a. How a high Stattng toraue 10obtatned with ainduction motor. Wrate downcage TotorevarciowaSpeed contrrol machaninmaof induatron motOt 2A 208 V, GOHZ 12pole, Y-connectedindustion motore iə tated at 15hp.4t equivalent circuit componentahave the ollong valuer:R1=0 200 ohm%3DX1 = O. 410 ohmR2= 0' 120 ohmmX2 = 0 A20 Ohm.Xm = 15.0 Ohm.RotoTe Slip 5% at the tatedvoHage and treaueney.mochanicaland coce lossea aTre 2 50W and180 w terpectively. Find-Drotore SpeedLine cuTrent and motore P.fAiregapand converted powerinduced toraue.

Note: According to our policy i am providing the answer to the first three questions only Answer (a)…

a. How a high Statting torque 1s obtatned with a nductiom motot. Wreite down varciowa speed co l machanioma of inducton motot2 2 cage Totore 208 V, GOOHZ,2P0le, Y-connected induction motore a tated aat 15hp. 4+ equivalent circuit componenta have the followng valuera. R1=0.200 omm X1 = 0 4 0 ohm R2=0. 120 ohmm X2 = 0 420 Ohm. xm= 15.0 0hm. RotoTe SIip To 5% at the tated vottage and freaueney.mochanical and core lomen ane 25 ow and 180 w teApectively. Find- Drotore Speed D Line current and motore P.f

a. How a high Statting torque 1s obtatned with a nductiom motot. Wreite down varciowa speed co l machanioma of inducton motot2 2 cage Totore 208 V, GOOHZ,2P0le, Y-connected induction motore a tated aat 15hp. 4+ equivalent circuit componenta have the followng valuera. R1=0.200 omm X1 = 0 4 0 ohm R2=0. 120 ohmm X2 = 0 420 Ohm. xm= 15.0 0hm. RotoTe SIip To 5% at the tated vottage and freaueney.mochanical and core lomen ane 25 ow and 180 w teApectively. Find- Drotore Speed D Line current and motore P.f

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 3-phase, 400/200 V, Y-Y connected wound-rotor induction motor has 0.06 Q rotor resistance and 0.3 Q standstill reactance per phase. To make the starting torque equal to the maximum torque, the additional resistance required in the rotor circuit will be O 0.24 0/phase O 0.42 0/phase O 0.34 Q/phase O 0.52 Q/phase
A direct current shunt dynamo continuously supplies an ohmic load of 50 Ohm at terminal voltage Vt= 1000 V. The armature winding resistance is 5 Ohm and the shunt pole winding resistance is 200 Ohm. The sum of mechanical losses is 400 W. What is the percent efficiency of the dynamo under these operating conditions? a) 70 b) 74 c) 87 d) 78 e) 85
At rest condition, the slip of induction motor is 0. Select one: True False
A four-pole induction motor drives a load at 2478 rpm. This is to be accomplished by using an electronic converter to convert a 400-V dc source into a set of three-phase ac voltages. Part A Find the frequency required for the ac voltages assuming that the slip is 4 percent. The load requires 2 hp. Express your answer to three significant figures and include the appropriate units. f= Submit Part B Value I = HA Request Answer Submit If the dc-to-ac converter has a power efficiency of 90 percent and the motor has a power efficiency of 80 percent, estimate the current taken from the dc source. Express your answer to three significant figures and include the appropriate units. HÅ Value Units Request Answer ? Units ?
Need answer for this thanks
A repulsion start, induction run motor is used to drive a fan. The motor has a rated power of 2kW and operates at 220V. The repulsion start winding has a resistance of 0.5 ohm while the induction winding has a resistance of 0.3 ohm. Determine the total loss in the motor, assume 0.8 pf.
A 3-phase 50 Hz I.M. has a rated torque = 16.7 N.M and maximum torque = 40.5 N.M. If its rated speed = 910 R.P.M, the speed at :maximum torque will be R.P.M 578.280 R.P.M 421.640 R.P.M 590.160 None O
For the design we assuming following parameters 1) winding : Lap 2) simplex 3) Number of slots : 16 , single turn coil with 2 conductors per slot 4) Number of poles = 4
A large 3-phase, 4160 V, 60 Hz, squirrel-cage induction motor draws a current of 400 A and the total active power of 2500 kW when operating at full-load. The corresponding speed is accurately measured and is found to be 1178 r/min. The stator is connected in wye and the resistance between two stator terminals is 0.15 0. The total iron losses are 26.5 kW and the windage and friction losses are 15 kW. Calculate the following: The power factor at full-load The active power supplied to the rotor The total I²R losses in the rotor The load mechanical power [kW], torque [kN.m], and efficiency [%] a. b. C. d.
A 400V, 25hp, 60HZ, 4 pole, Y-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1=0.6410, X1=1.106 Q, Rp=11.080, Xf=6.680 .The total rotational (windage and friction) losses are 1100 W and are assumed to be constant. The core loss is jumped in with the rotational losses. For a rotor slip of 3.2% at the rated voltage and rated frequency, the stator current is
I need the answer as soon as possible
In DC Shunt Motor the back emf E. = Select one: O a. V-IR O b. V/I.R₂ O C. V+ I₂R₂ O d. VI /R₂