2. A steady flow, steady state thermodynamic system receives 45 kg/min of a fluid at 207kPa and discharges it from point 24 m. above the entrance section at 1034 kPa. The fluid enters with a velocity of 36.6 m/s and leaves with a velocity of 12 m/s. During this process, there are supplied 7 kW of heat from an external source, and the increase in enthalpy is 3.6 kJ/kg. Determine the work in kW and in horsepower. Answers: 3.82 kW, 5.22 hp a. the change in Potential Energy in kW O 176.5 0.4483 O 0.1765 b. the change in Kinetic Energy in kW -448.335 -0.4483 O 0.4483 c. the work (Wsf) in kW 4.57 3.83 5.22 d. the work (Wsf) in horsepower 6.12 5.22 4.57

2. A steady flow, steady state thermodynamic system receives 45 kg/min of a fluid at 207kPa and discharges it from point 24 m. above the entrance section at 1034 kPa. The fluid enters with a velocity of 36.6 m/s and leaves with a velocity of 12 m/s. During this process, there are supplied 7 kW of heat from an external source, and the increase in enthalpy is 3.6 kJ/kg. Determine the work in kW and in horsepower. Answers: 3.82 kW, 5.22 hp a. the change in Potential Energy in kW O 176.5 0.4483 O 0.1765 b. the change in Kinetic Energy in kW -448.335 -0.4483 O 0.4483 c. the work (Wsf) in kW 4.57 3.83 5.22 d. the work (Wsf) in horsepower 6.12 5.22 4.57

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: I need parts 8, 9, and 10 answered. Number 1 is an example of how it should be answered. NOTE: Read…

A: (8) Four 0.562” diameter of drill (through holes), each with 0.625” counter bore diameter with spot…

Q: solve and show every step with right answer

A: Data given - Rectangular cross section 225×75 mm2 Torsional moment = 20kN Axial Compressive force =…

Q: What is a microcontroller? 1. General purpose device that can be programmed to carry out a finite…

A: Given question is related to electromechanical devices and controllers.

Q: An amount of Php 4000 is deposited in a bank paying an annual interest rate of 5 % compounded…

A: Compound interest (also known as compounding interest) is the interest on a loan or deposit that is…

Q: Cardinal Financing lent an engineering company Php 500,000 to retrofit an environmentally unfriendly…

Q: can you solve the question with hand written notes in details

Q: solve by showing every step.

A: Given data: The ultimate tensile strength of component is Sut = 30 ksi. The ultimate compression…

Q: What are the different types of force? Applied Tension Gravitational Spring Air Resistance Normal…

A: (I) Force has been classified on the basis of contact which is as follow 1. Contact force:- These…

Q: 1) 20N/m 60 N/m 4 m 2 m 2)

Q: I need help solving these 3 simple parts, if you can not answer all 3 parts then please leave it for…

A: Consider the first question:Detail drawing is a drawing that contains all the information…

Q: I need answers to questions 7, 8, and 9 pertaining to the print provided. Note: A tutor keeps…

A: In general revision changes are indicated in two methods.Cloud method- the recent change information…

Q: 27. You have the following compound machine. For and What is the ideal mechanical advantage of this…

A: We have to calculate compund machine

Q: can tutor continue the next two questions also

Q: I need answers for 7,8, and 9,

A: A 0.250”X0.250” square hole.

Q: N

A: Given: To find: Correct rotation code

Q: can tutor explain the what is all of the equations means and also answer the next 2 questions

A: To solve the physics problems, let's break them down one by one:1) Calculate the force experienced…

Q: A 25 ft long solid steel rod is subjected to a load of 10,000 Ib. This load causes the rod to…

A: Data given - L = 25 ft = 25 × 12 P = 10000 lb ∆L = 0.477 in E = 30 × 106 psi

Q: 2) Orthogonal Cutting: Consider a person who is shoveling snow from the sidewalk. This person can…

A: To find: The ratio of the force for shovel A to the force for shovel B.Given:Coefficient of friction…

Q: Please help. Written on paper not typed on computer or keyboard please. Need help on both…

A: Approach to solving the question: Detailed explanation:Examples: Key references:

Q: Let me know if I have misinterpreted the question.

