A specimen of ductile cast iron having a rectangular cross section of dimensions 4.8 mm X15.9 mm is deformed in tension. Use the load-elongation characteristics shown in thefollowing table to answer the following questions.Load0 4,740 9,140 12,920 16,540 18,300 20,170 22,900 25,070 26,800 28,640 30,240 31,100 31,280 30,820 29,180 24,140 18,970(N)1) Whatis theLength 75 75.025s 75.05 75.075 75.113 75.15 75.225 75.375 75.525 75. 75 76.57879.58181.5848788.725(тm)magnitude of modulus of elasticity?2) What is the magnitude of Ultimate tensile strength of this alloy.3) What is the magnitude of The ductility in percent elongation?Determine the indices for the vectors shown in the following figure:+21) indices for the vectors ABA.2) indices for the vectors B3) indices for vector c

Modulus of elasticity can be defined as the ratio of the stress experienced by a body or in a body…

A specimen of ductile cast iron having a rectangular cross section of dimensions 4.8 mm x 15.9 mm is deformed in tension. Use the load-elongation characteristics shown in the following table to answer the following questions.

A specimen of ductile cast iron having a rectangular cross section of dimensions 4.8 mm x 15.9 mm is deformed in tension. Use the load-elongation characteristics shown in the following table to answer the following questions.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Given E (The Modulus of Elasticity) of 25,000 ksi, hardening modulus of 5,000 ksi, and fy (yield…

Q: During laboratory testing of an 8-inch steel-alloy rod with a cross sectional area of 32in a tensile…

A: To find modulus of elasticity and Poisson's ratio

Q: Answer fast

A: Solution:a) Maximum Stress CalculationFormula:Maximum Stress = Fplastic / A 3. Calculation:Maximum…

Q: In a tensile test for an aluminum alloy, the sample used is 2 inches long and 0.5 inches in…

A: A tensile test is performed on an aluminum specimen, whose length is 2 inches and diameter is 0.5…

Q: An aluminum rectangular bar has a cross-section of 25 mm x 50 mm and a length of 500 mm. The Modulus…

Q: Consider a metal bar 12.5 mm in diameter and 50 mm in length that is tested under uniaxial tension.…

Q: A 10.0 mm diameter cylindrical specimen of a bearing bronze material is pulled under uniaxial…

A: given-10.0 mm diameter 1500 N force∆d=0.67 mmn=0.35

Q: A specimen of aluminum having a rectangular cross section 10.4 mm × 12.6 mm (0.4094 in. × 0.4961…

A: So, stress can be defined as ; σ = PA P = Tension pull = 35900 A = 10.4 * 12.6 = 131.04 mm2 σ =…

Q: Problem 4 The test data of the coupon tests of stainless steel alloys are given for three test…

A: Given, Stress strain data for three specimens To find : Elastic modulus, Yield stress and yield…

Q: A tension test performed on a metal specimen to fracture produced the stress– strain relationship…

A: The given figure is shown below:

Q: 1.5-7 The data shown in the table were obtained from a tensile test of a metal specimen with a…

A: Specimen area = 0.2 in2Specimen length = 2 inTo find:a. Generate a table of stress and strain…

Q: During laboratory testing of an 6-inch aluminum-alloy rod with a cross sectional area of 0.32in², a…

A: Given data : Initial Length (Li)=6 inInitial area (AI)=0.32 in2Tensile load (P)=50000 lbsFinal area…

Q: Consider a square aluminum element of 3in. Dimensions as shown in figure below. If a force is…

A: Poisson's ratio (μ) = 0.33 Deformation along y-axis (δLy) = 0.02 in. Determine the strain in the X…

Q: A prismatic aluminum bar has cross-sectional dimensions 40 x 60 mm and a length of 350 mm. The…

A: Step 1:Step 2:

Q: In a tensile test for an aluminum alloy, the sample used is 2 inches long and 0.5 inches in…

Concept explainers

Material Properties

Construction in civil engineering demands high strength, durability, and longevity. These targets can be achieved by better design and analysis, along with the correct choice of materials. Different materials have different properties and hence, they respond and performs differently under the various condition of external loadings. It is therefore a critical task of an engineer to select the right material based on the property that the material is supposed to function in real-time. When speaking about the property, there are different categories of material properties like chemical property, physical property, mechanical property, electrical property, magnetic property, thermal property, etc. These material properties form the basis of material selection in various applications.

Question

A specimen of ductile cast iron having a rectangular cross section of dimensions 4.8 mm X
15.9 mm is deformed in tension. Use the load-elongation characteristics shown in the
following table to answer the following questions.
Load
0 4,740 9,140 12,920 16,540 18,300 20,170 22,900 25,070 26,800 28,640 30,240 31,100 31,280 30,820 29,180 24,140 18,970
(N)
1) What
is the
Length 75 75.025s 75.05 75.075 75.113 75.15 75.225 75.375 75.525 75. 75 76.5
78
79.5
81
81.5
84
87
88.725
(тm)
magnitude of modulus of elasticity?
2) What is the magnitude of Ultimate tensile strength of this alloy.
3) What is the magnitude of The ductility in percent elongation?
Determine the indices for the vectors shown in the following figure:
+2
1) indices for the vectors A
B
A.
2) indices for the vectors B
3) indices for vector c

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Introduction

VIEW

Step 2: Calculation of Question 1

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

The stress-strain diagram for a steel alloy having an original diameter of 0.5 in. and a gage length of 2 in. is given in the figure. If the specimen is loaded until it is stressed to 70 ksi, determine the approximate amount of elastic recovery and the increase in the gage length after it is unloaded. o (ksi) 80 70 60 50 40 30 20 10 e (in./in.) 0 04 0.08 0.12 0.16 0.20 0.24 0.28 0 0005 0.0010.0015 0.002 0.0025 0.0030.0035
I need the answer as soon as possible
A tension test performed on a metal specimen to fracture produced the stress-strain relationship shown in Figure. Graphically determine the following (show units and all work):a. Modulus of elasticity within the linear portion.b. Yield stress at an offset strain of 0.002 in./in.c. Yield stress at an extension strain of 0.005 in/in.d. Secant modulus at a stress of 62 ksi.e. Tangent modulus at a stress of 65 ksi.
A cylindrical bar of steel 9.9 mm (0.3898 in.) in diameter is to be deformed elastically by application of a force along the bar axis. Determine the force that will produce an elastic reduction of 3.0×10-3 mm (1.181 ×10-4 in.) in the diameter. For steel, values for the elastic modulus (E) and Poisson's ratio (v) are, respectively, 207 GPa and 0.30. i N
Can I get a step by step walkthrough?
A round steel alloy bar with a diameter of 19mm and a gauge length of 76mm was subjected to tension, with the results shown in Table. Using a computer spreadsheet program, plot the stress–strain relationship. From the graph, determine the Young’s modulus of the steel alloy and the deformation corresponding to a 37kN load.
A brass alloy rod having a cross sectional area of 0.24 in.2and a modulus of 16 * 106 psi is subjected to a tensile load. Plastic deformation was observed to begin at a load of 8,944 lb.a. Determine the maximum stress that can be applied without plastic deformation.b. If the maximum length to which a specimen may be stretched without causing plastic deformation is 3.28 in., what is the original specimen length?