A. Two inductors whose self-inductances are given as 75mH and 55mH respectively, are positioned next to each other on a common magnetic core so that 75% of the lines of flux from the first coil are cutting the second coil. Calculate the total mutual inductance that exists between the two coils. B. When two coils having inductances of 5H and 4H respectively were wound uniformly onto a non- magnetic core, it was found that their mutual inductance was 1.5H. Calculate the coupling coefficient that exists between. C. How much is the inductance of a coil that induces 500 V when the current changes at the rate of 5mA in 2μs?

A. Two inductors whose self-inductances are given as 75mH and 55mH respectively, are positioned next to each other on a common magnetic core so that 75% of the lines of flux from the first coil are cutting the second coil. Calculate the total mutual inductance that exists between the two coils. B. When two coils having inductances of 5H and 4H respectively were wound uniformly onto a non- magnetic core, it was found that their mutual inductance was 1.5H. Calculate the coupling coefficient that exists between. C. How much is the inductance of a coil that induces 500 V when the current changes at the rate of 5mA in 2μs?

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Problem 2: Consider the magnetic core shown in figure P-2 and notice that three sides of the core are of uniform width, whereas the forth side is somewhat thinner. The depth of the core into the page is 10 cm. The coil has 300 turns and the relative permeability of the core is 2500. Determine the current that will produce 50 mWeb flux in the core. I 10cm 20cm Figure P-2 ★ 5cm T 10cm 20cm 10cm
w2
2. AC-core with a gap of 0.0001m has a coil number of 100 and a current of 10mA. First find the Reluctance of the core given that the Iron core has a negligible reluctance and only the air reluctance contributes to the majority of reluctance. The core has a cross sectional area of 2cm^2. Next find the flux flowing thru the C-core.
A magnetic circuit has 150 turns-coil, the cross- sectional area 5 x 10-4 m2 and the length of the magnetic circuit 25 x 10-2 m. What are the values of magnetic field intensity and relatíve permeability when the current is 2 A and total flux is 0.3 x 10-3 Wb? (a) 1200 AT/m and 397.9 (b) 300 AT/m and 500 x 10-6 (c) 300 AT/m and 397.9 (d) 1200 AT/m and 500 x 10-6
Consider the magnetic circuit in Figure. Assuming that the core µ= 1000µo has a uniform cross section of 4 cm2,N= 400 , the flux density in the air gap. 0.2 A L = 42 cm 4 = 0.1 cm 35.4 mwb 60.5 mwb 70.8 mwb Non of These
Assume relative permeability = 1 ..
5. A cast-iron core of the shape indicated below has the following pertinent dimensions: ab = 10 cm and bc = 15 cm. Find the mmf required if the magnetic field intensity in the thinner side is H1= 100 A-turns/m and the thicker side is H2 = 46 A-turns/m. b 2011
Find the inductance per unit length of a very long solenoid with a unit length of N windings. The permeability of the core is μ.
Adding a core of magnetic material to an electromagnet: Select one: allows greater current to flow. decreases AC impedance. greatly increases the inductance. eliminates the magnetic poles.
Please answer second question, and can it be hand written because i find typed work difficult to follow
(b) A ferromagnetic is shown in figure Q3(b). Find the value of the current that will produce a flux of 0.005wb. With this current, what is the flux density at the top of the core? What is the flux density at the right side of the core? Assume that the relative permeability of the core is 1000. The depth of the core is 5cm. The other dimensions of the core are as shown in the figure. 15 cm 500 turns 15 cm 45 cm 5 сm 15 cm 10 cm 35 cm Figure Q3(b)
A ten-turn solenoid has a ferromagnetic core with a relative permeability of 10,000. The length of the solenoid is l=10 cm and its cross section area is A=1 cm2. The amount of current driving the solenoid is 0.1 A. Determine the magnetic flux intensity H in the core. Provide your answer in A/m. Round off to your answer to one decimal.