Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.2 and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 1x 10 Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency. (d) the mass flow rate of cooling water, in lb/h.

Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.2 and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 1x 10 Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency. (d) the mass flow rate of cooling water, in lb/h.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: REGENERATIVE CYCLE WITH ONE CLOSED HEATER: Fill up the blanks with your answers below. 1. A steam…

Q: Water is the working fluid in a

Q: Steam is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 10 MPa…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lb/in² and…

Q: Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…

Q: ater is the working fluid in a Rankine cycle that produces 125 MW of power. The superheated vapor…

Q: In a cogeneration system, a Rankine cycle operates with steam entering the turbine at 800 lb/in.2,…

Q: Water is the working fluid in a Rankine cycle with reheat. Superheated vapor enters the turbine at…

A: The objective of the question is to determine the total heat addition, the percent thermal…

Q: Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater.…

Q: working fluid in an ideal Rankine cycle. The sa 8.0 MPa and saturated liquid exits the conden e net…

Q: Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and…

Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in² and…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

STEP 4 PLS
In a cogeneration system, a Rankine cycle operates with steam entering the turbine at 800 lb/in.², 700°F, and a condenser pressure of 180 lb/in.² The isentropic turbine efficiency is 90%. Energy rejected by the condensing steam is transferred to a separate process stream of water entering at 250°F, 140 lb/in.2 and exiting as saturated vapor at 140 lb/in.2 The mass flow rate of the process stream is 48,000 lb/h. Let To -70°F, po - 14.7 lb//in.² Step 1 Determine the mass flow rate for the working fluid of the Rankine cycle, in lb/h. mcycle Step 2 Hint W Your answer is correct. cycle = 54852.5 Determine the net power output for the cycle, in Btu/h. Hint Step 3 Your answer is correct. 7087421.984 € = i lb/h eTextbook and Media Save for Later Btu/h Evaluate an exergetic efficiency for the overall cogeneration system. The exergetic efficiency is defined as the net rate of exergy output divided by the net rate of exergy input. Attempts: 1 of 4 used % Attempts: 2 of 4 used Attempts: 0 of 4…
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 5.5 x 108 Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent…
Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 8 MPa, 5608C with a mass flow rate of 7.8 kg/s and exits at 8 kPa. Saturated liquid enters the pump at 8 kPa. The isentropic turbine efficiency is 88%, and the isentropic pump efficiency is 82%. Cooling water enters the condenser at 188C and exits at 368C with no significant change in pressure. Determine: (a) the net power developed, in kW. (b) the thermal efficiency. (c) the mass flow rate of cooling water, in kg/s
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.² and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.² and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 lbf/ in.², but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.² and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.² before entering the steam generator. The net power output of the cycle is 1x 10⁹ Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent…