The exergy destruction for each of the processes of the cycle

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 9.12, Problem 147P

To determine

The exergy destruction for each of the processes of the cycle

Expert Solution & Answer

Answer to Problem 147P

The exergy destruction associated with process 1-2 is 19.2 kJ/kg.

The exergy destruction associated with process 5-3 is 38 kJ/kg.

The exergy destruction associated with process 3-4 is 16.1 kJ/kg.

The exergy destruction associated with process 6-1 is 85.5 kJ/kg.

The exergy destruction associated at regenerator is 0.41 kJ/kg.

Explanation of Solution

Draw the T−s diagram of the regenerative Brayton cycle as shown in Figure (1).

THERMODYNAMICS: ENG APPROACH LOOSELEAF, Chapter 9.12, Problem 147P

Write the expression for the temperature and pressure relation for the isentropic process 1-2.

T2s=T1rp(k−1)/k (I)

Here, the pressure ratio is rp, and the specific heat ratio is k.

Write the expression for the efficiency of the compressor (ηC).

ηC=cp(T2s−T1)cp(T2−T1) (II)

Here, the specific heat at constant pressure is cp.

Write the expression for the temperature and pressure relation ratio for the expansion process 4-5s.

T5s=T4(1rp)(k−1)/k (III)

Write the expression for the efficiency of the turbine (ηT).

ηT=cp(T4−T5)cp(T4−T5s) (IV)

Apply first law to the heat exchanger.

mcp(T3−T2)=mcp(T5−T6)(T3−T2)=(T5−T6)T6=T5+T2−T3 (V)

Write the expression for the net work done per kg for the Brayton cycle with regeneration (wnet).

wnet=cp(T4−T5)−cp(T2−T1) (VI)

Here, the specific heat at constant pressure is cp.

Write the expression of heat addition to the regenerative Brayton cycle (qin).

qin=cp(T4−T3) (VII)

Write the expression for rate of heat rejection in the regenerative Brayton cycle (qout).

qout=cp(T6−T1) (VIII).

Write the expression for the exergy destruction during the process of as steam from an inlet to exit state.

xdestroyed=T0sgenxdestroyed=T0(se−si−qinTsource+qinTsink)

Write the expression of exergy destruction for process 1-2 (xdestroyed,1-2).

xdestroyed,1-2=T0(cplnT2T1−RlnP2P1) (IX)

Here, pressure at state 2 is P2, the pressure at state 1 is P1 and surrounding temperature is T0.

Write the expression of exergy destruction for process 5-3 (xdestroyed,5-3).

xdestroyed,5-3=T0(cplnT3T5−RlnP3P5−qinTsource) (X)

Here, pressure at state 5 is P5 and the pressure at state 6 is P6.

Write the expression of exergy destruction for process 3-4 (xdestroyed,3-4).

xdestroyed,3-4=T0(cplnT4T5−RlnP4P3) (XI)

Here, pressure at state 7 is P7

Write the expression of exergy destruction for process 6-1 (xdestroyed,6-1).

xdestroyed,6-1=T0(cplnT1T6−RlnP1P10−qoutTsink) (XII)

Here, pressure at state 10 is P10 and temperature at state 10 is T10.

Write the expression of exergy destruction for regenerator (xdestroyed,regen).

xdestroyed,regen=T0(Δs2−5+Δs4−6)xdestroyed,regen=T0(cplnT5T2+cplnT6T4) (XIII)

Conclusion:

Substitute 20°C for T1, 8 for rp and 1.4 for k in Equation (I).

T2s=(20°C)(8)1.4−1/1.4=(20+273)K (8)1.4−1/1.4=530.8 K

Substitute 20°C for T1, 530.8 K for T2s and 0.87 for ηC in Equation (II).

T2=20°C+585 K−20°C0.87=(20+273)K+585 K−(20+273)K0.87=566.3 K

Substitute 800°C for T4, 8 for rp and 1.4 for k in Equation (III).

T5s=(800°C)(18)1.4−1/1.4=(800+273)K×(18)1.4−1/1.4=592.3 K

Substitute 800°C for T4, 592.3 K for T5s and 0.93 for ηT in Equation (IV).

T5=800°C−(0.93)(800°C−592.3 K)=(800+273)K−(0.93)[(800+273)K−592.3 K]=625.9 K

The cold airstream (T3) leaves the regenerator 10°C cooler than the hot airstream (T5) at the inlet of the regenerator.

T3=T5−10 (XIV).

Substitute 625.9 K for T5 in Equation (XIV).

T3=(625.9 K−273 °C)−10°CT3= 352.9°C−10°C

T3= 342.9 °C=(342.9 +273) K= 615.9 K

Substitute 615.9 K for T3, 625.9 K for T5 and 566.3 K for T2 in Equation (V).

