---### Summary/Conclusion**Discuss the strengths of your design and how it met the specifications. Discuss your assumptions and why they are valid. Discuss what you might change about your design in a redesign effort.**### Format:The project should be presented as a design report using a word processor. Include any hand calculations in an appendix. More details will be provided.---### Task Description**Choose to design either a slip-jaw or channel-lock pliers to last for 25 years of use by a professional. Use an appropriate tool steel for the pliers. Design for 95% male grip force. Use a minimum factor of safety of 2.50. Determine dimensions not given.**---### Slip Jaw Pliers Diagram and DimensionsThe image below shows the layout and measurements for a pair of slip-jaw pliers. Below the diagram, certain dimensions are provided, while others need to be determined:- **A = 9.00 inches**- **B = 1.00 inches**- **C = ?** (*dimension to be determined*)- **D = 1.25 inches**- **H = 1.875 inches**![Slip Jaw Pliers Diagram](image description)**Diagram Explanation:**1. The diagram shows a side view of a pair of slip-jaw pliers.2. Dimension **A** (9.00 inches) represents the overall length of the pliers.3. Dimension **B** (1.00 inch) indicates the width of the gripping jaws.4. Dimension **C** is not given and needs to be determined.5. Dimension **D** (1.25 inches) shows the thickness of the gripping jaws.6. Dimension **H** (1.875 inches) depicts the height of the pliers from the joint pivot to the bottom handle.---Please refer to the forthcoming detailed instructions for precise dimension calculations and other design guidelines.

Choose to design either a slip-jaw or channel-lock pliers to last for 25 years of use by a professional. Use an appropriate tool steel for the pliers. Design for 95% male grip force. Use a minimum factory of safety of 2.50. Determine dimensions not given. Slip Jaw Pliers A= 9.00 inches B=1.00 inches C= ? D=1.25 inches H= 1.875 Inches D B -A

Choose to design either a slip-jaw or channel-lock pliers to last for 25 years of use by a professional. Use an appropriate tool steel for the pliers. Design for 95% male grip force. Use a minimum factory of safety of 2.50. Determine dimensions not given. Slip Jaw Pliers A= 9.00 inches B=1.00 inches C= ? D=1.25 inches H= 1.875 Inches D B -A

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: (12) What is the value of F? (A) 7.53 N; (B) 8.03 N; (C) 8.53 N; (D) 9.03 N; (E) 9.53 N.

A: 12. According to the given data, Pressure is similar for both cylinders. Therefore,

Q: A 4.8 m long from fixed point, 0.5 m wide and assumed a thickness of 30 mm throughout a springboard…

A: “Since you have posted a question with multiple sub parts, we will provide the solution only to the…

Q: Problem 6 You've been asked to design a stamping tool as shown. What are the internal forces at A…

A: FBD

Q: Match each of the following terms to the phrase that describes it. Answers are used only once.

A: The correct match is: Drill spot - 3Countersink - 6Knurl -…

Q: Draw the assembly views of the following G Clamp from a front view and top view. Provide a standard…

A: To Draw the assembly views of the following G Clamp from a front view and top view.

Q: Don't Copy any wrong solution, Solve it fast within 20-30minutes. 1) A double threaded power screw…

Q: 12 mm wrench fit over the head of a bolt that is 1/2" across

A: Given: Wrench size =12 mm Bolt size =1/2" AF (across the flat) To determine: Whether the wrench is…

Q: Design for 95% male grip force. Use a minimum factory of safety of 2.50. Determine dimensions not…

A: By using the above data and some engineering principles, we can calculate the value of dimension C…

Q: If the basic diameter of shaft is 20mm with -0.02mm unilateral tolerance, and diameter of hole is…

Q: Complete the needed calculations and enter the needed values in the given table. All problems are…

Q: Instructions: Identify the tapered and drive axle bearing parts in the drawing. Place the…

A: Tapered roller bearings contain tapered inner and outer ring raceways with tapered rollers…

Concept explainers

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.

Question

---

### Summary/Conclusion

**Discuss the strengths of your design and how it met the specifications. Discuss your assumptions and why they are valid. Discuss what you might change about your design in a redesign effort.**

### Format:
The project should be presented as a design report using a word processor. Include any hand calculations in an appendix. More details will be provided.

