A part to be turned in an engine lathe must have a surface finish of 1.6 mm. The part is made of a free machining aluminum alloy. Cutting speed = 150 m/min, and depth of cut = 4.0 mm. The nose radius on the tool = 0.75 mm. Determine the feed that will achieve the specified surface finish

Q: A drilling operation is performed to create a through hole on a steel plate that is 20 mm thick.…

A:

Q: i. spindle rpm ii. feed speed iii. cutting time iv. material removal rate

A:

Q: From the speed chart below, determine the correct cutting speed for performing a facing cut on Brass…

A: Milling is the process of machining the surface of the object. Milling is done with the help of a…

Q: In an orthogonal cutting operation an 8 mm deep groove is to be turned on a 50 mm diameter steel…

A:

Q: From the speed chart below, determine the correct cutting speed for facing a 2 in. diameter Cast…

A:

Q: A cast iron component for motorcycle is to be tumed with machine settings of feed = 0.22 mm/rev, and…

A: Surface roughness is calculated.  If you liked my solution, I would really appreciate a LIKE, please…

Q: A 16mm Solid carbide tool with two teeth is used to machine Aluminium using the cutting speed of…

A:

Q: 5. An engine lathe is used to turn a cylindrical work part, cutting speed 2.4 m/s, feed 0.20 mm/rev,…

A:

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: The time required to saw a rectangular piece of stainless steel plate 3.5 meters long and 2.25…

A:

Q: length is 1100 mm. The feed is 0.35 mm/rev and the depth of cut is 2.5 mm. The cut will be made with…

A: Given data:-diameter of bar, D=400mmLength of bar, L=1100mmfeed, f=0.35mm/revdepth of cut,…

Q: 17) A50-mm-dia endmill cuts 6061 aluminum with 30% tool engagement at a depth of 6 mm. The tool…

A:

Q: A part to be turned in an engine lathe must have a surface finish of 1.6 μm. The part is made of a…

A: Proper tool Nose radiusing improves machinability to some extent though. It increase the tool life…

Q: What is the recommended feed for the turning operation above?

A:

Q: single-point cutting tool with 12° rake angle is used to machine a steel work-piece. The depth of…

A: Given:uncut thickness, t1=0.81 mmchip thickness, t2=1.8

Q: Calculate the time required for completing

A: Given DataDepth of cut d = 5 mmwith  w = 150  mmLength of the elate l= 600 mmThickness t = 25…

Q: A Ø2.0" piece of alloy steel needs to be turned in a lathe using a carbide cutting tool. The surface…

A:

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.