T6=625.9 K+566.3 K−615.9 K=576.3 K

Substitute 1.005 kJ/kg⋅K for cp, 800°C for T4, 625.9 K for T5, 566.3 K for T2 and 20°C for T1 in Equation (VI).

wnet=(1.005 kJ/kg⋅K)[(800°C−625.9 K) ]−[(566.3 K−20°C)]=(1.005 kJ/kg⋅K)[((800+273)K−625.9 K) ]−[(566.3 K−(20+273)K)]=174.7 kJ/kg

Substitute 1.005 kJ/kg⋅K for cp, 800°C for T4 and 615.9 K for T3 in Equation (VII).

qin=(1.005 kJ/kg⋅K)(800°C−615.9 K)=(1.005 kJ/kg⋅K)[(800+273)K−615.9 K]=459.4 kJ/kg

Substitute 1.005 kJ/kg⋅K for cp, 576.3 K for T6 and 20°C for T1 in Equation (VIII).

qout=(1.005 kJ/kg⋅K)(576.3 K−20°C)=(1.005 kJ/kg⋅K)[576.3 K−(20+273)K]=284.7 kJ/kg

Substitute 20°C for T0, 1.005 kJ/kg for cp , 566.3 K for T2 , 20°C for T1 , 0.287 kJ/kg⋅K for R and 8 for (P2P1) in Equation (IX).

xdestroyed,1-2=20°C((1.005 kJ/kg)ln566.3 K20°C−(0.287 kJ/kg⋅K)ln(8))=(20+273)K((1.005 kJ/kg)ln566.3 K(20+273)K−(0.287 kJ/kg⋅K)ln(8))=19.2 kJ/kg

Thus, the exergy destruction associated with process 1-2 is 19.2 kJ/kg.

Here, (P3=P5)

Substitute 293 K for T0, 1.005 kJ/kg⋅K for cp , 1073 K for T3 , 615.9 K for T5 ,0.287 kJ/kg⋅K for R , 459.4 kJ/kg for qin and 1073 K for Tsource in Equation (X).

xdestroyed,5-3=293 K((1.005 kJ/kg⋅K)ln1073 K615.9 K−(0.287 kJ/kg⋅K)ln(P5P5)−459.4 kJ/kg1073 K)=293 K((1.005 kJ/kg⋅K)ln1073 K615.9 K−0−459.4 kJ/kg1073 K)=38 kJ/kg

Thus, the exergy destruction associated with process 5-3 is 38 kJ/kg.

Substitute 625.9 K for T4, 1.005 kJ/kg⋅K for cp , 1073 K for T5 , 293 K for T0 , 0.287 kJ/kg⋅K for R and 18 for (P4P3) in Equation (XI).

xdestroyed,3-4=293 K((1.005 kJ/kg⋅K)ln625.9 K1073 K−(0.287 kJ/kg⋅K)ln(18))=16.1 kJ/kg

Thus, the exergy destruction associated with process 3-4 is 16.1 kJ/kg.

Here,(P1=P6)

Substitute 520 R for T0, 1.005 kJ/kg⋅K for cp , 576.3 K for T6 , 520 R for T1 , 0.287 kJ/kg⋅K for R , 284.7 kJ/kg for qout and 293 K for Tsink in Equation (XII).

xdestroyed,6-1=293 K((1.005 kJ/kg⋅K)ln293 K576.3 K−(0.287 kJ/kg⋅K)lnP6P6−qout293 K)=293 K((1.005 kJ/kg⋅K)ln293 K576.3 K−0−284.7 kJ/kg293 K)=85.5 kJ/kg

Thus, the exergy destruction associated with process 6-1 is 85.5 kJ/kg.

Substitute 615.9 K for T5, 1.005 kJ/kg⋅K for cp , 625.9 K for T4 , 576.3 K for T6 , 566.3 K for T2, and 293 K for T0 in Equation (XIII).

xdestroyed,regen=(293 K)×1.005 kJ/kg⋅K(ln615.9 K566.3 K+ln576.3 K625.9 K)=0.41 kJ/kg

Thus, the exergy destruction associated at regenerator is 0.41 kJ/kg.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

In an ideal Brayton cycle with regeneration, air is compressed from 80 kPa and 10°C to 400 kPa and 175°C, is heated to 450°C in the regenerator, and is then further heated to 1000°C before entering the turbine. Under cold-air-standard conditions, the effectiveness of the regenerator is (a) 33 percent (b) 44 percent (c) 62 percent (d) 77 percent (e) 89 percent

P

In an ideal Brayton cycle with regeneration, argon gas is compressed from 100 kPa and 25°C to 400 kPa, and then heated to 1200°C before entering the turbine. The highest temperature that argon can be heated in the regenerator is (a) 246°C (b) 846°C (c) 689°C (d) 368°C (e) 573°C

Answer 2