1) Among the following distress types, select a distress which is pot observed inAsphalt Concrete (AC) pavements.a) Bleedingb) Crackingc) Faultingd) Flushinge) Ravelingf) Rutting2) Among the following four types of PCC pavements, what is suffered due topunchout taking place between two parallel random cracks or at the intersectionof Y cracks?a) JPCPb) JRCPc) CRCPd) PCP3) Joint sawing time is very important to prevent early age cracking and raveling inJPCP and JRCP. What is not a factor affecting joint sawing windows for jointedconcrete pavements?a) Thicknessb) w/c ratio of concretec) Temperatured) Subbase materiale) Aggregate sizef) Curing method4) There are four different types of joint used in PCC pavements. What is the jointused in case of emergence or machine breakdown?a) Contraction jointsb) Expansion jointsc) Construction jointsd) Longitudinal joints

"Since you have asked multiple question, we will solve the first question for you. If you want any…

Answered: 1) Among the following distress types,…

1) Among the following distress types, select a distress which is not observed in Asphalt Concrete (AC) pavements. a) Bleeding b) Cracking c) Faulting d) Flushing e) Raveling f) Rutting

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: A group of students have noted that the sidewalks on Temple Street have more cracks than those…

A: Hypothesis: The observation that the sidewalks on Temple Street have more cracks than those located…

Q: II. Identification. Identify the following terms 1. a little covered opening in a floor, pavement,…

A: It is asked to identify the terms for given explanation

Q: pav ndex once operational must be 4.2, and is projected to reliability for design is 95% with an…

A: Given: Thickness of the asphalt wearing surface D1 = 4 In Wearing surface layer coefficient, a1 =…

Q: Which of the following is NOT one of the five primary causes of pavement deterioration? O…

A: This question is related to the Road Pavement from Highway and Traffic Engineering. In this question…

Q: Write a note on *High-strength Cloggir Resistant Permeable Pavements under adverse Physio-Chemical…

A: Solution: The high-strength clogging resistance permeable pavement consists of the plastic tube and…

Q: Discuss root causes and remedial measures of the following distresses occurring in flexible…

A: Flexible pavement is the pavement in which various layers of road deflects or bends under the load…

Q: Which Performance Grade asphalt binder would work best in resisting low temperature cracks and which…

A: Three modes Pavement failures occurs throughout its life which are-1.Rutting (it occurs at high…

Q: Elaborate restoration process of pavement rehabilitation techniques and suggest the suitability of…

Q: Describe these five (5) types of pavement deformations (A-E) and then discuss the causes and propose…

A: A) Potholes Reason: Potholes is developed in the pavement due to the usage of poor quality material…

Q: For road or airfield pavements, what are the effort for control or protection has frequently used?

A: Most protection activities on the airport pavements are typical to all forms of pavement. » Removal…

Q: One of the unbound pavement layer road base materials is “Dry-bound Macadam”. When is this material…

A: Traditionally, a covering of stone that is approximately one size and has spaces covered with such a…

Q: Which of the following defects can occur if lack of tack coat is applied during the * road…

A: A tack coat is primarily used an adhesive material that is applied in the between layers of asphalt…

Q: Dose the time of loading effect on the asphalt behaviour? Explain. What is the RC-70 meaning? Where…

A: Solution: 1. Yes, the time of loading will affect asphalt behavior. There is an analysis which was…

Q: (6) Two AC-20 asphalt concrete core samples sample has a diameter of 4 inches and a thie (a) If the…

Q: Q9. The preventive rehabilitation technique is that which involves: a) surface applications of…

Q: Using two layer theory, calculate magnitude and location of the maximum deflection in the pavem due…

A: ∆= 23.0388 inches

Q: a) You have to repair the wearing surface during wet weather using asphalt which can be used without…

A: Solution: Explanation:

Q: Civil Engineering - Be able to explain rigid pavement responses Be able to explain critical rigid…

A: Concrete is an adaptable development material, which is gotten by solidifying a combination of…

Q: Please solve all the questions asked

A: **Q3: Purposes**1. **Tie Bars**: In concrete pavements, tie bars serve as connectors between…

Q: 11. The range of typical terminal serviceability indices (pt) used in design of highway pavements…

A: Given, Multiple choice questions regarding highway design

Q: Failure of Rigid pavements, their cause and repair

Q: Take a look at the many techniques available for assessing the quality of bitumen used in flexible…

A: Introduction: Bitumen is a thick, viscous petroleum-based hydrocarbon found in deposits like oil…

Q: You are currently working for the City and you have to select a performance grade asphalt binder for…

Q: What function does the pavement construction serve? Discuss in detail the many layers that comprise…

A: Pavement construction serves a number of functions which are given below:- 1. It provides a smooth…

Q: rigid pavement on a new interstate with 3 lanes i ach direction has been conservatively designed ith…

A: According to given data A rigid pavement on a new interstate with 3 lanes in each direction has…

Q: An interstate highway pavement composed of asphalt surface course, cement treated base course and…

A: Step 1:Step 2:Step 3:

Q: a) State component of quality assurance and control in road construction.

A: As per our rules we only answer the first question. Kindly resubmit your question with second part…

Q: What function does the pavement construction serve? Discuss in detail the many layers that comprise…

A: Introduction: Transportation engineering applies technological and scientific principles to the…

Q: 1- The very thin layer of asphalt emulsion between an existing surface layer and the overlaying…

Q: asphalt cement with penetration grade (80-100) can lead to bleeding on pavement surface more than…

A: Given Asphalt Penetration Grades are: 1 is 80-100 and other is 60-70

Q: Potholes are small in the pavement surface which penetrate all the way down to the layer. They…

A: Potholes are small depression in the pavement which penetrate all the way down to the HMA layer.They…

Q: Fatigue cracking and stresses on asphalt structure induced to an interlaced cracking pattern and…

A: The flexible pavement is consist of a series of layers such as subgrade, subbase course, base…

Q: which type of asphalt pavement deterioration represented in the picture below?

