors are given. We need to state whether they are true or…
Q: SITUATION 1: You are responsible for two subcontractors, earthwork and roofing, on your megaproject.…
A: When the general contractor gets a contract with the owner of a construction project. Then the…
Q: he following information belongs to a target cost contract: Target cost = $250 M Target band = $230…
A: The information for a target cost contract is given below, Target cost = $250 M Target band = $230 M…
Q: ABC Construction Company enters into a contract with XYZ Municipality to construct a new public…
A: It is given that ABC Construction Company enters into a contract with XYZ Municipality to construct…
Q: For the given ground conditions, the time (in days, rounded to the nearest integer) required for 90%…
A:
Q: Engr. David is holding a permanent position as Engineer II in the Department of Public Works and…
A: Civil engineering is the application, throughout history, of physical and scientific concepts to…
Q: QUESTION 1 We have a three storey structure from a client and the requirement is to complete in 5…
A: The construction process refers to the sequence of activities and tasks that are involved in the…
Q: PPRA Evaluation Criteria based Analyse the Adequacy of the on STB Bidding Large Works. Document for…
A: These documents have been prepared as a global document intended to be used by different…
Q: Question 1 A. On a project, the contractor failed to complete the project on time and the project…
A: Offer consideration first after going through all the details why the firm A was unable to complete…
Q: If the specifications are silent on the subject, but a contractor asks you, as the Resident Project…
A: If the specifications are silent on the subject, but a contractor asks you, as the Resident Project…
Q: that can cause a short or long term cost increase within the scope of a construction project? A) The…
A: Ans is given in below tab
Q: 29. Since the owner has little day-to-day involvement, he is in all matters by the construction…
A: Solution for Question 29 – Since the owner has little day-to-day involvement, he is represented in…
Q: each persons under the Construction (Design and Management) Regulations: (a) The client (b) The…
A: THESE 3 ARE VERY IMPORTANT ROLES TO CARRY IN CONSTRUCTION WORK
Q: Q1. Q2. Q3. Q4. Q5 Which of the following area in construction industry deals with tendering process…
A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…
Q: 9-Identify the costing method that is suitable for mines, quarries, cement works etc. a. Operation…
A: The correct answer is option a i.e, Operation Operation cosing is suitable for mines, quarries,…
Q: Why should the Acceptance of the work must proceed according to the termsof construction and…
A: Acceptance of any construction work must proceed according to the terms of construction and contract…
Discuss “Contract System” of CNW KPK for civil construction work from inviting of tender to allotment of work
![](/static/compass_v2/shared-icons/check-mark.png)
Step by step
Solved in 2 steps
![Blurred answer](/static/compass_v2/solution-images/blurred-answer.jpg)
- You are the Team Lead of a Consultant building a multi-use facility. The facility consists of 150 residential buildings, a football park, a commercial area, 2.5km of all-weather roads with adjoining roads. The designs for all structures have been completed and reviewed to ensure that the standards and the Client’s brief are totally complied with. The Bill of Quantities for the whole the works have also been developed based on the drawings and specification. Advice your team on the best Method of Measurement to be adopted to prepare the Bill of Quantities and used for valuing work on completion.C. Discuss the consideration provided under construction contracts by a. Client b. ContractorQ1/ Answer by true or false (T or F) of TEN of the following: 1- The main contractor does not need to appoint sub-contractors to design the structural elements in the traditional approach? 2- In traditional approach, Variations to the contract are not relatively easy to arrange and manage considered as one of the advantages? 3- In traditional approach, work cannot be accelerated by overlapping design and construction activities. 4- It is better not to use traditional approach when client wishes to appoint designers and contractors separately. 5- Due to the high risk in turn-key approach that only contractor bears, thus the contract in such approach may require higher cost. 6- The cost of depreciation does not depend on the maintenance cost. 7- When the no. of hours for changing oil increases, then the oil consumption will increase too. 8- The equipment can be considered standard if it is familiar and can be used in several projects. 9- For economic purposes, one should always make a…
