A venturimeter with a 75 mm diameter throat is placed in a 150 mm diameter line carrying water at 25°C. The pressure drop between the upstream tap and the venturi throat is (-AP) 300 mmHg. Calculate the volumetric flow rate in the pipe (Cv = 0.98)

Q: Water flows from the 0.75 inch diameter outlet (as shown). (2) 2.8 In. (1) 0.75 in. What is the…

A: Diameter D=0.75 inch                   =0.75/12 ft There is two position (1) and (2) Find Gauge…

Q: 3. As shown in the figure below, water at 20°C is flowing through the tubes A and B, then joining…

A: Temperature of water, T=20°C Diameter of tube A, DA=1 mm=1×10-3 m Maximum velocity through tube A,…

Q: Water flows in a pipeline composed of 75 mm and 150 mm pipe. Calculate the mean velocity in the 75…

A:

Q: A straight pipe with an expansion in pipe from 6 to 11 cm transports water at a rate of 0.011 m3 /s.…

A: Let,   The diameter at point 1 be, d1 = 6 cm The diameter at point 2 be, d2 = 11 cm Transportation…

Q: A garden hose attached with a nozzle is used to fill a 10-gal bucket. The inner diameter of the hose…

A: Volume of bucket = 10 gal 1 gal = 3.789 × 10-3 so volume of bucket = 3.789 × 10-2 m3 Initial…

Q: A Venturi meter having a throat diameter of 150 mm is installed in a horizontal 300-mm-diameter…

A: D2= 150 mm D1= 300mm Cd= 0.982 Q = 0.142m/s

Q: K()" where K=0.05 Pa.sº.. It A non-Newtonian fluid is modelled by the equation of r = K ( flows…

A: Given, Diameter of pipe = 6 mm i.e R = 0.003 m

Q: 1. Water is flowing from the inlet to the exit. At the inlet the speed is 20m/s. Calculate (a) the…

A: Given,

Q: Air is carried through a tube with an inside diameter of 12.7 mm. At a point 145 ft upstream of the…

A: Given that: Initial pressure, P1 =20 psia, Since, 1 psia = 6894.76 Pa Hence, P1 = 20×6894.76 Pa =…

Q: On a circular pipe there are different diameters: diameter D1= 2 m changes into D2 = 1.5 D1. The…

A:

Q: he flow through a ½ in diameter pipe is 2 GPM with a pressure drop of 3 PSI. What would the pressure…

A: Diameter of pipe = 0.5  Pressure in pipe = 2GPM Pressure drop = 3 PSI Pressure drop in 1.5 inch…

Q: A vertical Venturi meter, as shown in Figure Q3 below, carries a liquid of specific gravity 0.9 and…

A: specific gravity = 0.9 D1 = 250 mm and D2 = 175 mm  Q = 80 liters s-1 density = 1000 kg/m3 Cd = 0.96

Q: 1. The ff. equation is proposed to calculate the pressure drop (Ap) across a length of pipe (L) due…

A:

Q: mooth inner surface for

A:

Q: Water flows steadily from an open tank as represented in the diagram below. The elevation (from…

A: Area at point A = 0.048m2 Area at point B =0.0160 m2 elevation at point A =10m elevation at point B=…

Q: 17. Calculate the pressure at point A in Fig. 2.50. The slope of the tube is 4 horizontal to 1…

A: Reservoir review is given.Calculate pressure at point A.

Q: A centrifugal exhauster is takin in dry air from a room where the temperature is 60 °F and the…

A: Simple figure for above question Z=1ft pressure change=1.2 in of water Find Temperature of air in…

Q: Water at 20°C is flowing through a tube of diameter 0.010 m at a velocity of 0.10 m/s. a. Calculate…

A: Water is flowing through the tube at 200C. Tube diameter, D=0.010 m velocity of the water through…

Q: Q.2 As shown in the following figure, a water jet rises 3 in. above the exit of the vertical pipe…

A: Pressure at point (1) and the volumetric flow rate at point (1) is asked.

Q: Water flow at between 3000-4000 cm3/s through a 75 mm diameter pipe and is metered by means of an…

A: Given data: Flow rate of water = 3000-4000 cm3/s Diameter of pipe = 75 mm Coefficient of discharge =…

Q: A vertical tank 1.4 m in diameter and 2.4 m high contains water to a height of 1.8 m. Water flows…

A: Diameter,d = 1.4 m radius. r = 0.7 m tank height, h = 2.4 m water height, h1 = 1.8m Therefore, total…

Q: Water is flowing vertically upwards through a pipeline having diameter 1m and 0.5m at the base and…

A: Write the given data with suitable variables. d1=1 md2=0.5 mh1=450 mm of Hg=0.45 m1 m1000 mmP2=20…

Q: Water is flowing inside the pipe shown in the sketch below. A Venturi meter equipped with a…

A: Given thatdp =12 cmdt = 6 cmh =4.5 cm

Q: Question 3 The average volumetric flow through an open rectangular duct can be estimated using the…

A:

Q: Water exits a pipe as a free jet and flows to a height h above the exit plane as shown in Fig.…

A: Bernoulli's theorem is to be applied in this case. It states that the summation of pressure head,…

Q: Water is flowing through a 2.067-in ID pipe with a velocity of 1 m/s. Calculate: (a) Mass flowrate…

A: Density is the ratio of mass by volume. The mass flow rate is the ratio of unit mass per unit time.…

Q: g-0. flowing through nozzle ects the mer ube gage. Determine the value of h if the pressure at A is…

A: Given data: Specific gravity of Oil;SG=0.750PA=20 psi=137895 Pad=2.75 inches=0.069 m

Q: Water at 30°C is being pumped through a 30 m section of 19.49 cm. diameter steel pipe at a mass flow…

A: Given data: Length of the pipe = 30 m Diameter of pipe = 19.49 cm Mass flow rate = 0.07 kg/s Density…

Q: A stream of water from a fire hose with a flow rate of 320 gallons per minute and a speed of 35 m/s…

A:

Q: A water pipe is laid on a slope of 1 in 40. The pipe is 50 m long. Water flows downwards at the rate…

A:

Q: Water is pumped at 1.4 m/s from a tank at a treatment plant to a tank at a local works through two…

A: Volumetric flow rateQ=1.4m3/sd1=0.3md2=0.6mAssume: turbulent flow, pressure drop is same.To find:1.…

Q: The wastewater treatment process at a polymer plant consists of a longitudinal bio-remediation pond…

A:

Q: (a)    A venturimeter with 150 mm diameter at inlet and 100 mm at throat is laid with its axis…

A:

Q: Water is flowing through a 2.067-in D pipe with a velocity of 1 m/s. Calculate: (a) Mass flowrate…

A: