Answered: A solid cylindrical disk has a radius… | bartleby

Related questions

Question

100%

A solid cylindrical disk has a radius of 0.11 m. It is mounted to an axle that is perpendicular to the circular end at its center. When a 71-
N force is applied tangentially to the disk, perpendicular to the radius, the disk acquires an angular acceleration of 200 rad/s². What is
the mass of the disk?
Number
Units
α

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A uniform rod is set up so that it can rotate about an axis at perpendicular to one of its ends. The length and mass of the rod are 0.765 m and 1.27 kg respectively. A force of constant magnitude ?F acts on the rod at the end opposite the rotation axis. The direction of the force is perpendicular to both the rod's length and the rotation axis. Calculate the value of ?F that will accelerate the rod from rest to an angular speed of 6.21 rad/s in 9.91 s
M, a solid cylinder (M=2.27 kg, R=0.131 m) pivots on a thin, fixed, frictionless bearing. A string wrapped around the cylinder pulls downward with a force F which equals the weight of a 0.750 kg mass, i.e., F = 7.357 N. Calculate the angular acceleration of the cylinder. R M F
One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first force has a magnitude of 2.00 N and is applied perpendicular to the length of the stick at the free end. The second force has a magnitude of 6.00 N and acts at a 36.1o angle with respect to the length of the stick. Where along the stick is the 6.00-N force applied? Express this distance with respect to the end of the stick that is pinned.
A circular disk with a radius of 0.38 m is subject to 2 tangentially applied forces. The disc is fixed such that it will rotate about its center. Both forces produce a torque in the same direction. The mass of the disc is 0.73 kg. The moment of inertia of a disc is I =1/2MR^2 F1 = 2.3 N applied at the outer edge of the disc. F2 = 3.6 N applied at a distance of 0.29 from the center of the disc. What is the angular acceleration of the disc?
A counterweight of mass m = 3.60 kg is attached to a light cord that is wound around a pulley as shown in the figure below. The pulley is a thin hoop of radius R = 7.00 cm and mass M = 3.00 kg. The spokes have negligible mass. (a) What is the net torque on the system about the axle of the pulley? V N.m to the right along the axis of rotation v magnitude 2.4695 direction (b) When the counterweight has a speed v, the pulley has an angular speed w = v/R. Determine the magnitude of the total angular momentum of the system about the axle of the pulley. (3.705 Note that your numerical answer is multiplied by the symbol v in the answer box. kg • m)v (c) Using your result from (b) and 7 = L/dt, calculate the acceleration of the counterweight. (Enter the magnitude of the acceleration.) 6.925 The expression for the angular momentum in part (b) has a factor of v. How do you determine dL/dt, from this expression? m/s2
A 17.0-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.490 kg-m², and its radius is 0.150 m. When turning, friction at the axle exerts a torque of magnitude 3.20 N-m on the reel. If the hose is pulled so that the tension in it remains a constant 26.0 N, how long does it take to completely unwind the hose from the reel? Neglect the mass and the thickness of the hose, and assume that the hose unwinds without slipping.
A uniform disk of mass m = 1.4 kg and radius R = 25 cm can rotate about an axle through its center. Four forces are acting on it as shown in the figure. Their magnitudes are F1 = 3.5 N, F2 = 3.5 N, F3 = 7.5 N and F4 = 3.5 N. F2 and F4 act a distance d = 2.5 cm from the center of mass. These forces are all in the plane of the disk. m = 1.4 kgR = 25 cmF1 = 3.5 NF2 = 3.5 NF3 = 7.5 NF4 = 3.5 Nd = 2.5 cm Write an expression for the magnitude τ1 of the torque due to force F1. Calculate the magnitude τ1 of the torque due to force F1, in N⋅m. Write an expression for the magnitude τ2 of the torque due to force F2. Calculate the magnitude τ2 of the torque due to force F2, in N⋅m. Write an expression for the magnitude τ3 of the torque due to force F3. Write an expression for the magnitude τ4 of the torque due to force F4. Calculate the magnitude τ4 of the torque due to force F4, in N⋅m. Calculate the angular acceleration α of the disk about its center of mass in rad/s2. Let…
A uniform disk with mass m = 8.75 kg and radius R = 1.41 m lies in the x-y plane and centered at the origin. Three forces act in the +y- direction on the disk: 1) a force 315 N at the edge of the disk on the +x-axis, 2) a force 315 N at the edge of the disk on the -y-axis, and 3) a force 315 N acts at the edge of the disk at an angle 0 = 38° above the -x-axis. +y +x F3 IF, F2
A uniform disk (1=1/2 mR2) has a mass of 3 kg and a radius of 2m. The disk is mounted on frictionless bearings and is used as a turntable. The turntable is initially rotating at 120 rpm (revolutions per minute, convert it to rad/s). A hollow cylinder has the same mass and radius as the disk. It is released from rest, just above the turntable, and on the same vertical axis. The hollow cylinder slips on the turntable for 0.20 s until it acquires the same final angular velocity as the turntable. (HINT: Note that some of the information given is not needed! Think which conservation law(s) apply.) The final angular momentum of the system is closest to: L = Submit [5] ΑΣΦ Request Answer ? kg. m²/s 4
A circular disk with a radius of 0.5 m is subject to 2 tangentially applied forces. The disc is fixed such that it will rotate about its center. Both forces produce a torque in the same direction. The mass of the disc is 0.69 kg. The moment of inertia of a disc is I MR² = F₁ = 2.6 N applied at the outer edge of the disc. F₂ = 4 N applied at a distance of 0.26 from the center of the disc. What is the angular acceleration of the disc?
The radius of a wheel is 0.890 m. A rope is wound around the outer rim of the wheel. The rope is pulled with a force of magnitude 5.00 N, unwinding the rope and making the wheel spin CCW about its central axis. Ignore the mass of the rope. (a) What is the angular displacement Δθ, in radians, of the wheel during 1.10 revolution? ___rad