4.120 A rocket sled accelerates from rest on a level track with negligible air and rolling resistances. Theinitial mass of the sled is M, = 600 kk. The rocket initially contains 150 kk of fuel. The rocket motorkgburns fuel at constant rate m :15Exhaust gases leave the rocket nozzle uniformly and axially atSmVa = 2900relative to the nozzle, and the pressure is atmospheric. Find the maximum speed reachedSby the rocket sled. Calculate the maximum acceleration of the sled during the run.

Given:initial mass of sled, mo=600 kgmass of fuel, mf=150 kgfuel burn rate, m˙=15 kg/sexit velocity…

4.120 A rocket sled accelerates from rest on a level track with negligible air and rolling resistances. The nitial mass of the sled is Mo = 600 kk. The rocket initially contains 150 kk of fuel. The rocket motor kg burns fuel at constant rate ṁ = 15 Exhaust gases leave the rocket nozzle uniformly and axially at т Va = 2900 relative to the nozzle, and the pressure is atmospheric. Find the maximum speed reached by the rocket sled. Calculate the maximum acceleration of the sled during the run.

4.120 A rocket sled accelerates from rest on a level track with negligible air and rolling resistances. The nitial mass of the sled is Mo = 600 kk. The rocket initially contains 150 kk of fuel. The rocket motor kg burns fuel at constant rate ṁ = 15 Exhaust gases leave the rocket nozzle uniformly and axially at т Va = 2900 relative to the nozzle, and the pressure is atmospheric. Find the maximum speed reached by the rocket sled. Calculate the maximum acceleration of the sled during the run.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The pipe elbow below discharges water at rate of SN/100 (m3/s) into the atmosphere at section 2. The total volume of the passage between sections 1 and 2 is equal to 0.2 m3 and the total mass of the elbow material between sections 1 and 2 is equal to 10 x SN (kg). Neglect any friction losses. Calculate the horizontal and vertical forces acting on the elbow. Also, calculate the resultant force and angle of force on the elbow. ****SN=21
(3) The cart shown below is restrained from moving by a cable connected to a fixed wall. The tank has a circular cross section of diameter D and the flow exit has a circular cross section of diameter Do. Do not assume that H(t) is constant. The fluid has density p and the exit is open to the atmosphere. Wall H D- Do Cable Vo (1) Determine H(t) and the exit velocity Vo(t). (2) Determine the tension in the cable as a function of time Your answers should be in terms of given parameters (D, Do, p, g) о,
The jet of water (e = 1000 kg/m3 , Aj=0.005 m2, Vj=10 m/s) strikes a vane with an angle (0=60°) that moves to the right at constant velocity Vc = 3 m/s on a frictionless cart as shown in the figure. Determine the force Fx required to restrain the cart. p. Vj. Aj V= constant F Fx= 122.5 N Fx= 62.5 N Fx= 22.5 N Fx= 202.5 N
Is this answer correct?
Problem 5.2 A simple air duct with a side exhaust is shown below along with the direction of the velocity vectors at each inlet or outlet. The cross-sectional area at 1 and 3 are identical, Ac1 = Ac3 = 0.5 m². The velocity at 2, V₂, makes a 20° angle with the opening in the side of the duct A₂ = 0.5 m². Measurements indicate that the flow is steady with velocities V₁ = 10 m/s and V3 = 3 m/s. Assume that air behaves like an incompressible substance under these conditions. a) Determine the ratio of the volumetric flow rate at 2 to the volumetric flow rate at 1, /. b) Determine the ratio of the velocity at 2 to the velocity at 1, V₂/V₁. 1 20° Ans: a) 0.65 ≤ / ≤ 0.81 b) 1.75 ≤ V₂/V₁₂ ≤ 2.10
Express the unsteady angular momentum equation in vector form for a control volume that has a constant moment of inertia I, no external moments applied, one outgoing uniform flow stream of velocity V→, and mass flow rate m. .
A single-stage axial flow pump with outer radius r2 = 0.240 m and inner radius r1=0.120 m is given. At a radius of r =0.090 m, absolute flow flows in from the axial direction just before the impeller inlet and relative flow flows out in the axial direction just after the impeller outlet. Assuming a flow rate Q = 0.265 m^3/s, a water density p = 1.000 x 103 kg/m^3, a rotation speed n = 2.4 x 10^3 rpm, and a gravitational acceleration g = 9.81 m/s^2, and assuming that the theoretical head Hth = W/g (W: specific work) derived from Euler's law is constant at all impeller radii, answer the following questions. (1) Looking at the following image, find all values of the velocity triangle just before the impeller inlet and just after the impeller outlet at radius r =0.09 m. impeller Figure 37.1 A propeller of an axial flow pump a₁ w1 U₁ Outlet guide vane B₁ Impeller α₂ Vw2 U₂=U₂=U
4. A 16.50 ft. diameter by 32.8 ft. height tank is receiving water (p = 62.3 lbs/ft³) at the rate of 405 GPM and is discharging through a 6.0 in. ID Line with a constant velocity of 5.36 ft/sec. At given instant the tank is half full. Find the water level and mass change in the tank 29 minutes later. Ans. 13.366 ft; 40,415 lbs.
As6. N=35 N2=16 N3=16
Calculate the dimesions of a rocket nozzle(Area of throat, Area of exit, Length of converging side, Length of Diverging side), knowing that CO2 is the combustion gas with a chamber pressure of 2000000 Pa, T = 850 K and k = 1.2.
Two gases enter a combining tube and leave as a single mixture. . For the first gas, A₁=72in² V₁=205m/s V₁=120gal/lbm . For the other gas, A₂=48in² m2=20lbm/s P2=2kgm/m³ ● . At the exit, V3=320ft/s V2=9ft³/lbm Find the (a) velocity at section 2 in m/s, (b) mass flow rate at the exit section in kgm/s, and (c) area at the exit section in m².
Q6) A water jet hits horizontally a 50-kg block with a velocity of (20 m/s), see the figure. The friction coefficient between the block and the ground is (0.9). What is the minimum diameter (d) of the water jet required for the block to slide to the left?