A copper cylinder with a length of 1.5 m and diameter of 4 cm undergoes compression. Bulk Modulus (14*10^10 Pa) What will be the bulk strain of the copper rod if pressure is applied to reduce its volume to 0.00089 m3? How much pressure was applied to the copper rod? Calculate the percent change in volume of the copper rod

A copper cylinder with a length of 1.5 m and diameter of 4 cm undergoes compression. Bulk Modulus (14*10^10 Pa) What will be the bulk strain of the copper rod if pressure is applied to reduce its volume to 0.00089 m3? How much pressure was applied to the copper rod? Calculate the percent change in volume of the copper rod

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.7.5P: Determine the strain energy per unit volume (units of psi) and the strain energy per unit weight...

See similar textbooks

Similar questions

Determine the strain energy per unit volume (units of psi) and the strain energy per unit weight (units of in ) that can be stored in each or the materials listed in the accompanying table, assuming that the material is stressed to the proportional limit. DATA FOR PROBLEM 2.7-5 Material Weight Density (lb/in3) Modulus of Elasticity (ksi) Proportional Limit (psi) Mild sleel 0.284 30,000 36,000 Tool steel 0.284 30,000 75,000 Aluminum 0.0984 10,500 60,000 Rubber (soft) 0.0405 0.300 300
A tube has 25mm outside diameter and an axial tensile load of 40 kN. If the strain on the tube is limited to 0.1% and density of 7800kg/m^3, what is the maximum internal diameter of the tube in mm?
If the Young's modulus and Poisson's ratio of the container material are 100 GPa and 0.3 respectively, What is the axial strain in the cylinder wall at mid-depth?
A copper cylinder with a length of 1.5 m and diameter of 4 cm undergoes compression. (refer to the image ) (a) What will be the bulk strain of the copper rod if pressure is applied to reduce its volume to 0.00089 m3? (b) How much pressure was applied to the copper rod? (c) Calculate the percent change in volume of the copper rod.
A steel column is a cylinder 6.8 m long and 0.35 m in diameter. What is the change in length of the column when it experiences a tensile stress resulting from the application of a 3600 N force? The elastic modulus for steel is 20 × 1010 Nm2/kg2. ΔL = m
A 0.1-in wire that is 10-in long and supports a 100-lb weight stretches a total of 0.1-in. What is the strain for the wire?
The question is related to Modulus of rigidity and is attached as an image.
A solid bar of length L = 4 m and diameter 200 mm is heated from 20 to 320 degrees celsius and restrained between two solid immovable walls. Young's modulus of the material is 90 GPa and the coefficient of thermal expansion is 22 x 10-6/°C. →Calculate the thermal strain, e, in micro-strain correct to two decimal places. micro-strain. Calculate the thermal stress, o, in megapascals (MPa) correct to two decimal places. E: σ: MPa. Hence calculate the force exerted by the bar in meganewtons (MN) correct to two decimal places: F MN. L
My answer is displayed and incorrect. Please give answer in ksi.
Determine the elastic tensile load "F" that acts on mild steel specimen of Diameter 9 mm & Modulus of Elasticity 201 GPa. It is found that the specimen has undergone an extension of 1 mm due to the elastic load "F". Also, determine the length "L" of the specimen, if the strain- induced due to the load "F" on the specimen is 3.6 x 10-³. Solution Cross-sectional Area, A (in mm²) = 63.617 One possible correct answer is: 63.617251235193 Tensile Stress, (in N/mm²) 723.6 One possible correct answer is: 723.6 Tensile Load, (in N) = = 46033.261 One possible correct answer is: 46033.442993786 Length of the Specimen (in mm) 4.366 X One possible correct answer is: 277.77777777778
Determine the elastic tensile load "F" that acts on mild steel specimen of Diameter 5 mm & Modulus of Elasticity 207 GPa. It is found that the specimen has undergone an extension of 1.2 mm due to the elastic load "F". Also, determine the length "L" of the specimen, if the strain-induced due to the load "F" on the specimen is 3 x 10-³. Solution Cross-sectional Area, A (in mm²) = Tensile Stress, (in N/mm²) = Tensile Load, (in N) = Length of the Specimen (in mm)
A steel Column is 10m long and Ø1.2m. It carries a load of 102MN. Given the modulus of Elasticity is 256GPA. Find the stress, Strain, and determine how much the column is compressed. Label the following diagram to show Stress, Strain, Tensile Strength, Yield Strength and Rupture Strength