A long, slender structural aluminum [E = 69 GPa] flanged shape is used as a L = 9.2-m-long column. The column is supported in thex direction at base A and pinned at ends A and Cagainst translation in the y and z directions. Lateral support is provided to the column so that deflection in the x-z plane is restrained at mid-height B; however, the column is free to deflect in the x-y plane at B. Assume that b; = 102 mm, d = 122 mm, t; = 8 mm, and t, = 6 mm. Determine the maximum compressive load P the column can support if a factor of safety of 2.9 is required. In your analysis, consider the possibility that buckling could occur about either the strong axis (i.e., the z axis) or the weak axis (i.e., the y axis) of the aluminum column.

A long, slender structural aluminum [E = 69 GPa] flanged shape is used as a L = 9.2-m-long column. The column is supported in thex direction at base A and pinned at ends A and Cagainst translation in the y and z directions. Lateral support is provided to the column so that deflection in the x-z plane is restrained at mid-height B; however, the column is free to deflect in the x-y plane at B. Assume that b; = 102 mm, d = 122 mm, t; = 8 mm, and t, = 6 mm. Determine the maximum compressive load P the column can support if a factor of safety of 2.9 is required. In your analysis, consider the possibility that buckling could occur about either the strong axis (i.e., the z axis) or the weak axis (i.e., the y axis) of the aluminum column.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A long, slender structural aluminum [E = 73 GPa] flanged shape is used as a L = 5.0-m-long column. The column is supported in the x direction at base A and pinned at ends A and C against translation in the y and z directions. Lateral support is provided to the column so that deflection in the x-z plane is restrained at mid-height B; however, the column is free to deflect in the x-y plane at B. Assume that bf = 110 mm, d = 128 mm, tf = 8 mm, and tw = 4 mm. Determine the maximum compressive load P the column can support if a factor of safety of 2.7 is required. Consider the possibility that buckling could occur about either the strong axis (i.e., the z axis) or the weak axis (i.e., the y axis) of the aluminum column. 1) Determine the moment of inertia with respect to the y and the z axes through the centroid of the cross section area.
Problem 1: (Please solve parts A and B of problem) A) A uniformly distributed load is subjected on the clamped-clamped beam and it is supported by a spring in the middle of the beam. Using Castigliano’s theorem, find the deflection in the spring. (Please use only Castigliano’s theorem to solve this part) B) Remove the spring in part A and use the Rayleigh-Ritz method to solve for the deflection at the middle of the beam. Assume that v(x) = C (1- Cos((2Pi*x)/L)) (Please use only Rayleigh-Ritz method for this part)
A beam weighing 50 kg is attached to a pin at C and supported by a steel cable OA with Young's modulus, E= 200 x 10° N/m2 as shown in Figure Q2. An inclined force of 5000 N is applied to end of the beam at point D with 40° angle measured from the x-Axis. 5000 N Sna pho Wel 2.5 m B. 888-888- 4m By providing your a automateditext mer messaging eates may 5 m 3 m Figure Q2 Loadings on beam My Textbo a) Draw a free-body diagram of the beam Solunons b) Calculate the tension of steel cable OA c) Determine the reaction forces of Fex and Fey d) Determine the elongation of steel cable OA byChego
2. A square glass reinforced plastic plate 3 mm thick is simply supported along all the edges. The plate is subjected to uniform distributed load q. The elastic properties of the plate are: Ex = 40 kN/mm², E, = 8 kN/mm², Gxy = 4 kN/mm², µHxy = Hyx = 0.25. Obtain an expression for deflection function of the plate using Levy's solution. Also determine the maximum deflection of the plate. Take origin at the top left corner of the plate.
Please explain each step. Thank you
5
Please answer all parts of the question. Thank you so much
3. A 3-meter-long beam is used to support a heavy object. The object has a uniform distributed load of 6 kN/m on the entire beam. The Young’s modulus and moment of inertia of the beam are 200 GPa and 5×105 mm4, respectively. The beam is supported at three positions as shown below. (a) Label the element and node numbers (either on the figure or with a new simple sketch). (b) Determine the slopes at the three support positions of the beam.
A rectangular steel bar supports the two overhanging loads. Using superposition, find the deflection at the ends and at the center.
Assume portion ABC of the rod is made of steel (E4e= 200 GPa , v=0.3) and portion CD is made of aluminum (E,lumi = 70 GPa , v=0.25). A 1.75 m Area = 800 mm² 120 kN B 1.25 m C Area = 500 mm² 1.5 m 80 kN D 60 kN The deflection of point C is_ The resulting change in diameter of portion AB of the bar is_
Need help please, round answers to 3 sig figs
What is the magnitude of the reaction force at RAX and RAY in Newtons What is the magnitude of the reaction force, RBX and RBY in Newtons.