---

### Task Description

**Choose to design either a slip-jaw or channel-lock pliers to last for 25 years of use by a professional. Use an appropriate tool steel for the pliers. Design for 95% male grip force. Use a minimum factor of safety of 2.50. Determine dimensions not given.**

---

### Slip Jaw Pliers Diagram and Dimensions

The image below shows the layout and measurements for a pair of slip-jaw pliers. Below the diagram, certain dimensions are provided, while others need to be determined:

- **A = 9.00 inches**
- **B = 1.00 inches**
- **C = ?** (*dimension to be determined*)
- **D = 1.25 inches**
- **H = 1.875 inches**

![Slip Jaw Pliers Diagram](image description)

**Diagram Explanation:**

1. The diagram shows a side view of a pair of slip-jaw pliers.
2. Dimension **A** (9.00 inches) represents the overall length of the pliers.
3. Dimension **B** (1.00 inch) indicates the width of the gripping jaws.
4. Dimension **C** is not given and needs to be determined.
5. Dimension **D** (1.25 inches) shows the thickness of the gripping jaws.
6. Dimension **H** (1.875 inches) depicts the height of the pliers from the joint pivot to the bottom handle.

---

Please refer to the forthcoming detailed instructions for precise dimension calculations and other design guidelines.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Analyzing the given data

VIEW

Step 2: Finding thickness of the jaw

VIEW

Solution

VIEW

Step by step

Solved in 3 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Correct and complete solution please
What is the LMC of shaft C?
Below question is from machine design. Please solve asap. You have to select bearings which are used to support a shaft, bearings are mounted at each end of shaft and 1.20 metre apart. A 600 mm diameter pulley is mounted at a distance of 300 mm to the right of left hand bearing and this drives a pulley directly below it with the help of belt having maximum tension of 2.25 kN. Another pulley 400 mm diameter is placed 200 mm to the left of right hand bearing and is driven with the help of electric motor and belt, which is placed horizontally to the right. The angle of contact for both pulleys is 180º and .Allowing working stress of shaft depends on the material you have selected for the shaft. Select the type of bearing mounted on both ends of shaft (either ball or roller bearing type and also elaborate the scenario for the selection of bearing).The Reliability Factor for Bearing may vary from 92% till 96%
Please provide the given, step by step manual solution, units, and drawing for below given Machine Elements II problem. It is generally recommended and normal for a designer to add a hunting tooth to evenly distribute the wear on meshing teeth like a 53 teeth mesh with 30 teeth pinion. Find the rotation of pinion to mesh same pair of teeth again.
I need help with 5,6 and 9.
for Eye Bolt jotat Given F= 5KN upa Sy = 300 Pa S= 4 Find! d
The toleranced diameter of a hole is given as 0.990"/1.010" and the size of the mating pin is given as 0.985"/0.980 37. What is the maximum clearance for this fit? 0.030" 0.020" 0.025" c) 0.010" (P 38. What type of fit is this? transition b. clearance interference d. none of the above 39. A fit can be determined by specifying: upper limit b. allowance max. clearance b& c all the above TE d. 40. A fit is specified as 60H1109 in Metric unit. What is the tolerance grade for the shaft? 60 a. b. 9 11 d. none above
Complete the hole specification including a position tolerance of .018" diameter at MMC relative to primary datum feature A, secondary datum feature B, and tertiary datum feature C.
I will rate helpful. Thank you.
Please show all work for a & b.
Two blocks A and B, each having a mass of 5.5 kg , are connected by pins using the linkages shown. A В 0, 02 The coefficient of static friction between Block A and the floor is u A= 0.21. The coefficient of static friction between Block B and the floor is µB= 0.44. The angles given are 01 = 45 degrees 02 = 28 degrees Neglect the weight of the links. i. Draw the Free Body Diagrams for pin C, Block A, and Block B. ii. Applied force P on pin C is gradually raised. Which block starts slipping first and what is the value of P when slippage starts occurring? Hint: It helps to establish two cases, one in which block A slips and one in which block B slips, and then calculate what occurs in each case in order to determine what happens. Part A - Part A Draw the Free Body Diagram for link C. Note that for this problem we are looking at the starting location of the vectors. Draw the vectors starting at the gold dot at point C. The location of the starting point as well as the orientation of your…
10. The design life of a bearing used in a shaft of an industrial blower is around 20,000 h. How many number of revolutions is this equal to if the shaft rotates at 600 rpm? 3 x 108 6 x 108 4 x 108 7 x 108 a. b. 11. For a D/d ratio of 1.5, which combination of fillet radius and smaller shaft diameter will you consider it as a well rounded fillet? 0.4 and 20.0 b. 2 and 10.5 a. b. C. d. 12. Which combination of sheave diameters and center of less than 9.5 inches? 2, 8, 10 2.5, 10, 10 C. d. c. d. 3.0 and 100 both b and c distance results in a length of span between two sheaves 4, 10, 10 Answer is not among the choices