4. Abbot and Costello are transporting a 0.125m3 cubic block along a ramp inclined at 20°. They tied the block under the midpoint of a 3m, 2kg, pole-arm. Abbot is at the lower end of the pole while Costello leads the pair up, holding the other end of the pole. Calculate the upward forces exerted by Abbot and Costello during the transport if the block weighs 1000N.

4. Abbot and Costello are transporting a 0.125m3 cubic block along a ramp inclined at 20°. They tied the block under the midpoint of a 3m, 2kg, pole-arm. Abbot is at the lower end of the pole while Costello leads the pair up, holding the other end of the pole. Calculate the upward forces exerted by Abbot and Costello during the transport if the block weighs 1000N.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Directions: Assume, unless otherwise specified, that all numbers have at least 3 significant figures. F (N) Students collect data, see graph, for the force involved in stretching a rubber band. The data is well fit by the equation F = 33.65 x0.4971, 12 10 where F is in newtons and x is in meters. One end of the rubber band is attached to a stationary vertical rod and the other end to a 0.3 kg mass. The mass rests on a frictionless horizontal surface. The mass is pulled back such that the rubber band is stretched by 0.8 m from its unstretched length and then released from rest. 4. x (m) 0,1 0.02 0.04 0.06 0.08 A. What is the speed of the mass after it has traveled 0.4 m? B. What is the maximum speed of the object?
Question 4 please
7
Abbot and Costello are transporting a 0.125m3cubic block along a ramp inclined at 20°. They tied the block under the midpoint of a 3m, 2kg, pole-arm. Abbot is at the lower end of the pole while Costello leads the pair up, holding the other end of the pole. Calculate the upward forces exerted by Abbot and Costello during the transport if the block weighs 1000N.
Statics and Torque 1. The figure shows a pair of forceps used to hold a thin plastic rod firmly. If the thumb and finger each squeeze with a force of Fr= FF= 11.0 M, what force do the forceps jaws exert on the plastic rod? Jaws Rod FT 8.50 cm 2.70 cm 2. A 75-kg adult sits at one end of a 9.0-m-long board. His 25-kg child sits on the other end. (a) Where should the pivot be placed so that the board is balanced, ignoring the board's mass? (b) Find the pivot point if the board is uniform and has a mass of 15 kg. 3. Calculate FA and Fg for the beam shown below. The downward forces represent the weights of machinery on the beam. Assume the beam is uniform and has a mass of 280 kg. FA 4300 N 3100 N 2200 N F 4.0 m-3.0 m 2.0 m 1.0 m 4. Three children are trying to balance on a seesaw, which includes a fulcrum rock acting as a pivot at the center, and a very light board 3.2 m long. Two playmates are already on either end. Boy A has a mass of 45 kg, and boy B a mass of 35 kg. Where should girl…
A 2.00 m long horizontal uniform beam of mass 20.0 kg is supported by a wire as shown in the figure. The wire makes an angle of 20.0 degrees with the beam. Attached to the beam 1.40 m from the wall is a ball with a mass of 40 kg. What is the tension in the string? a)1,000 Nb) 1,090 N c) 2,100 N d) 2,250 N e) 2,680 N
A uniform beam of length L = 7.10 m and weight 4.05 × 10² N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam. Sam Joe F F Sam II = -1.00 m N N Z Z -2.00 m- L
Learning material says that the answer is Ff = 244.29 N, but it didn't show how to get that answer. Other answers found on this site say it's 1646.45 N. Which one is the wrong answer? How is it wrong? Please enlighten me. Thank you.
What's the force on each rope if the person is standing 1.75 m from one end?
A model airplane with a mass of 0.65 kg flies at the end of a 60 m cable in the horizontal plane at a speed of 35 m / s. The aircraft connecting rope rotates at an angle of 20 degrees to the horizontal. what is the tensile force on the rope? The buoyancy force that lifts the aircraft is perpendicular to the wings. g=9,8
A fence post of mass m = 8 kg supports a fence with three lengths of barbed wire. The bottom wire is a distance d = 0.35 m from the ground and each wire is a distance 0.35 m above the previous one. Each of these three wires has the tension on it. For this problem, assume that the force exerted by these wires is purely horizontal. An additional guy wire is used to keep the pole upright with a tension of Fa = 490 N. The guy wire attaches to the post at a point h = 0.86 m above the ground and makes an angle of θ = 45 with respect to the horizontal. Write an expression for the tension in any one of the three fence wires. What is the normal force that the ground exerts upward on the post?
A tall rectangular cabinet with two "feet" has a mass of 38.5kg. It is pushed using a horizontal force of 111N. If the force is applied at a height of greater than 1.05m above the ground, the cabinet begins to tip over. The width of the cabinet (distance between the 2 feet) is m. LL F > N₁ CM N₂ mg