- The following table represents the activities of a small construction pro- ject that is required as follows Act. Dur. Dep. on A 5 B 12 C 7 A 10 E 7 2 D,E 12 D,E G 10 F 4 D,B H,G,F H,G,F M 2 K N M,L 1) Find the critical path and project implementation period. 2) The contractor stipulates a delay fine of one million dinars for each day of delay, the amount of the delay fines that the contractor will pay if the event is delayed (J) (6 weeks), knowing that a week is equal to (6 days). 3) The contractor applied the incentive system for workers within the activities G, D, so that the productivity of that group increased by 50%, what is the time period in which the project duration decreased. 4) The delay of the contractor in the implementation of the event (L) so that the total project period was delayed (3 weeks). VWhat is the period during which the event was delayed (L)? 5) Activity D.E is carried out using a specific machine. Will the contractor pay a late fine if only one machine is…Calculate the cost per cubic yard to place concrete using each of the alternatives described. The work in both cases consists of placing 140 cubic yards of concrete in footings. a. Using a crane and bucket at a price of $225 per hour, including an operator, with a crew consisting of 6 laborers, a cement finisher, and a foreman. The concrete will be placed in 7 hours using this setup, and transportation of the crane costs $390. b. Using a concrete pump at a price of $295 per hour, including an operator and a crew consisting of 5 laborers, a cement finisher, and a foreman. With this setup, concrete is placed in 6 hours and transportation of the pump costs $290.QUESTION 1 We have a three storey structure from a client and the requirement is to complete in 5 months for shell and core only. Attached are the architectural and structural drawings. As a construction manager/ site engineer (A) Elaborate on the steps needed to be taken to complete this task on time, explaining the roles of the different personnel needed for this task. (B) Determine the realistic programme, test requirement and procurement schedules needed for this task (C) What tools/personnel and materials do you think will be needed to set out the building in question and how will you ensure that there is no misalignment of the floors going up. (D) Provide a skeleton of a bill of quantity for the above drawings. No rates, quantity or amount is needed.
- Question 1 A. On a project, the contractor failed to complete the project on time and the project was terminated. Because of the urgency involved to complete the project, another Contractor 'B' was asked to immediately takeover and proceed with the works without going for a tender or entering into a written contract. Assuming you are the contract manager for the Contractor 'B', what advice would you give to your company on the following: Offer, Acceptance, Consideration, Mutuality of obligations, Competency and capacity before proceeding to start working?If the specifications are silent on the subject, but a contractor asks you, as the Resident Project Representative or inspector, how to perform the work, which of the following is the recommended procedure? a. Be ready to help by telling the contractor your opinions,because as a member of the construction team,it is your responsibility. b. Politely decline because construction means andmethods are the sole prerogative of the contractor.c. Direct the contractor how to perform the workbecause you know that if the contractor asked you,it meant that he or she did not know how to execute the work, and the project may otherwise suffer delays or failures.EXPLAIN YOUR ANSWER COMPREHENSIVELY. Mr. Jobert commissioned you to estimate the construction of a certain structure. As Engineers, our job includes giving detailed estimate inclusive of labor and materials. If approved, the contract for building the structure will be awarded to you. However, Mr. Jobert already had a previous consultation with Prudencio, an independent foreman, who offered labor and services at a cheaper price. How will you convince Mr. Jobert to engage in your services instead of Prudencio's? Cite applicable provisions of the Code of Ethics for such situation.
- 14Enumerate FOUR duties of each of the following persons under the Construction (Design and Management) Regulations: (a) The client (b) The principal designer (c) The principal contractor.Upon completion of all preliminary stages of a project (design development and detail design), the works must be assigned to a contractor to commence the construction. An open tender will be employed to select a competent main contractor for the project. Explain a suitable conventional tendering process in selecting the contractor.
![Fundamentals Of Construction Estimating](https://www.bartleby.com/isbn_cover_images/9781337399395/9781337399395_smallCoverImage.gif)
![Fundamentals Of Construction Estimating](https://www.bartleby.com/isbn_cover_images/9781337399395/9781337399395_smallCoverImage.gif)