Consider a router buffer preceding an outbound link that has a transmission capacity of 100 packets/second. Assume that the router is operating in a steady-state with no packet losses. Suppose packets arrive at the router an average rate of 80 packets/second to use the outbound link. Calculate the following values. The traffic intensity is A packet uses the outbound link for seconds. The average delay (queuing and transmission) experienced by a packet is seconds. The average number of packets in the router waiting to use or using the outbound link is

Consider a router buffer preceding an outbound link that has a transmission capacity of 100 packets/second. Assume that the router is operating in a steady-state with no packet losses. Suppose packets arrive at the router an average rate of 80 packets/second to use the outbound link. Calculate the following values. The traffic intensity is A packet uses the outbound link for seconds. The average delay (queuing and transmission) experienced by a packet is seconds. The average number of packets in the router waiting to use or using the outbound link is

Computer Networking: A Top-Down Approach (7th Edition)

7th Edition

ISBN:9780133594140

Author:James Kurose, Keith Ross

Publisher:James Kurose, Keith Ross

Chapter1: Computer Networks And The Internet

Section: Chapter Questions

Problem R1RQ: What is the difference between a host and an end system? List several different types of end...

See similar textbooks

Related questions

Q: Give a simple heuristic for finding two paths through a network from a given source to a given…

A: According to the information given:- We have to define a simple heuristic for finding two paths…

Q: A sender with window size (W=3) is connected to a selective repeat receiver by a link with…

A: Solution: Given, the window size (W) of the sender is 3, the bandwidth of the link is 106…

Q: Consider a router that transmits bits onto a transmission medium at the rate of 2 Mbps. Let the link…

A: Given: Bandwidth = 2 Mbps => 2 *106 bits/sec Distance = 3 km Speed = 3 * 108 meter/sec…

Q: Computer A is sending a 10 MByte long file to Computer B via packet-switching over two consecutive…

A: Computer networking which refers to interconnected computing devices that can exchange data and…

Q: Eight data terminals statistically share the capacity of an outgoing link. Traffic is combined from…

A: The Handwritten Solution is given below:

Q: 2. Packet transmission. a. Consider a packet of length L that begins at end system A and travels…

A: Below is the complete solution with explanation in detail for the given questions about Packet…

Q: Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive…

A: Here in this question we have given that Total size = 100kB Bandwidth= 10Mbps. Link distance…

Q: Consider a simple protocol for transferring files over a link. After some initial negotiation, A…

A: Protocol:- This is the set of official rules or standard set of a system governed by the supreme…

Q: Suppose a message of length 10 Mbytes needs to be transmitted from the router to your home PC and…

A: Answer: This question from networking. and given message of length 10Mbytes and packet size 1000. we…

Q: Equation 1.1 gives a formula for the end-to-end delay of sending one packet of length L over N links…

A: A packet is a discrete chunk of data transferred via a network, like the Internet or a local area…

Q: Suppose one packet is transmitted from a source to a destination via a path of N links each with a…

A: The question pertains to analyzing transmission delays in computer networks. It involves…

Q: Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive…

A: Given that, Size of the file= 100 KB Bandwidth of the link= 10 Mbps Distance of each link= 1000 Km…

Q: Give a simple heuristic for finding two paths through a network from a given source to a given…

A: Give a straightforward heuristic for locating two routes within a network that can still be followed…

Q: Computer A is sending a 10 MByte long file to Computer B via packet-switching over two consecutive…

A: Given that, Length of file= 10 MB Length of packet= 1480 bytes Bandwidth of the link= 100 Mbps…

Q: A router has the following four active flows, and each flow has packets to transmit. Given FQ is…

A: Given, A router has the following four active flows, and each flow has packets to transmit. Given FQ…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

