A horizontal plank 4.00 m long and having mass 20.0 kg rests on two pivots, one at the left end and a second 1.00 m from the right end. Find the magnitude of the force exerted on the plank by the second pivot.

A horizontal plank 4.00 m long and having mass 20.0 kg rests on two pivots, one at the left end and a second 1.00 m from the right end. Find the magnitude of the force exerted on the plank by the second pivot.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 33PQ: Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a...

See similar textbooks

Related questions

Q: The figure shows three boards clamped together. The center board weighs 93.5 N, and the coefficient…

A: The figure shows the force acting on the three boards clamped together.

Q: A gymnast with mass 46.0 kg stands on the end of a uniform balance beam as shown in the figure. The…

A: Concept Apply the torque concept Torque=Distace*Force

Q: A door has a height of 2.2 m along a y axis that extends vertically upward and a width of 0.803 m…

Q: One end of a uniform beam that weighs 2.95 ✕ 102 N is attached to a wall with a hinge pin. The other…

Q: m uniform ladder weighing 490 N rests against a frictionless wall. The ladder makes a 59.00-angle…

Q: A horizontal beam of length 4.08m and weight 130N is attached to a vertical wall at a right angle.…

A: Given data The length of the beam is L = 4.08 m. The weight of the beam Wb = 130 N. The length of…

Q: A 3 m long weightless beam is supported at each end by cables. A painter weighing 900 N stands 1 m…

A: Given data: Length of beam is, L=3 m. Weight of painter is, Wp=900 N. Distance of painter from left…

Q: A 1220-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the…

A: a) Balance torque about left end TSin(50°+30°)L = (1960LCos30°)+(1220×LCos30°/2) T = 2260 N

Q: A 1460-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the…

Q: A fisherman has caught a fish on his pole, and to keep the pole steady he has to apply an upward…

Q: A uniform horizontal beam 5.00 m long and weighting 3.03 102 N is attached to a wall by a pin…

A: Please check the values of weights given in the problem and the values shown in the free body…

Q: weight angle o above the rod. The other end rests on a small frictionless support and presses into a…

A: given:weight of rod, w = 74.0 Nlength L = 2.85 mtension in the cable = Langle = 340

Q: Figure is attached (a) A person stands a distance d = 0.475 m from the left end of a plank as shown…

A: Given data: The weight of person is W=705 N. The distance of man is d=0.475 m. The length of board…

Q: A uniform beam of length 12.0 m and weight 690 N is connected to a wall by a bolt, and is supported…

Concept explainers

Rotational Equilibrium And Rotational Dynamics

In physics, the state of balance between the forces and the dynamics of motion is called the equilibrium state. The balance between various forces acting on a system in a rotational motion is called rotational equilibrium or rotational dynamics.

Equilibrium of Forces

The tension created on one body during push or pull is known as force.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A beam with a length of 2 m and a mass of 10 kg supports a 50 kg box. The beam is connected to a wall by a hinge at its base and a horizontal wire. The wire is connected to the beam 1.5 m from the hinge and makes an angle θ of 35o to the beam. The goal is to find the tension in the wire and the horizontal and vertical components of the force exerted by the hinge on the board
A horizontal plank 4.00 m long and having mass 20.0 kg restson two supports, one at the left end of the plank and a second1.00 m from the right end of the plank. What is the magnitude of theforce exerted on the plank by the support on the right side?
A 14.0 m uniform ladder weighing 490 N rests against a frictionless wall. The ladder makes a 59.00-angle with the horizontal. (a) Find the horizontal and vertical forces (in N) the ground exerts on the base of the ladder when an 820-N firefighter has climbed 4.10 m along the ladder from the bottom. horizontal force magnitude 284.46 X N direction towards the wall vertical force magnitude 1310 direction up N (b) If the ladder is just on the verge of slipping when the firefighter is 9.40 m from the bottom, what is the coefficient of static friction between ladder and ground? 425 X (c) What If? If oil is spilled on the ground, causing the coefficient of static friction to drop to half the value found in part (b), what is the maximum distance (in m) the firefighter can climb along the ladder from the bottom before the ladder slips? 2.61 m
A 10.5 kg board 6.00 m long is supported by two sawhorses, one at each end. A 4.45 kg saw sits on the board 1.80 m from the left end. Find the upward force that the LEFT sawhorse exerts on the board. (Unit = N)
One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an angle of ? = 37.0°above the rod. The other end rests on a small frictionless support and presses into a wall as shown in the figure. Determine the magnitude n of the vertical normal force exerted by the support on the rod and find the magnitude T of the tension in the cable.
One end of a uniform beam that weighs 3.45 ✕ 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in the figure below. Find the horizontal and vertical components of the force exerted by the hinge pin on the beam. (Assume ?1 = 27° and ?2 = 32°. Indicate the direction with the sign of your answer. Assume that the +x direction points horizontally outward from the wall and that the +y direction points up along the wall.)
A beam with length of 2 m and a mass of 10 kg supports a 50 kg box. The beam is connected to a wall by a hinge at its base and a horizontal wire. The wire is connected to the beam 1.5 m from the hinge and makes an angle θ of 35o to the beam. The goal is to find the tension in the wire and the horizontal and vertical components of the force exerted by the hinge on the board. Suppose the maximum tension that the wire can withstand is 1500 N. What is the maximum load that the hinge can support before the wire breaks?
A uniform beam with a length of 2.50 meters and a mass of 85.0 kg rests on two ropes. A person of mass 65.0 kg is standing on the far right end of the beam. The beam is not moving.Calculate the tension in the rope on the left, in Newtons (N).Calculate the tension in the rope on the right, in Newtons (N).
One end of a uniform beam that weighs 2.95 ✕ 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in the figure below. Find the horizontal and vertical components of the force exerted by the hinge pin on the beam. (Assume ?1 = 23° and ?2 = 38°. Indicate the direction with the sign of your answer. Assume that the +x direction points horizontally outward from the wall and that the +y direction points up along the wall.) Fhorizontal __________ Fvertical _________
A uniform horizontal beam 5.00 m long and weighting 3.03 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person weighing 6.05 102 N stands 1.60 m from the wall, find the magnitude of the tension in the cable and the force exerted by the wall on the beam. T = N Rx = N Ry = N Even if we selected some other axis for the torque equation, the solution would be the same. For example, if the axis were to pass through the center of gravity of the beam, the torque equation would involve both T and Ry. Together with Equations (1) and (2), however, the unknowns could still be found—a good exercise. In this example, notice the steps of the Problem-Solving Strategy could be carried out in the explicit recommended order.QUESTION What happens to the tension in the cable if the man in Figure (a) moves farther away from the wall? The tension would…