A: in this question all the help full values are given.In this question plate slider due to impact…

Q: Problem 5: Write the MOST equation for the task and calculate the Standard time for the process (in…

A: Given question: Write the MOST equation for the task and calculate the Standard time for the process…

Q: You are tasked to check the safety factors for the bolt designs for the connection shown with an…

A: Find outSafety Factor for the Bolt DesignCalculate the required torque to bring the bolts to the…

Q: Problem 4: Refer to the data below. Calculate the net present worth (NPW) of the project. Initial…

A: Initial cost= $35,000A= Annual benefits= $ 5,000n= Useful life= 10 yearsS.V= saving value= $10,000r=…

Q: What is the ideal mechanical advantage of this system? The inclined plane dimensions are 7.2 meters…

A: Solution: Note: Dear Student! As per our guidelines, we are only allowed to answer three sub-parts…

Q: Where did you get the 3 from for the distance of q?

Question

100%

Solve question no.2 and show a clear and organized solution. Answer a, b, c, and d. Also, write the GIVEN and REQUIRED. Thanks!!!

2. A steady flow, steady state thermodynamic system receives 45 kg/min of a
fluid at 207kPa and discharges it from point 24 m. above the entrance section at
1034 kPa. The fluid enters with a velocity of 36.6 m/s and leaves with a velocity of
12 m/s. During this process, there are supplied 7 kW of heat from an external
source, and the increase in enthalpy is 3.6 kJ/kg. Determine the work in kW and in
horsepower. Answers: 3.82 kW, 5.22 hp
a. the change in Potential Energy in kW
176.5
0.4483
O 0.1765
b. the change in Kinetic Energy in kW
-448.335
-0.4483
0.4483
c. the work (Wsf) in kW
4.57
3.83
5.22
d. the work (Wsf) in horsepower
6.12
5.22
4.57

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Needs Complete typed solution with 100 % accuracy.
Hi, Could you please help with this question, if you need to take more credits then please feel free. showing working out if possible too please, Thank you
Please give a steps by steps explanation of each question answer please. Thanks you so much
Paula has worked for Brindle Corporation for 3 years. During this time, she has worked as a machine operator/cell leader in various work cells. Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months. Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel. These tubes get a hole punched in them, a flange welded on, and burrs ground off. The pipe then gets placed into a gage to check that it was made correctly. (The tubes weigh about six pounds.) Paula has been performing the welding operation. She leans into the machine and loads the part into a fixture then positions the flange. Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons. The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position of the hole and a…
Can someone help me to solve the following problem showing all work thank you!
Paula has worked for Brindle Corporation for 3 years. During this time, she has worked as a machine operator/cell leader in various work cells. Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months. Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel. These tubes get a hole punched in them, a flange welded on, and burrs ground off. The pipe then gets placed into a gage to check that it was made correctly. (The tubes weigh about six pounds.) Paula has been performing the welding operation. She leans into the machine and loads the part into a fixture then positions the flange. Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons. The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position of the hole and a…
Summary/Conclusion Discuss the strengths of your design and how it met the specifications. Discuss your assumptions and why they are valid. Discuss what you might change about your design in a redesign effort. Format: The project should be presented as a design report using a word processor. Include any hand calculations in an appendix. More details will be provided. Choose to design either a slip-jaw or channel-lock pliers to last for 25 years of use by a professional. Use an appropriate tool steel for the pliers. Design for 95% male grip force. Use a minimum factory of safety of 2.50. Determine dimensions not given. Slip Jaw Pliers A= 9.00 inches B=1.00 inches C= ? D=1.25 inches H= 1.875 Inches D B A