Suppose that KJ sends 3596 back-to-back packets, with each packet composed of 14,000 bits, to TA over 5 links (shown below). Suppose that the transmission rate of each link is 70,000 bits/sec (bps). Consider the routers to be store-and-forward routers. In such a scenario, find the endto- end delay of sending all the packets to TA (i.e., the time needed for the last bit of the last packet to arrive at TA since KJ starts transmitting the first bit of the first packet). Note, consider only the transmission delay that occurs in sending packets in your analysis. Show the steps used for derivation in detail. 70,000 bps 70,000 bps 70,000 bps 70,000 bps 70,000 bps KJ Router 1 Router 2 Router 3 Router 4 ТА
Let a denote the rate of packets arriving at a link in packets/sec, and let μ denote the link’s transmission rate in packets/sec. Based on the formula for the total delay (i.e., the queuing delay plus the transmission delay) derived in the previous problem, derive a formula for the total delay in terms of a and μ.
TCP a. Consider two TCP connections, one between Hosts A (sender) and B (receiver), and another between Hosts C (sender) and D (receiver). The RTT between A and B is half that of the RTT between C and D. Suppose that the senders' (A's and C's) congestion window sizes are identical. Is their throughput (number of segments transmitted per second) the same? Explain. b. Now suppose that the average RTT between A and B, and C and D are identical. The RTT between A and B is constant (never varies), but the RTT between C and D varies considerably. Will the TCP timer values of the two connections differ, and if so, how are they different, and why are they different? Give one reason why TCP uses a three-way (SYN, SYNACK, ACK) handshake rather than a two-way handshake to initiate a connection. a.
2. Suppose a router has three input flows and one output. It receives the packets listed in the following table all at about the same time, in the order listed, during a period in which the output port is busy but all queues are otherwise empty. Give the order in which the packets are transmitted, assuming (a) Fair queuing (b) Weighted fair queuing, with flow 2 having weight 2, and the other two with weight 1. Packet Size Flow 1 100 1 2 100 1 100 1 100 1 190 200 110 3 8 50 3
In modern packet-switched networks, including the Internet, the source host segments long, application-layer messages (for example, an image or a music file) into smaller packets and sends the packets into the network. The receiver then reassembles the packets back into the original message. We refer to this process as message segmentation. Figure 1.27 illustrates the end-to-end transport of a message with and without message segmentation. Consider a message that is 8. 106 bits long that is to be sent from source to destination in Figure 1.27. Suppose each link in the figure is 2 Mbps. Ignore propagation, queuing, and processing delays. a. Consider sending the message from source to destination without message segmentation. How long does it take to move the message from the source host to the first packet switch? Keeping in mind that each switch uses store-and-forward packet switching, what is the total time to move the message from source host to destination host? b. Now suppose that…
Consider the subnet in Fig. 3.11.5. Distance vector routing is used and the following vectors have just come in to router C: from B (5, 0, 8, 12, 6, 2); from D(16, 12, 06, 0, 9, 10) and from E(7, 6, 3, 9, 0, 4). The measured delays to B, D and E are 6, 3 and 5 respectively. What is C's new routing table? Give both the outgoing line to used and the expected delay ? A B E Fig. 3.11.5 F D
Consider a sender having an infinite number of frames to send, which we index as 0, 1, 2, .... Assume the transmission delay of each frame is 2t, the ACK transmission time is t, the propagation delay is 3t and symmetric on both directions, and the timeout value is T = 8 starting from the end of frame transmission onto the link. The first frame is sent out at time 0. Show Transcribed Text 3 Ĉ E. Explain what will happen if the sequence number space has exactly the same number of sequence numbers as the number of allowed maximum number of outstanding frames, e.g., when N = W = 10, and the sequence numbers available are only 0-9.
Consider a broadcast channel with N nodes and a transmission rate of R bps. Suppose the broadcast channel uses polling (with an additional polling node) for multiple access. Suppose the amount of time from when a node completes transmission until the subsequent node is permitted to transmit (that is, the polling delay) is ?poll. Suppose that within a polling round, a given node is allowed to transmit at most Q bits. What is the maximum throughput of the broadcast channel?
Consider a packet of length L that begins at end system A and travels over three links to a destination end system. These three links are connected by two packet switches. Let d, s, and R denotes the length, propagation speed, and the transmission rate of link i, for i=1,2,3 . The packet switch delays each packet by d . Assuming no queuing delays, in terms of d, s , R, (i=1,2,3), and L, what is the total end-to-end delay for the packet? Suppose now the packet is 1,500 bytes, and the propagation speed on all three links are 3125km/sec, 10000 km/sec, and 3333km/sec respectively. The transmission rates of all three links are 2 Mbps, the packet switch processing delay is 3 msec, the length of the first link is 5,000 km, the length of the second link is 4,000 km, and the length of the last link is 1,000 km. For these values, what is the end-to-end delay? In the above problem, suppose R1=R2=R3=R and dproc=0. Further, suppose the packet switch does not store-and-forward packets but…
Consider the following network with given line speeds and lengths: Assume the speed of light is 2×10^8 m/s, and that the processing and queuing delays are negligible. Node A sends a 1400-byte frame to node C through node B. Suppose Node A starts sending the first bit of the frame at t=0. Answer the following questions: a. At what time (t=?) node B receives the frame in full (i.e. the last bit)? b. After node B receives the frame in full, then it will start sending the frame to node C. Determine the time (t=?) when node C receives the frame in full. c. Suppose at this time node C sends a small acknowledgment back to node A. The transmission time for the acknowledgment is negligible. Calculate at what times (t=?) the acknowledgment arrives at nodes B and A. d. Assume after sending its frame, node A wait for the acknowledgment back from node C before sending the next frame. What is the average throughput (number of transmitted bits per second) of the data flow from node A to…
Consider a simple protocol for transferring files over a link. After some initial negotiation, A sends data packets of size 1 KB to B; B then replies with an acknowledgment. A always waits for each ACK before sending the next data packet; this is known as stop-and-wait. Packets that are overdue are presumed lost and are retransmitted. (a) In the absence of any packet losses or duplications, explain why it is not necessary to include any "sequence number" data in the packet headers. (b) Suppose that the link can lose occasional packets, but that packets that do arrive always arrive in the order sent. Is a 2-bit sequence number (that is, N mod 4) enough for A and B to detect and resend any lost packets? Is a 1-bit sequence number enough? (c) Now suppose that the link can deliver out of order and that sometimes a packet can be delivered as much as 1 minute after subsequent packets. How does this change the sequence number requirements?
Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive 10 Mbps links of 1000 km length each.Assume that the signal propagation speed on both links is 2.5 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1500 bytes and that Computer A fills each packet to the max, if possible. How "long" (in meters) is one bit on link 1?