An open cylindrical container 800 mm in diameter and 1.50 meter high contains fresh concrete (s= 2.0) at a depth of 1.20 meters. What will be the amount of concrete spilled in liters when rotated accidentally at the rate of 120 rpm?

An open cylindrical container 800 mm in diameter and 1.50 meter high contains fresh concrete (s= 2.0) at a depth of 1.20 meters. What will be the amount of concrete spilled in liters when rotated accidentally at the rate of 120 rpm?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Calculate the sieve analysis shown in Table P5.19 and plot on a semilog gradation paper. What is the maximum size? What is the nominal maximum size?
1. Given the results of an Atterberg limit test. Complete the test report which will include filling out the two tables, plotting the Liquid Limit results and finding the Water Content, the Plastic Limit, the Liquid Limit, and the Plasticity Index. Use a ruler when hand drawing the line or when finding the points in the graphic to achieve good precision. W PL PL PL Type of test Container No. 1 2 3 4 Wet wt + container 15.50 4.92 4.54 5.70 12.50 4.23 3.92 4.81 Dry wt + container Wt of water Wt of container Dry wt of soil Water content% 2.10 1.50 1.51 1.45 Container No. 5 7 8 No. of blows 30 20 14 Wet wt + container 5.25 5.35 4.80 Dry wt + container 4.26 4.25 3.73 Wt of water Wt of container 1.67 1.59 1.49 Dry wt of soil Water content% 50% 45% W 40% LL 35% PL € 30% PI 25% 20% Water Content% 10 20 30 40 Number of Blows 50 6525 45 4.25 3.55 1.53 100
PV laundry facility uses 1 m/min and wants to design an exchange process to remove hardness from the water. The municipal water that they use contains 80 mg/L of calcium and 36.6 mg/L of Magnesium. Total hardness should be reduced to 80 mg/L of CaCO3. The resin has a Total Hardness (TH) capacity of 60 kg TH/m³ of resin, and the recommended hydraulic loading rate is 0.5 m³/m².min. a) What is the water flow rate (m³/d) that needs to be treated? b) What is the total daily resin volume (m³) required to soften the water? c) What is the area of the exchanger needed?
A test is set-up as shown in the figure below. A cylindrical mold 4" in diameter is filled with silt to a height H1 = 0.20 ft whose coefficient of permeability is 6.10 x 10^-4 ft/min.A second coaxial mold, placed on top of the silt inside the first mold, has an inside diameter of 1.50" and height of H2=0.30 ft. Its thickness is negligible. The inside of this second mold is filled with the same silt, but the annular ring outside is filled with sand whose coefficient of permeability is 2.50 x 10^-3 ft/min.The test set-up is a permeameter of constant head. Water is placed in the mold and maintained at a level h=1.25 ft above the level of the outlet. It may be considered that the system consists of a fictitious soil of thickness H = H1 + H2 and coefficient of permeability kf. What is the equivalent coefficient of permeability of the system in ft/min?
The probability that a certain kind of concrete cylinder sample will survive a given shock test is %. Find the probability that exactly 2 of the next 4 samples tested survive? At least 1 sample of the next 4 samples will survive?
A crate is given an initial speed of 2.5m/s up the 20.0° plane. If the planehas a kinetic friction of 0.15 calculate, (a) How far up the plane will it go?(b) How much time elapses before it returns to its starting point?
Determine the volume of concrete, number of 40kg bags of cement, volume of sand, volume of gravel, number of plywood and 2x2 wood frame for the outdoor pad shown on the plan.Use Class A mixture. hello please estimate this thanks
Steel Centre Philippines uses hydraulic press or ram to punch holes in a 14mm thick steel plate as shown in the figure. If the punching shear resistance of the plate is 280 N/mm^2. Determine what is the maximum diameter of the hole that can be punched. Assume P is 85 tons (Hint: 1 ton = 1000kg). Hydraulic ram Plate
The question is in the picture. Help please, thanks
An open cylindrical container 800 mm in diameter and 1.50 meter high contains fresh concrete (s= 2.0) at a depth of 1.20 meters. What will be the amount of concrete spilled in liters when rotated accidentally at the rate of 120 rpm? %3D
13. What is the standard size of a concrete compression specimen (the cylinders we tested)? What are the prescribed steps in correctly making a standard concrete cylinder specimen?
A concrete cylinder with radius of 10 inches and height of 10 inches is to be held in equilibrium under water by attaching a lightweight foam buoy to it. (In theory, the attached foam buoy and concrete cube, when placed under water, will neither rise nor sink) If the specific weight of concrete and foam are 150 lb/ft3 and 5.0 lb/ft3, respectively, what minimum volume of foam is required?