An open horizontal tank 3 m high, 3.5 m wide and 6 m long is initially filled at 2 m of water. a. Determine the required acceleration in m/s² so that no water will be spilled? 3.270 Determine the required acceleration m/s? so that 1/3 of the initial volume of water will be spilled. b. ( Select ] c. Determine the remaining volume in cu.m. if it accelerated at 7 m/s^2. [Select] Determine the minimum hydrosatic force in kN at the side of the tank if 2/3 of the initial volume will be spilled. d. ( Select ) Determine the maximum hydrosatic force in kN at the side of the tank if it accelerates at 3 m/s^2. e. ( Select )

An open horizontal tank 3 m high, 3.5 m wide and 6 m long is initially filled at 2 m of water. a. Determine the required acceleration in m/s² so that no water will be spilled? 3.270 Determine the required acceleration m/s? so that 1/3 of the initial volume of water will be spilled. b. ( Select ] c. Determine the remaining volume in cu.m. if it accelerated at 7 m/s^2. [Select] Determine the minimum hydrosatic force in kN at the side of the tank if 2/3 of the initial volume will be spilled. d. ( Select ) Determine the maximum hydrosatic force in kN at the side of the tank if it accelerates at 3 m/s^2. e. ( Select )

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: A reservoir is filled with 4 m of water. A pump of area 0.009 m² at the bottom of the reservoir is…

A: ###Determination of flow rate Q through pump ##

Q: The tank shown has one curved surface restraining a body of static fluid, with the following…

A: To determine the magnitude of the resultant force on the curved surface. Given, Width of the tank…

Q: Water flows to a circular pipe with a constant raduis of 10 cm. the speed and pressure at point A is…

A: Given,Radius of circular pipe, R = 10 cm = 0.1 mVelocity at point A, vA = 4 m/secPressure at point…

Q: Compute the magnitude of the resultant force, in kN, to the nearest 100th.

A: To find the magnitude of resultant force subtract the subtract the magnitude of the smaller force…

Q: In a stream line steady flow, two points A and B on a stream line are 1 m apart and the flow…

A: Distance s = 1 m, Velocity VA= 2 m/s, Velocity VB = 5 m/s, It is needed to find the acceleration of…

Q: Oil (SG = 0.80) flows through a pipe AB 120 cm in diameter at 3 m/s and then passes through a pipe…

Q: -Q.17 MASS FLOW AT A PIPE JUNCTION Consider the steady flow in a water pipe joint shown in the…

Q: Q.1.17 "MASS FLOW AT A PIPE JUNCTION Consiuer the steady flow in a water pipe joint shown in the…

A: Given that: Area at section 1, A1=0.2 m2Area at section 2, A2=0.2 m2Area…

Q: The tank is filled with water and kerosene to the depths shown. Determine the total resultant force…

Q: 17. An open cylindrical tank 4 m in diameter and 10 m high contains 4 m of oil sg = 0.9. An orifice…

A: The objective of the question is to calculate the time required to discharge all the oil from a…

Q: 1 velocity of V₁ = 1.7 m/s. The water in the pipe then exits vertically into the air. If the head…

Q: If the inlet diameter of the holding tank is 35cm and the outlet diameter is 30cm and the diameter…

Q: 17. An open cylindrical tank 4 m in diameter and 10 m high contains 4 m of oil sg = 0.9. An orifice…

Q: 4. A 60-cm-wide belt moves as shown in the figure. Calculate the horsepower requirement assuming a…

Q: A cylindrical container with a massless and frictionless piston is filled with water up to a height…

Q: The ball B of negligible size rolls through the tube such that at the instant shown in (Figure 1) it…

A: Given: To find: Part A: Velocity of the ball if the tube has an angular velocity, ω = 3 rads/s and…

Q: For the following flows, determine the components of rotation about the various axes. (a) u= xy°z, v…

Q: A closed cylinder 0.6 m in diameter and 0.6 m in height is filled with water (p=1000 kg/m² ). If the…

Q: Between two sections in a vessel, a fluid moves in a steady flow manner. At entrance: A1=20 cm?,…

A: At entrance - A1 = 20cm2 ρ1 = 1878 kgmm3 At exit - A2 = 10cm2 v2 = 249.5 cm3gv2 = 3048 cmmin

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

An open horizontal tank 3 m high, 3.5 m wide and 6 m long is initially filled at 2 m of water.
a. Determine the required acceleration in m/s² so that no water will be spilled?
3.270
Determine the required acceleration m/s? so that 1/3 of the initial volume of water will be spilled.
b.
[ Select ]
c. Determine the remaining volume in cu.m. if it accelerated at 7 m/s^2.
[ Select ]
Determine the minimum hydrosatic force in kN at the side of the tank if 2/3 of the initial volume will be spilled.
d.
[ Select ]
Determine the maximum hydrosatic force in kN at the side of the tank if it accelerates at 3 m/s^2.
е.
[ Select ]

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A water reservoir of 300 (Height) x 300 (width) x 500 (depth) m has its free surface at 250 m above a bottom outlet orifice of 500 mm in diameter. The velocity coefficient of the orifice is 0.96 and the coefficient of contraction of the flow through the orifice is 0.6. Assume that the reservoir has a cubic shape. Q1. Calculate the velcoity of water in the reservoir when it starts to empty (m/s)
Thanks !!!!
a. 8.71 L/s b. 2.70 L/s c. 4.54 L/s d. 7.64 L/s
It’s required to determine the height (H) when the flow is 120 L/s ؟
From the figure below, determine the flow rate. Assume 3K1 = K2 = 1.5K3 = 2K4Let K1 = 3.5 x 10^2 cm/s
A vessel 2 m in diameter containing 4 m high of water is being raised upward. Find the pressure at the bottom of the vessel when; a.) the velocity is constant. b.) the vessel is accelerating 2.5 m /sec²? A vessel partly filled with liquid and moving horizontally with the constant linear acceleration has its liquid surface inclined 45° . Determine its acceleration.? An open rectangular tank 3.8 m high, 2.5 m wide and 6 m long is filled with water at a depth of 2.2 m. If the tank is accelerated at 2.3 m/s². Compute the maximum acceleration without spilling any water.
The 275-kg circular craft is suspended 100 mm from the ground. For this to occur, air is drawn in at 18 m/s through the 200-mm-diameter intake and discharged to the ground as shown. Take Pu = 1.22 kg/m³. Assume the fluid is an ideal fluid, that is, incompressible and frictionless. (Figure 1) -1.5 m -1.5 m -200 mm B 100 mm Determine the pressure that the craft exerts on the ground. Express your answer to three significant figures and include the appropriate units.
A 2.10 m diameter closed cylinder, 2.75 m high is completely filled with oil having sp. gr. Of 0.8 under a pressure of 5 kg/cm^2 at the top. Compute the pressure force exerted by oil on the side of the tank in kg.
Water flows into a conical vessel at a constant rate of Q cm³/s. The vessel has a height of 18 cm and a diameter of 10 cm at the top. When the water is 12 cm deep, the water level is rising at the rate of 0.115 cm/s. Find the value of Q.
answer simple thanks
The tank shown has one curved surface restraining a body of static fluid, with the following dimensions: w = 5.25 m h1 = 2.4 m R1 = 0.90 m Required Compute the magnitude of the resultant force, in kN, to the nearest 100th. Water h1 R1
A tank in the shape of an inverted right circular cone is full of water. The water weighs 62.462.4 pounds per cubic foot. The height of the tank is 1010ftft and the radius of its top is 44ftft.