A: Given the picture of a type of pavement deterioration, To find We are asked to find the type of…

Q: The flexible pavement cross-section shown in Figure 2 was determined by the Asphalt Institute…

A: The Structural Number (SN) represents depicts the overall structural requirement needed to sustain…

Q: Design a flexible pavement (granular pavement with thin bituminous surfacing) for the given…

A: Given that :-Design traffic = 6,000,000 ESACBR = 1.5Use a sprayed seal surfacing layer of less than…

Q: Which is better in terms of maintenance and usability flexible pavement? concrete pavement? concrete…

A: Solution: Maintainance: Concrete pavements are considered to be the most economical in terms of…

Q: please help with transportation problem. please make sure it is correct. Will thumbs up if correct.

A: Step 1:Step 2:Step 3:

Q: During asphalt pavement inspection of link (100*15) M, from desert road in Jordan during, (15*9) m?…

A: Given data 15×9m2 low 15×9.5m2 low

Q: Problem 4 (15pts) Compute the dust proportion for asphalt mixture having the following properties…

Q: As a Highway Engineer, explain why the quality of materials in the flexible pavement increases from…

A: Given data: Highway engineering Flexible pavement.

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

1) Among the following distress types, select a distress which is pot observed in
Asphalt Concrete (AC) pavements.
a) Bleeding
b) Cracking
c) Faulting
d) Flushing
e) Raveling
f) Rutting
2) Among the following four types of PCC pavements, what is suffered due to
punchout taking place between two parallel random cracks or at the intersection
of Y cracks?
a) JPCP
b) JRCP
c) CRCP
d) PCP
3) Joint sawing time is very important to prevent early age cracking and raveling in
JPCP and JRCP. What is not a factor affecting joint sawing windows for jointed
concrete pavements?
a) Thickness
b) w/c ratio of concrete
c) Temperature
d) Subbase material
e) Aggregate size
f) Curing method
4) There are four different types of joint used in PCC pavements. What is the joint
used in case of emergence or machine breakdown?
a) Contraction joints
b) Expansion joints
c) Construction joints
d) Longitudinal joints

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

what are the root causes and remedial measures of the following distresses occurring in flexible pavements: Slippage failure, Potholes, Rutting and its types, Bitumen bleeding
Q, Discuss the following terms briefly: a, Emulsion breaking and Cutback curing, b, Water bound and aggregate base, c, Flexible pavement and Rigid pavements,
1. The severity of flexible pavement cracks is classified based on the depth of the crack 2. In thick pavements with alligator cracking, the cracks most likely initiate from the tonp down to the bottom. 3. The pavement bleeding distress occurs when there is insufficient bitumen binder in the Hot Mix. 4. The distress usually caused by traffic (starting and stopping) called corrugation. 5. The end result of the Fatigue (alligator) cracking is the Raveling distress. 6. Faulting is longitudinal only and creates a "step" deformation of the rigid pavement. 7. The severity of rigid pavement cracks is classified based on the width and the frequency of the crack. 8. In pavement treatments we always aim to improve ride quality, provide surface drainage and friction, and correct surface distresses and irregularities. 9. The slab cracking is an unplanned longitudinal or diagonal structural crackis) that extend through the depth of the slab. 10. A heavily rutted pavement can generally left…
A pavement consists of 5 inches of asphalt underlain by a crushed stone based course. There is no sub base. The asphalt has an elastic modulus of 350,000 psi at room temperature and the base course has a CBR of 70. Determine the thickness of the crushed stone base needed to reach an SN of 2.85. Assume the base course is saturated 5% of the time and drains within a day.
Give me both right choices with explanation. Urgent please
An agency uses the following formula to determine pavement condition rating, PCR = 99.3 5.51 (5.0-ROUGH) 1.59 LNALL 0.221 AVGOUT 0.0306 LONG where we have the following. ROUGH = roughness measured by present serviceability rating (PSR), scale of 0 to 5 LNALL = natural logarithm of alligator cracking, ft per mile AVGOUT = outer wheel path rutting (all locations averaged), 0.01 inch LONG = longitudinal cracking, ft per mile TRAN = transverse cracking, number of cracks per mile And, present serviceability rating is determined as the following. PSR = 5e-0.0051118 IRI-0.0016027 A pavement section has the following distress data. IRI = 106 in./mi Alligator cracking 110 ft/mi Average rutting = 0.20 in. Longitudinal cracks = 130 ft/mi Transverse cracks = 12/mi Determine the current PCR for this section. PCR = 0.531 TRAN, Now, assume a new roughness measurement is expected soon. When PCR falls below 60, the section will be scheduled for rehabilitation. Determine the new IRI value (in in./mi)…
Please show all of your work and give the correct answer.
Please kindly answer both.. please give me both answers
Q#1 What is the primary function of the pavement structure? Why do we use high quality materials as we go from bottom to top of the pavement structure? Discuss various tests used for the quality of bitumen used in flexible pavements. Discuss various tests used for the quality of aggregate used in flexible pavements.
Subject : Transportation Engineering Give me both a and b right solutions A 5 tonne wheel load is applied on a pavement and generates a surface deflection of 0.15 mm. (a) If the equivalent radius of tyre contact is 100 mm and Poisson’s ratio is 0.3, what is the pavement’s modulus of elasticity? (b) If the pavement is 125 mm thick, what is the vertical stress at the top of the subgrade?