7. Consider a cylindrical specimen of a steel alloy (Figure 6.22) 10.0 mm (0.39 in.) in diameter and 75 mm (3.0 in.) long that is pulled in tension. Determine its elongation when a load of 20,000 N (4,500 lbf) is applied

Q: 8.22 Consider the brass alloy for which the stress-strain behavior is shown in Figure 8.12. A…

A:

Q: A tensile stress is applied along the long axis of a cylindrical brass rod thathas a diameter of 10…

A: if you have any doubt please comment

Q: Figure 8.31 Stress (logarithmic scale) versus steady-state creep rate (logarithmic scale) for a low…

A: Specimen length: 1015 mm (40 in.)Tensile stress: 70 MPa (10,000 psi)Temperature: 427°C (800°F)Total…

Q: . Consider a cylindrical nickel wire 0.08 in. in diameter and 1200 in. long. Calculate its…

A:

Q: What minimum diameter is required for the wire?

A: Given data: -  The length of the steel wire is L = 1.95 m. The permissible elongation is δ = 0.270…

Q: What is the modulus of elasticity

A: force F = 613 kNdiameter d = 43 mm = 0.043 mlength L = 304 mm = 0.304 melongate length l = 0.00224 m

Q: A cylindrical bar of metal having a diameter of 18.3 mm and a length of 209 mm is deformed…

A: Diameter of specimen, d=18.3 mm Length of specimen, L=209 mm Tension force, F=52500 N Modulus…

Q: Q2] ( 12 Marks) A specimen of magnesium having a rectangular cross section of dimension 3.2 mm x…

A: GivenArea=3.2mm×19.1mmlength=63.5

Q: A load of 500 N is applied on a cylindrical wire of 3.0 mm diameter and 2.5 x 10* mm length. The…

A: Solution: Given Data: P = 500 N d = 3 mm L = 25000 mm E = 107 GPa     To Find: Elongation in the…

Q: A test piece is cut from a brass bar and subjected to a tensile test. With a load of 6.4 kN the test…

A: “Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: A tensile force of 200 KN is applied on a 0.02-m diameter and.2-m long rod. After applying the load,…

A:

Q: A 0.013 m diameter, 0.5 m long cylindrical metal bar is subjected to a compressive force of 8,500 N.…

A:

Q: Consider a cylindrical nickel wire 1.6 mm in diameter and 3.5 × 104 mm long. Calculate its…

A:

Q: The shear stress-strain diagram for an alloy is shown in the figure below (Figure 1). Take ✔ = 0.3.…

A: Given: ν=0.3 d=0.23 in τy=50 Ksi γ=0.004 rad

Q: A titanium alloy (Ti-5Al-2.5Sn) specimen with the dimensions shown below is subjected to a uniaxial…

A: The stress of a bar is given by,  , where P is the normal load and A is the cross-section area of…

Q: consider a cylindrical nickle wire 1.9 mm in diameter and 3.0*104 mm long. calculate its elongation…

A:

Q: 25.4 kN tensile load is applied on a 320 mm long cylindrical rod having a diameter of 10 mm. The rod…

A:

Q: n of aluminum having a rectangular cross section 9.6 mm × 13.0 mm (0.3780 in. × 0.5118 in.) is…

A: Given:Area, A=9.6*13.0 mm2F=35800 NE=69 GPa

Q: A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To…

A:

Q: A specimen is originally 300 mm long, has a diameter of 14 mm, and is subjected to a force of 2kN.…

A: The answer is provided below.

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.