6-121. The composite beam is made of steel (A) bonded to brass (B) and has the cross section shown. If the allowable bending stress for the steel is (oallow)a = 180 MPa, and for the brass (oallow) br =60 MPa, determine the maximum moment M that can be applied to the beam. E = 100 GPa, E =200 GPa. 150 mm 200 mm B M 175 mm

6-121. The composite beam is made of steel (A) bonded to brass (B) and has the cross section shown. If the allowable bending stress for the steel is (oallow)a = 180 MPa, and for the brass (oallow) br =60 MPa, determine the maximum moment M that can be applied to the beam. E = 100 GPa, E =200 GPa. 150 mm 200 mm B M 175 mm

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter5: Beams

Section: Chapter Questions

Problem 5.5.15P

See similar textbooks

Similar questions

The composite beam is made of 6061-T6 aluminum (A) and C83400 red brass (B). If the height h = 40mm, determine the maximum moment that can be applied to the beam if the allowable bending stress for the aluminum is (σal)allow = 128 MPa, and for the brass (σbr)allow = 35MPa.
Assume the transformed steel section reaches its allowable bending stress first. Calculate the magnitude of the allowable bending moment that can be applied in this case. Answer: M- i Ib-in.
pls reply
A flexural member is fabricated from two flange plates 1/2x16 and a web plate 1/4x20, thusforming a built-up ‘I’ shape member. The yield stress of the steel is 50 ksi.a. Compute the plastic section modulus Z and the plastic moment Mp with respect to the majoraxis.b. Compute the section modulus S and the plastic moment My with respect to the major axis
#1 will upvote to anyone who will answer
For the built-up shape shown,determine:(a) the elastic section modulusand the yield moment(b) the plastic section modulusand the plastic moment Mp.Bending is about the x-axis,and the steel is A572 Grade50. Fy = 345 MPa
6- For a simply supported beam with b=300 mm and d=500 mm, if f = 63MPa, f, = 280 MPa and the net tensile strain is greater than 0.005, then the maximum steel ratio equal............ (a) 0.0406 (b) 0.0310 (c) 0.0287 (d) 0.0180 (e) None
The assembly consists of two red brass C83400 copper rods AB and CD having a diameter of 30 mm, a 304 stainless steel rod EF having a diameter of 40 mm, and a rigid member G. If the supports at A, C, and F each have a stiffness of k= 200 MN/m determine the average normal stress developed in the rods when the load is applied. A C -300 mm- 30 mm 30 mm B D G E 450 mm 40 kN 40 kN 40 mm F
The member consists of the steel rod AB that is screwed into the end of the bronze rod BC. Find the largest value of P that meets the following design criteria: (i) the overall length of the member is not to change by more than 3 mm; and (ii) the stresses are not to exceed 140 MPa in steel and 120 MPa in bronze. The moduli of elasticity are 200 GPa for steel and 80 GPa for bronze. A Steel 1.0 m A = 480 mm² В 3P Bronze A = 650 mm² 2 m 2P
A steel column is pin connected at the top and bottom which is laterally braced and subjected to transverse loading. It carries an axial load of 800 kN and a 70 kN-m moment. Use ASD. The steel section has the following properties: A = 13000 mm² r = 94 mm Ix = 300 x 106 mm4 Sx = 1200 x 103 mm³ L = 3.6 m Yield stress Fy = 248 MPa Axial compressive stress that would be permitted if axial force alone existed, Fa = 115 MPa Compressive bending stress that would be permitted if bending moment alone existed, Fb = 148 MPa Members subjected to both axial compression and bending stresses shall be proportioned to satisfy the following requirements: Mry + 9 Mex Mey Determine the axial compressive stress if axial load only existed. Pr 8 Mrx + Pe 75.82 MPa 61.54 MPa 33.96 MPa 16.25 MPa Determine the bending stress if bending moment alone existed. 76.25 MPa O58.33 MPa 13.33 MPa ≤ 1.0 16.59 MPa Determine the value of both axial and bending moment interaction value, considering the amplification due to…
Direct Stress Bronze Aluminum Steel A = 0.75 in.2 A = 1.0 in.? A = 0.5 in.? 3P 2F P 4P- -3 ft→ 5 ft 4 ft- 2. Axial loads are applied to the compound rod that is composed of an aluminum segment rigidly connected between steel and bronze segments. Find the largest safe value of P if the working stresses are 120 MPa for steel, 68 MPa for aluminum, and 110 MPa for bronze.
answer quickly