A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 x 10 N and length L = 3.40 m as shown in the figure below. The ladder rests against the wall at an angle of 6 = 60°. The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that is frayed and that can support a maximumtension of only 80.0 N.Rope(a) Draw a force diagram for the ladder. (Submit a file with a maximum size of 1 MB.)(b) Find the normal force exerted on the bottom of the ladder.N(c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder.N(d) Find the maximum distancethat the monkey can climb up the ladder before the rope breaks.m(e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem be changed and what other information would you need to answer Parts (c) and (d)?

Answered: Image /qna-images/answer/a08daf50-af48-4bde-8e52-499604cc69a7.jpg

A 10.0-kg monkey climbs a unform ladder with weight w1.09 x 10 Nand lengthL340 mas shon in the figure belo. The ladder rests against the wall at an angle of 60. The upper and lover ends of the ladder rest on frictionless surfaces. with the lower end fastened to the wall by a horiaontal rope that is frayed and that can support a maximum tension of enly 80.0 N. (a) Drawa force diagram for the ladder. (Submit a fle with a maimum sie of : MB.) (b) Find the normal force eerted on the bottom of the ladder (e) Find the tension in the N the monkey is bethirds of the way vo the ladden (d) Find the maximum distance d that the monkey can cimb up the ladder before the rope breaks. (e) f the horiaontal surface were rough and the rope were removed. how would your analysis of the problem be changed and what other information would you need to anser Parts (c) and (d)?

A 10.0-kg monkey climbs a unform ladder with weight w1.09 x 10 Nand lengthL340 mas shon in the figure belo. The ladder rests against the wall at an angle of 60. The upper and lover ends of the ladder rest on frictionless surfaces. with the lower end fastened to the wall by a horiaontal rope that is frayed and that can support a maximum tension of enly 80.0 N. (a) Drawa force diagram for the ladder. (Submit a fle with a maimum sie of : MB.) (b) Find the normal force eerted on the bottom of the ladder (e) Find the tension in the N the monkey is bethirds of the way vo the ladden (d) Find the maximum distance d that the monkey can cimb up the ladder before the rope breaks. (e) f the horiaontal surface were rough and the rope were removed. how would your analysis of the problem be changed and what other information would you need to anser Parts (c) and (d)?

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

(a) A man stands a distance d = 0.250 m from the left end of a board as shown in the figure. The board is supported by three cords. Find the tension in each cord (in N). Assume the board is uniform, with length L = 2.00 m and mass 32.5 kg, and the weight of the man is 690 N. (Due to the nature of this problem, do not use rounded intermediate values-including answers submitted in WebAssign-in your calculations.) 子。
A long, uniform 2 kg rod of length 1.8 m is supported at the left end by a horizontal axis into the page and perpendicular to the rod, as shown. The right end is connected to the ceiling by a thin vertical thread so that the rod is horizontal. Thread 1.8 m Horizontal Аxis 2 kg Determine the magnitude of the force ex- erted on the rod by the axis. The acceleration of gravity is 9.8 m/s² , and the moment of in- ertia of the rod about the axis at the end of the rod is 3 Answer in units of N.
A uniform ladder weighing 490 N rests against a frictioniess wall. The ladder has a length L = 14.0 m and makes a 59.0° angle with the horizontal ground. An 820 N firefighter has climbed d = 4.20 m along the ladder from the bottom. Find the coefficient of static friction Hs between the ladder and the ground. O 0.863 O 0.225 O 0.119 O 0.332 O 0.567
End A of the bar AB inFig. rests on a frictionlesshorizontal surface, and end Bis hinged. A horizontal force F S ofmagnitude 220 N is exerted on endA. Ignore the weight of the bar. Whatare the horizontal and vertical componentsof the force exerted by thebar on the hinge at B?
35.0° Dinysics Demos SuDDly Co. The pole is held horizontally by a massless wire under 305 N of tension, connected at a 35° angle. A 8 kg sign hangs from the end of the 4 meter pole. The pole has mass 4 kg. How far away is the wire is attached from the wall? Answer in meters to 3 sig figs.
A taho vendor carries a 1.5 m long light plank over his shoulder. At the ends of the plank are two buckets weighing 40 N and 60 N respectively. (a) Find the value of force F exerted by his shoulder. Neglect the weight of the plank. ( b) Where should he support the plank for it to be balanced horizontally
Determine the magnitudes of the forces C and T, which, along with the other three forces shown, act on the bridge-truss joint. C COS 20 с T sin 40 C SIN20 16 kN 3 kN 40° T cos 40 -x 8 kN FX= 8-16+Tcos 40+C sin 20=0 Fy= -3 +T sin 40-C cos 20=0
A 6.0 m long ladder AB leans against a smooth wall making an angle of 60º with the floor (Figure 3). The ladder is uniform and has a mass of 20.0 kg.(a) Determine the forces exerted on the ladder by the floor and the wall (i.e. at A and B, respectively).(b) Determine the minimum value of the coefficient of static friction to prevent the ladder from slipping.
The diagram shows a sign that wighs 50 N hanging from a uniform horizontal pole. The pole weighs 30 Newton's and it is 1.6 m long. Determine the tension in the supporting cable C and the magnitude and direction of the two component forces at the pivot, P, exert on the pole.
A shelf bracket is mounted on a vertical wall by a single screw. S S2 S1 Neglecting the weight of the bracket, and if s = 6.4 cm, s1 the horizontal force component exerted on the bracket by the screw when a 95.2 N vertical force is applied as shown. Imagine that the bracket is slightly loose. 5.4 cm and s2 = 2.2 cm, find =
A scaffold of mass 71 kg and length 4.8 mis supported in a horizontal position by a vertical cable at each end. A window washer of mass 64 Kg stands at a point 2.4 m from one end. What is the tension in (a) the nearer (relative to the person) cable and (b) the farther (relative to the person) cable? (a) Number Units
В 2. A 2.4 m ladder rests on a vertical wall as shown in the figure. The ladder has seven rungs and the rungs are spaced 0.30 m apart, and the top and bottom rungs are 0.30 m from their respective ends of the ladder. Surfaces at A and B both have the same coefficient of friction. If a worker weighs 630N and stands on the middle rung, determine the minimum value of the coefficient of friction so that the ladder does not slide. Neglect the weight of the ladder. ,0=60° A