A 4-m simply supported timber beam is to be designed to carry a total uniform load of 10 kN/m including its own weight. The timber is 80% stress grade Apitong. The nominal size of the beam is 200 mm x 260 mm. Before installation, the width and depth are to be reduced by 10 mm. 7a Find the maximumshearing stress. a. 0.50 MPa b. 0.63 MPa d. 1.20 MPa c. 0.86 MPa 7b. Find the maximum bending stress. a. 12.50 MPa C. 11.20 MPa 7c. Find the maximum deflection. a. 18.43 mm b. 8.50 MPa d. 10.11 MPa c. 14.50 mm b. 25.63 mm d. 12.60 mm

A 4-m simply supported timber beam is to be designed to carry a total uniform load of 10 kN/m including its own weight. The timber is 80% stress grade Apitong. The nominal size of the beam is 200 mm x 260 mm. Before installation, the width and depth are to be reduced by 10 mm. 7a Find the maximumshearing stress. a. 0.50 MPa b. 0.63 MPa d. 1.20 MPa c. 0.86 MPa 7b. Find the maximum bending stress. a. 12.50 MPa C. 11.20 MPa 7c. Find the maximum deflection. a. 18.43 mm b. 8.50 MPa d. 10.11 MPa c. 14.50 mm b. 25.63 mm d. 12.60 mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A laminated beam is composed of four (4) planks, each of 150 mm x 30 mm, glued together to form a section 150 mm x 150 mm. The allowable shear stress in the glue is 850 kPa, the allowable shear stress in the wood is 1050 KPA, and the allowable flexure stress in the wood is 10 MPa. Determine the maximum uniformly distributed load which can be carried by the beam on a 45 m simple span.
A piece of wood with a triangular cross section contains a rubberized joint to aangle θ with the vertical. The stress that the wood resists in tension is 20 MPa, the rubber resists10 MPa in tension and 12 MPa in shear. If θ = 60, determine the maximum load P.
hello please answer this thanks ?
Determine the average normal stress developed in the wood fibers that are oriented along section a-a at 40° with the axis of the block. The section of the block measures 80 mm(width) x 120 mm(height) and is subjected to a 4kN compressive force. *
For the beam and loading shown, design the cross section of the beam, knowing that the grade of timber used has an allowable normal stress of 12 MPa.
Practice Problem 4.5 A rectangular beam has a width of 320 mm and an effective depth of 570 mm. Concrete cover is 60 mm from the centroid of bars. Concrete compressive strength, f'c= 24 MPa. Steel yield strengths are 415 MPa for longitudinal bars and 275 MPa for hoops. Stimups are placed in 2 layers with a diameter of 10 mm. Detemine the required spacing of the stimups when a) The required strength Vu is 50 kN b) The required strength Vu is 90 kN c) The required strength Vu is 130 kN d) The required strength Vu is 290 kN e) The required strength Vu is 360 kN f) The required strength Vu is 570 kN
A rectangular concrete beam having a width of 250 mm and an effective depth of 350 mm will be design loads as stated. The steel yield strength fy = 275 MPa and concrete strength f’c = 20.7 MPa. If the compression steel is found necessary, it will be placed 60mm from the extreme compression fiber of the beam. Neglect the effect of the displaced concrete and use NSCP 2010. A.Determine the number of pieces of 20mmØtension steel for a singly reinforced section reinforced with maximum steel for tension control. B.Determine the number of pieces of 20mmØtension reinforcements if beam is to carry a factored design moment of 80 kN.m. C.Determine the number of pieces of 20mmØtension reinforcements if beam is to carry a factored design moment of 135 kN.m. D.Determine the number of pieces of 20mmØcompression reinforcements if beam is to carry a factored design moment of 135 kN.m. hello please answer this thanks
SHOW COMPLETE SOLUTION AND ILLUSTRATION
A reinforced concrete beam section is 375 mm wide and 500 mm deep. The beam carries service live load of 105 kN-m and a service dead load of 210 kN-m. Use f’c = 21 MPa and fy = 415 MPa. If the compression steel is found necessary, the effective concrete cover to be used for the said bars will be 65 mm. At ultimate condition, U = 1.2 D + 1.6 L. Use a strength reduction factor of 0.9. a) Determine the required nominal design moment for the section in kN-m. b) Determine the number of pices of 28 mm diameter tension reinforcements required for the section. c) Determine the number of pieces of 28 mm diameter compression reinforcements required for the beam considering the effect of the concrete displaced by the bars.
Hi can you please complete the question fully thanks so much
1.2m 10 cm O 7cm -7cm O This concrete beam has four A-35 steel rods of one centimeter diameter and a square cross section. It experiences a compressive axial load of 200kN. You must calculate the stresses developed in the two components in the figure.
A concrete beam of length 5.5m is built monolithically with the slab. Originally, the beam has a width of 300mm and effective depth of 400mm. If the flange of the slab is 150mm and the total area tension steel bars is 500 sq.cm., determine the design capacity of the beam structure. The concrete has a compressive strength of 25 MPa, steels' yield strength is 420 MPa. and the beam's clear span from its adjacent beams is 2.15m.